Having problems with your Bissell 8910 ProHeat Clear View Upright Vacuum ?

Bissell pro heat 2 puts out too much soap

\015 I just replaced the punp in a bissell pro heat steam cleaner. I did a room no problem. I stopped it. Started another room no soap no water and that little red thing on top barly spins, the hand attachement spits out water for about 5-10 seconds. I took apart again looked for crimps in the hoses seemed fine. I read about priming the pump I did that, worked okay... now i dont think the water is comming out fast enough, it spray out well,when I refill the solution and start it up again the soap is gone in seconds...when I had it apart I sucked a blew the hoses inside, blew off the jet sprays... is there pressure build up, no pressure\015

Answers :

Repair Help & Product Troubleshooting for Bissell 8910 ProHeat Clear View Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How much soap and how much water do I put in the Bissell pro heat?


You are supposed to buy the Bissell soap. On the bottle depending which cleaner you need. The directions are on the bottle. Please do not use house hold cleaners because you can cause serious damage to the vacuum.\015\012Go here, this pg. shows ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell pro heat 2 puts out too much soap


... Bissell 8910 ProHeat Clear View Upright Vacuum

We have a bissell pro heat and the soap dispensor puts out way to much too fast. It fills the bladder with bubbles in seconds. How do we fix?


There is a setting on the unit, near the floor. You can set it to spray HI, LO or ONLY Water. You can set it accordingly between settings too.\015\012\015\012Hope this info was helpful to you. Good Luck! ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell pro heat- I put the soap dispenser in and it all comes out the bottom of machine in about 2 min. The machine isn't on. It just drains through to the floor. Whats wrong?


... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

I was given a Bissell Pro Heat Turbo 2x Microban carpet cleaner, but I don't have the instructions on how to use it. It's Model 9300-1. I would like to know how much carpet cleaner I should put in it.


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

BISSELL HELP Have bissell pro heater it would put out water but it will put out soap. How CAN I FIX IT ?


Usually when you can't put out soap, there is a problem with the vale at the bottom of the dispenser, or the seal is not on it and gone or sitting in the hole, needs to be on the dispenser. Same is true for the wter tank valve and seal. ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

No spray My Bissell Pro Heat 7901 will not put out any spray. I Took the pump out so I could get at it and disconnected the hoses. I put the one on the input side and the other in a bottle of water. Put the belt on the pump and turned on the machine .Nothing at all coming out of the pump. Where can I get a new pump? Also the lever that goes to the little flapper at the top under the clear plastic piece on the front that connects to the knob that changes from tools to floor broke off. Where can I


Pump part number is 2107181, the diverter valve # 2136988. You can Bissell and they can tell you who may have parts near you, or you maybe able to order thru Bissell.com. Before you took it apart, were you getting water to spray out of the hose. I ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

No spray My Bissell Pro Heat 7901 will not put out any spray. I Took the pump out so I could get at it and disconnected the hoses. I put the one on the input side and the other in a bottle of water. Put the belt on the pump and turned on the machine .Nothing at all coming out of the pump. Where can I get a new pump? Also the lever that goes to the little flapper at the top under the clear plastic piece on the front that connects to the knob that changes from tools to floor broke off. Where can I


Search for bissell pro heat pump. bissell.com will not have it ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell pro heat 2x will not put down water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I just got this euro pro shark steam mop. I dont have a manual for it so i dont know much about it. I put water in it and it heats up but when you start to use it. It makes a gurgling kind of sound and steam comes out, but not very much i dont think and on the floor you can't hardly tell where you went over the floor at cuz it's not very wet at all. So is it suppose to make a gurgling sound and should'nt the floor be alittle wetter?


Call Shark. They have good cust. support. ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My Pro heat 2x by Bissell does not put out or **** up water Brand is Bissell. Model is 8920 12 amp


Please check the following with liquid in both tanks.\012 \012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\012- Check for de ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Bissell Pro Heat 7901 will spay through hose but not the floor and red flow indicator will not spin. So we took the housing off and after unclogging a hose running to the hearter, my husband unhooked the hose that goes to the flow indicator, blew in it and it started spinning. Put the deep cleaner back together, tried to use it and nothing. What else can we try? Can't afford to put it in the shop right now. Thanks in advance.


I borrowed my friends bissell to clean my carpet. It's the 7901. He brought it over and told me that it only sprayed out of the attachment hose. He said he couldn't figure out what was wrong. I'm no vacuum technician but, I am a mechnic. I decided to ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Where do i put the water and solution for my bissell pro heat pow


User manuals are available at the bissell web site. on the customer care page. ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Bissell pro heat 2x not dispensing water or soap


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

My pro bissell heat leaks.


The pop sound was an electrical component blowing inside the vacuum, probably one of the capacitors on the motor control board.Water is not leaking from the tank, water is getting released because the motor is not generating enough power ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I HAVE A 7901 MODEL BISSELL PRO HEAT AND WILL NOT DISPENCE THE WATER AND SOAP WHEN TIGGER IS PRESSED MOST OF THE TIME, WILL DO IT ONCE AND A WHILE


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I cant figure out how to put a new belt on my Bissell pro heat


Hi,Please elaborate your problem providing us with more details and the complete make and model number of your product.Thanks for using FixYa. ... Vacuums

I need instruction manuel for bissell pro heat 8910 steam cleaner i do not know how to put the belts back on


Water don't come out ... Bissell 8910 ProHeat Clear View Upright Vacuum

We have bissell pro heat and I have put new belts on and took off the top plastic cover I blew out the lines and I still can't get it to pump water or solution. The red little spinner flow indicater does'nt get water, if I pour water into it it runs out the front. I guess I don't know what else to do. The machine worked fine the last time we used it about 6 months ago. Any suggesttions?


Did you check and make sure the belt is still on right? They do come off from time to time.There are like 6 long screws holding the top cover to the bottom. The are real pain in the behind to put back together once you take them off. T ... Bissell Vacuums

When I clean my carpets and hold the trigger only water comes out, there is no soap leaving the container . I have a Bissell pro heat 2X carpet cleaner.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a Bissell Pro Heat 2X carpet cleaner, and it won't dispense the water and soap. It's only 2 years old, so certainly should still be working.


You need to check that the motor drive belt is OK and turning freely to drive the water pump - under the flap on the right side at the front as you look at the front of the Bissell. If this is OK have you filled the cleaning bottle with fluid e ... Vacuums

Bissel Pro heat Plus is not spraying the soap onto the floor..


... Bissell Vacuums

The bissell pro heat I am useing uses to much cleaning solution


Hi there SmartAlec from NelsonVacuums.com.au here,your question seems to be cut short but i think you were going to say it uses too much shampoo. If this is the case then t ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Help Please help,I do not have a how to use guide. Can you tell me how to use this thing?It is a "Bissell- Power Steamer- Pro heat Plus."It was a gift (used) with out a guide.I do not want water on my floors or carpet so I need to do this right.Thank you so much Sandra


Try this\015\012http://www.fixya.com/support/p49884-bissell_7920_proheat_pro_tech_upright/manual-17858 ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0570 seconds