Having problems with your Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum ?

7920 ProHeat replace red pulley on the pump

\015 I need to replace the red pulley on the pump that the belts connect to. The brush belt burned the gears. Where can I get the part? thnx, Rabar\015

Answers :

I did ALL the suggested things and then discovered the belt was stretched because the Red thing on the pulley of the pump is stripped. Its not turning the shaft in the pump. I am going to put glue in mine and see if that works, if not, ill order a new pump assembly.
Pulley only comes with the pump. So you have to replace it, \015\012\015\012\015\012\015\0122107181 it will cost about $30
Repair Help & Product Troubleshooting for Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

7920 ProHeat replace red pulley on the pump


I did ALL the suggested things and then discovered the belt was stretched because the Red thing on the pulley of the pump is stripped. Its not turning the shaft in the pump. I am going to put glue in mine and see if that works, if not, ill order a ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Bissell proheat clearview red pump pulley


Yes, it should be spinning and driving both belts. If it is not you would need to have it fixed by a service center. This should be covered if your machine is still in warranty. Here is a link to find your nearest BISSELL Authorized Service Center ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Bissell ProHeat - red pump pulley


Hi Vickie. Yes, the red pump pulley should be rotating. If it's not the pump will need to be replaced by a qualified tech at one of our Authorized Service Centers. Here's a quick link to assist you locating one in your area: ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Schematics I went to replace the belt, and when I put it back on I noticed the silver pulley that the brush belt goes on has came unattached from the red piece by the motor belt. It is one peice. I can order a new pump, but I need the schematics so I can replace the pump. http://www.vacuums24x7.com/bistclpa.html How can I enlarge this so i can read it?


Well you can right click the picture and save it to your desktop, I did it, but it was alittle blurry. But if this doesn't work for you, post me your email addy and I can send you a better picture. But take the top off, there are 6 screws, 3 on ea ... Bissell 8910 ProHeat Clear View Upright Vacuum

Bissell 7950 ProHeat Self Propelled Carpet cleaner Replacement Pump Belt part 215-0628


Normally, there is a post sticking out of the retainer to remove it. If the post is broken off, then you will have to lift the black arm and wiggle it at the same time and the retainer will pop up so you can remove it. On the belt side, the retainer ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell Proheat Clearview 8905 pump replacement


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Proheat pump key


No; the new pump has a metal pulley which is more durable then red plastic pulley. be sure to place a 3/4 thick x 10 inch long (small shelf works) piece of wood under housing before removing top. ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I have a bissell proheat carpet cleaner purchased in 4-18-2005 for $169.99 from kohls I have used it 6 times and the last time the brushes would not move cause the belt was broken and the end of the pump pulley which is plastic broke off so I reorder the pump unit and 2 new belts and now I see you have sent me a exact pump but the end that broke off that the belt rides on is made of steel or aluminum much strong piece of equipment I want to know if there was a recall for the machine due to mecha


I've owned my Bissell for over 5 years now & LOVE it! Even after vacuuming It pulls up tons of dog hair I never realized was there! I am having a similar problem, but I caused it myself & think maybe you may have the same problem, cross you ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Hi my proheat bissell 7901 stopped pumping water to the floor, but it pumps water from the hand hose. I read the manual and followed how to check belt and the flat belt on right side of shampooer is fine and I turned on and it turns and so do the brushes at the bottom of the machine. I was reading online and I guess there's two belts on this machine? where can I find the other belt to see if it needs replacing. I guess it's a ribbed belt? that is the water pump belt?


Just taken ours apart with the same problem... found it was caused by the 2 halves of the main casing coming apart in the area where the upright pedal release is. I found this to be due to the upper casing having broken in 2 places - the bottom of th ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

New replacement pump on Bissell ProHeat Protech not working


Made a mistake, my model # is bissel 7901. Won't spray water.\015\012When you turn the machine on, it sprays for a minute or so then stops. All belts are in place..water tanks and spray bottle positioned correctly. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Proheat 8910, just used once, pump belt keeps breaking. I replaced it two times, there is a burning smell and then when I look at the pump belt, its broken.


... Bissell 8910 ProHeat Clear View Upright Vacuum

My Bissel proheat carpet cleaner wont spray out of the bottom or the spray handle. I took of the scrub brushes and off and cleaned out the bottom of the machine including popping out the two spray heads to make sure they were not clogged. Put it back together. Still no spray! I also did the turn off, remove fluid containers, replace, turn on for one minute to prime the pump, and still so spray...does this mean my pump is not working?


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Bissell proheat 7920 replacement pump


Part number is 2107181, it will cost around $30. Most local shops shoul have this part or can order it for you. You could try bissell.com. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

How do you replace the pump on the bissell 7920 proheat pro-tech


It could be the pump, but try these othere things first, to replace the pump, you have to take the top cover off to get to it.\015\012Does water squirt out of the hose nozzle, if it does, then check the heater inside the handle asm. Make ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

I am trying to replace the pump belt on my Bissell Proheat 12 AMP moedel #7901-9. I was told this was the easy one to change, but it is only if you know where it goes and how to put it there. Can you give me some help? Pam


Here is a link to where you can view the manual. Hope it helps!Bissell ProHeat Belt and Manual ... Vacuums

I replaced pump and put back together now it wont release any soap// bissell proheat 7901


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Replaced the pump for a 9300 M Bissell Proheat 2x as the water solution was not releasing to the carpet. Once rehooked the lines the solution appears to be coming from the water tank and returning to the used tank and bypassing spraying on the carpet. How can I be sure the hoses are hooked up correctly?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a bissell proheat model number 7901 is there somewhere i can get a replacement pump?


I found the part online but I just can't figure out how to put it in there. I was quoted by a professional for 79.00, found the part for 29.99 ... Vacuums

I replaced pump and put back together now it wont release any soap// bissell proheat 7901


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Replace pump - Bissell 8910 ProHeat Clear View Upright Vacuum


Six (6) on board/top screws approx. Two (2) in front near nozzle area and four (4) under water resevoir tank. Engage handle release and lie handle down on floor and take out screws and save (of course) You will need to also unscrew clear water cap fr ... Bissell 8910 ProHeat Clear View Upright Vacuum

Unit is not pumping water out - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


This is most commonly caused by the rubber belt being broken, as the belt powers the main pump. \015\012\015\012Check the belt, (through the access door on the side of the machine,) and if it appears worn or stretched, (or is broken or ab ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Replaced the pump and solenoid on my Bissell Proheat, model 9200 H, but not sure I got the tubing connected back right. Can anyone help me with this?


... Bissell 9200 Upright Vacuum

I have a broken pump belt on my bissell powersteamer proheat. The belt was just laying in there. I have a new one but no where in the manual does it tell you how to replace it and where! Help


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum

I just replaced the pump on my bissell proheat and now it spray's water all the time how do i fix it


The pump wiring may not have been reattached correctly.\015\012\015\012Sometimes the trigger can get stuck, so try working that back and forth a few times. Power cycle the machine (unplug it) and try again. ... Bissell 8910 ProHeat Clear View Upright Vacuum

Replace pump belt


If you go onto the Bissell website (www.bissell.com) , click on the "contact us" link then look at the lower right corner fo the screen there are several "how to" videos. Changing ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0519 seconds