Having problems with your Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum ?

How do I fit new diverta..

\015 I have a Bissell Pro Heat 7920E carpet cleaner and the diverta flap arm broke. I have the new part but need advice on how to locate the arm into the spring loaded clip on the end of the diverta knob. Very limited space, can't get hand inside and don't want to do any further damage by pulling at plastic clips. Is there a trick to this?\015\012Thanks for your help\015\012Phil\015

Answers :

Usually this can go one of two ways, very easily, or absolutely a pain. You will need needle nose pliers, and patience. When I am in the shop working on these machines, it's always a matter of not getting frustrated, and using eccessive force.
\015\012If there is a coil spring you will want to pull that back gently, and place the arm back into place, always be gentle and patient. Then you may have to use a flat head screw driver to push the arm into final position.. again.. be patient, and gentle... this is all plastic except for the spring of course.
\015\012I hope this helps.
Repair Help & Product Troubleshooting for Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I fit new diverta..

Usually this can go one of two ways, very easily, or absolutely a pain. You will need needle nose pliers, and patience. When I am in the shop working on these machines, it's always a matter of not getting frustrated, and using eccessive force.\ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Miele SES125 electeic hose kinked/collapsed. Can I buy just a hose with a wire in it and put fittings from collapsed hose on new piece of hose?

... Miele SES125 Electric Hose

Trying to fix new belt to Hoover Turbo Power vacuum cleaner. Don't see how the belt becomes taut. Fitting it around the roller, there is nowhere to fit the belt to, it just sits loose.

I looked at the user instructions guide online and saw where the 'other end' of the belt should be fitted. It was extremely hard to fit but eventually managed it. Thanks for this solution site. I wouldn't hesitate to use it again. ... Hoover U5396-900 Turbo Power Vacuum

Dyson fan belt fitting. i've lost my manual for my dyson animal dc07 and need to fit a new drive belt. thanks in advance, alan

You can see this on utube video. help ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a model 1315 sears sewing machine and have a new walking foot that doesn't seem to fit or allow me to stitch.......is there a fix? The walking foot is a kenmore brand and we thought it would fit all kenmores?

I am sure that you realize that it has to be for a low shank machine and that you have to take off the presser foot and use the screw to clamp the walking foot on, and the fingers must be on the take up lever screw. Be sure to check the shank size. ... Vacuums

I have a Flotec shallow well FP4122-08. A burglar stood on the pump this summer to gain access to my goats building (window). There's a small black tube that came off at both ends. When I put the tube back on, it shoots right back off as soon as the pump is plugged in. I don't know the name of the part (tube) to order a new one, and I don't know if it just plugs onto the fittings of both ends, or goes into the pump at the end with the round fitting on it.

... Vacuums

I have Optima, 12amp Eureka vacuum, Model 431, AXZ type and the extension hose for cleaning corners and edges --the plastic part that the attachments fit into has a piece broken off and tools don;t fit anymore. It looks like the hose attachment can be replaced--can it be and if so--where can I get a new hose attachment. It seems it is cheaply made of plastic and really shouldn't have broken a piece off.

... Eureka 431A Optima Bagless Upright Vacuum

I have bought new Hoover bags on two occasions. The first spares I bought were the Xxxl variety and I didn't think they fitted that well. The next spares I bought were the type g megafilt. I still feel like they do not fit that well and the suction power on the vacuum is not as good. I'm I buying the correct replacements? I followed the guidelines on the Hoover bags the vacuum came with. These were printed as the right bags to buy. I only have the vacuum around a year and thought it was brillian

... Bosch BSG71310UC Bagged Canister Vacuum

Just tried to fit a new belt to a vax quicklite 2 upright hoover and the belt snapped is there a right way to fit belt

... VAX Appliances Vax X3 Bagless Upright Vacuum

RE: Miele Art Vacuum When putting on a new bag there's a gap between the bag and the fitting that's a part of the vacuum itself. Is there supposed to be a gap or is there something I'm not doing that will fasten the bag to the fitting?

... Miele ART S920 Bagged Upright Vacuum

I'm trying to use the reverse flow hole on my Miele s712 to blow up an air mattres. None of my fitting appear to fit so I can use the hose. Is there something I'm missing? Is there a trick of the trade? Or am i missing some gear. It's new, out of the box but I just can't get the hose onto the reverse flow. The Poduct is a Miele S712 vacuum dispite what this system has allowed me to enter. ; )


I need to fit a new fan to my kirby g4 but

I wouldn't recommend doing this yourself. If you had to ask how, that's proof you shouldn't bite this one off. Take it to a vac shop. This is a very involved repair. A vacuum professional can easily do it, but it would cause you great stress and hear ... Kirby G4 Bagged Upright Vacuum


Hi Pauline,I'm sorry to hear you're having difficulty fitting your new cyclone pack. If it won't empty when you pull the trigger, you may want to check you have the clear bin and cyclone pack aligned and fitted together correctly.You ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Problem fitting new motor into dyson dc07 casing

Hi.\015\012\015\012There is try this site http://dysonmanuals.inc.io/ ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

New Filters have been fitted on the Sebo automatic XI

OK - I'm a Sebo expert, and we will get to the bottom of this! I need you to do one thing for me: lie the machine on one side, then switch it on and look to see if the brush roller is revolving - KEEP FINGERS and all loose items WELL CLEAR. Does the ... Sebo Automatic X1 Bagged Upright Vacuum

How do i fit new brushes in dyson dc 07 have the

You have got to open the motor housing that isthe black casing that surounds the motor first then the motor comes out then you can see the brushes thay come out by lifting the copper strip up gently with a screwdriver then you pull it out then put i ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do I fit a new duct lower motor cover?

Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My vax rapide xl ultimate v-027y brushes not working..new belt fitted and same problem

Hello i have a vax rarid xl carpet cleaner when you switch power on just makes a buzzing noise can you help thanks ... VAX Appliances Vacuums

Fitting a new dust bag

... Vacuums

How to fit a new dust bag to SC65A Sanyo vacuum cleaner

... Sanyo Vacuums


... Dyson DC33 Multi-Floor Upright Bagless Vacuum Cleaner

How can sebo X4 be dismantled to fit a new cable

... Sebo Vacuums

Fitting a new clutch.

Hi.\015\012\015\012Yes it can be replaced.\015\012Its a lot to explain so try this site It has manuals to do this job.\015\012\015\012http://dysonmanua ... Dyson DC14 Full Access Bagless Upright Cyclonic Vacuum

Fitting a new electricity cord

The cord has been damaged, how do I replace a new one, what parts have to be dismantled to get to the inside of the cleaner ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Kirby hoover can you tell me hop i get roller of head to fit new belt. many thanks

Turn the latch to release the nozzle as. Take off the bottom plate, remove the brush roll, check it while you have it out, put a new belt over the brush roll and reinstall back into the nozzle, belt should be in the center, put the bottom plate back ... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0567 seconds