Having problems with your Bissell 9200 Upright Vacuum ?

The Hoses are connected wrong - Bissell 9200 Upright Vacuum


Answers :

Repair Help & Product Troubleshooting for Bissell 9200 Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The Hoses are connected wrong - Bissell 9200 Upright Vacuum


... Bissell 9200 Upright Vacuum

Bissell proheat hose connection - Bissell 9200 Upright Vacuum


... Bissell 9200 Upright Vacuum

Bissell 37604 Bagless Upright Vacuum. Hose keeps clogging every time I vacuum. Is there a way to prevent this? I am ready to buy a new vacuum, but it does do a great job picking up hair...until it clogs. It clogs at top of hose. Could the hose be kinked? It does not look like it.


That is a defect in the design of that style of vacuum. I went back to my old vac because I got so tired of having to unstop it. The sharp turns in the hose and the molded plastic causes it. Find one without the turns. ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

My bissell proheat upright steam cleaner is spraying out through the attachments just fine, but will not spray to the floor when using upright. we've taken it apart to find that there is no water at all going through one of the hoses, but it appears the hose is connected behind the on/off and heat switches, we can't seem to figure out how to get in there to replace that hose....any suggestions on how to access this?? just curious how you would get in to replace the hose, we know it is the hose..


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a Model 116.35922500 Kenmore upright vacuum cleaner. It makes a loud air noise when using the vacuum. I have disconnected and removed the hose to see if anything is lodged in the hose and it appears clear. It makes the noise when the hose is connected. When I remove it, the noise stops. When I place my hand over the hose, the nose re appears. I sounds as though the noise is coming from the fan or internal parts of the machine. So, when there is a load or pull on the machine, it mak


... Kenmore Progressive 35922 Bagged Upright Vacuum

Connect or disconnect hose on upright vacuum


The hose has to be connected to engage the suction. To test this, is there suction in the hose when you turn the vacuum on? If so then the hose needs to be connected. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Bissell proheat no hose suction - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Hose routing diagram for Bissell 1694 - Bissell Powersteamer 1694 Upright Vacuum


... Bissell Powersteamer 1694 Upright Vacuum

My dirt devil upright dynamite vacuum does not pick up when i vacuum the carpet but the hose has good suction when I use the tools...what is wrong with it..


That means that your belt is worn, stretched or broken. You need to replace the belt. You can get replacement belts and view the manual:Dirt De ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum

How do you remove debre stuck in hose? - Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum


Hi, If you can remove hose at both ends, push the obstruction through with a garden cane or similar. If you can only remove one end, then unravel a wire coat hanger, make one end look like a corkscrew and twist into the obstruction a small way and pu ... Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum

How to replace hose on bissell cyclone - Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum


... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

No power in vacuum only hose works - Bissell 6594 PowerForce Bagless Upright Vacuum


CHECK FOR A CLOG BEHIND THE BRUSH,OR MAKE SURE YOUR BELT IS NOT BROKEN OR OLD ... Bissell 6594 PowerForce Bagless Upright Vacuum

Bissell 35962 Cleanview Bagless Revolution Upright Vacuum hose is clogged with sock where hose meets handle attachment. Attempted to use broom handle to push back through suction opening. Sock is compacted. Any home repair advice?


If you have access to a small sink "snake" used to clear clogs in sinks, you might be able to use it to "snag" the sock and pull it out.\015\012Needs to be a metal sewer snake so that you can tug on it if and when it snags the sock. ... Bissell 35962 Cleanview Bagless Revolution UprightVacuum

My bissell 3595-2 vacuum cleaner started turning off the power automatically. Now I can not get it to turn on. This vacuum cleaner is still in real good condition, as I have hardly used it. Please advise what could be wrong. I was thinking maybe a loose connection with the on-off switc.


... Bissell Vacuums

Have a hard time connecting the hose - Kirby G4 Bagged Upright Vacuum


Hello, wisI\012 was trying to help you out here. Maybe this will help some? I was going\012 back to some customers that asked questions in the recent past and even\012 farther back. It appeared that no one answered some of them, So, ... Kirby G4 Bagged Upright Vacuum

No suction using extension hose for Bissell Bagless Upright vacuum. i checked for clogs and found nothing. shannon


Check the sole plate where the beater bar is. You may have to remove the roller brush flap to get into the roller brush and then check the main dust channel beside it. Usually if there's no suction on the hose it means that:\015\012\015\0121) T ... Bissell CleanView II Plus Upright Bagless VacuumVacuum

I dont know where to connect the hoses - Kirby G4 Bagged Upright Vacuum


Assuming you dont have the manual, you should try to google " manual for kirby G4" and you should see it there. you also have the option of downloading the manual in PDF format, to be opened with adobe reader, which can be acquired from ... Kirby G4 Bagged Upright Vacuum

Hello :) My bissell proheat upright steam cleaner is not shooting any water out at the bottom and I was wondering what could be wrong. The handheld part is working fine, its only the vacuum part thats not squirting out any water.


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have bissell powerforce upright vacuum for 3 years, it's voice is too loud and noisy not like before, what's wrong with it? is it the motor or what?


More than likley its the motor bearings wearing out and the brush bearings as well by now ... Bissell 6594 PowerForce Bagless Upright Vacuum

Water wont spray from fabrac cleaning hose - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Roller wont turn ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Arrgh! I have an upright Bissell vacuum. Everytime I use it, it smells like a cloud of dust. I have made sure countless times that all the filters are clean and the hoses are intact, so I don't know what the problem is. Is this problem normal? Or am I somehow blowing dust everywhere? Any insight it much appreciated, thanks!!


I believe you have a clogg in the suction pipe. ... Bissell 3590 CleanView Bagless Upright Vacuum

The hose will ****, but not the main unit - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


Empty the dust canister and clean out the bottom filter ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Model#7901-h where do all the hoses go? - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Hose has no suction - Bissell 6590 CleanView Bagless Upright Vacuum


Take your brushroller off like your changing the belt and see if you see anything clogged up behind there if there is then pull the dirt or whatever out ... Bissell 6590 CleanView Bagless Upright Vacuum

Where do you connect the attachment hose? - Kirby Generation 3 Bagged Upright Vacuum


You have to remove the brushroll nozzle and your attachment hose goes in its place set it on the cross rail, rotate up and lock in place. ... Kirby Generation 3 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1147 seconds