Having problems with your Bissell 8910 ProHeat Clear View Upright Vacuum ?

Bissell 8920 won't release fluids at the rollers

\015 I have a bissell 8920 proheat 2x ( the drop down list would only let me put 8910) steam cleaner. We have had it fo about 9 mos. and suddenly the roller sprayers are not working. There is plenty of fluids comming from the hand tool but nothing from the lower side. I have cleaned the spray heads but still nothing. can you help???\015

Answers :

I have an 8920 ProHeat 2x as well with the same issue - no spray at the rollers. Seeing that the hand tool worked I checked the finger switch for continuity and it was good. Turns out the red spray heads that clip into the unit just under the water tanks were the culprit. I popped those off and ran a paper-clip through them from the front. I must have contaminated the fresh water tank while emptying the grey tank. Works better than ever now, just thought I'd share what my issue turned out to be.
I had the same problem. Mine would work at upholstery cleaner end but wouldn't spray at the rollers. I took lower cover off (under handle) and my switch that controls the high traffic areas was stuck. There are 2 plungers at the bottom of that switch and only the one was working. I moved switch a few times and the one plunger was stuck. I free'd it up by pressing on it a few times under the switch with my fingers and batta bing the POS worked. My unit is only 4 months old and was used twice before acting up..... Bissell can maybe design these with a little more thought behind it :~(
Repair Help & Product Troubleshooting for Bissell 8910 ProHeat Clear View Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bissell 8920 won't release fluids at the rollers


I have an 8920 ProHeat 2x as well with the same issue - no spray at the rollers. Seeing that the hand tool worked I checked the finger switch for continuity and it was good. Turns out the red spray heads that clip into the unit just under the water ... Bissell 8910 ProHeat Clear View Upright Vacuum

My Bissell Pro-Heat 2x 12 amps Model 9200-2 The rollers wont turn and the water wont release


WON'T SPRAY ??? ... Bissell 9200 Upright Vacuum

I have a Bissell Proheat 2x cleaner which has worked perfectly on every occasion. Today I filled the machine as usual with water and formula and switched on, the motor ran, the lights were on and the brushes rotated but upon pressing the spray trigger no water or formula was released. I have cleaned the jets underneath and also followed instructions to release any airlock. It still wont release the water/formula. What else can I do? Thanks Charles


Please check the following with liquid in both tanks.\015\012 \015\012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\015\012- ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

My bissell wont release water or cleaner - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum


Make sure there is liquid in both the Tank-in-Tank and the SmartMix Bottle and check for spray through the upholstery hose. If the hose does not spray please check the following:\012 \012- Remove the belt access door and inspect ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Roller wont turn on my bissell vaccum model 5770


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Bissell powersteamer clearview model 8806-roller brush wont spin


... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

New bex bissel wont release water onto carpet


Hey Margart! I understand how frustrating it is to have no spray when trying to use a machine. We have a terrific list of FAQ's on our website to assist you. Here's a quick link: \012\012 ... Vacuums

My bissell proheat 2x 8920 series will not dispense the cleaning fluid from the little tank. The water sprays out fine and everything else works, it just wont spray out the cleaning solution. Please help!


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I replaced pump and put back together now it wont release any soap// bissell proheat 7901


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Roller brush wont rotate my bissell series 3760-5


... Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

My bissell deep cleaner wont release water and cleaner into the flow indicater


Do you mean the little red spinning thing?try unscrewing the clear cover , lift the red thing out and check for hair etc.then put it back together. worked for me, hope it helps. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I replaced pump and put back together now it wont release any soap// bissell proheat 7901


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I have bissell cleaner 8920 it will not release the cleaning fluid and water


Please check the following with liquid in both tanks.\015\012 \015\012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\015\012- Check ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

MY ROLLER WONT TURN - Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum


Did you check the belt? ... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

Need help My Bissell wont pick up any water and all it does it releases water from it. What should i do?


There is a rubber gasket that sits between the tank lip and the clear nozzle window. Part #2104052, also the the filter on the under side of the lid is clogged.\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\0122104052 ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Scrub roller wont spin - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Pull the bottom cover off and replace the drive belt for the brush drum, if the belt is ok then replace the drive motor for the brushes. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My Bissel proheat carpet cleaner wont spray out of the bottom or the spray handle. I took of the scrub brushes and off and cleaned out the bottom of the machine including popping out the two spray heads to make sure they were not clogged. Put it back together. Still no spray! I also did the turn off, remove fluid containers, replace, turn on for one minute to prime the pump, and still so spray...does this mean my pump is not working?


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Wont release liquid or shampoo.


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=618960&thid=601973\015\012Won’t release liquid or shampoo.\015\012Posted by lilmrsmcd on May 16, 2008\015\012 ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Kenmore progressive direct drive roller wont turn


... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Bissell pro heat steam carpet cleaner, not releasing water.


That means that you need to replace the pump belt. Here is the belt you \012need and a manual you can view:\012\012Bissell 7901 Belt and ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Roller wont spin


The bearings in your brush roll are bad. Replace the roller and walla problem solved! ... Bissell CleanView II Plus Upright Bagless VacuumVacuum

Bissell aroma pro upright carpet cleaner wont push foward keeps getting stuck


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

My bissell proheat 2x wont vacuum up water


There is a float (usually looks like a red ball) that rises up if water is in danger of getting to the motor. Sometimes they stick.. Give it a poke to free it up.\015\012\015\012All the best,\015\012\015\012WD ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Wont release liquid or shampoo.


May be better to just replace it, \015\012\015\012\015\012\015\012\015\012CAP & INSERT ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0478 seconds