Having problems with your Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum ?
Water doesn't always go on floor and won't **** it up at all
\015 Ive replaced this shampooer twice and this second one I've had tons of problems with it won't spit water on the floor then I unclogg it and it works but then it does it again now it won't **** up the water. This shampooer sucks I owned a hoover for 10 years never a problem till the last year the moter blew. I thought this would be a good product. What do I do ? I can't afford a new one.\015
You can take it to a vaccuum repair shop. Check your local yellow pages or go to bissell.com. Go under fequently askes questions. If you don't get help there call the customerservice number or e-mailthem. I hope that your problem gets fixed.
Repair Help & Product Troubleshooting for Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Water wont spray when its in the floor cleaning position
Hi Patti, here's a quick link to troubleshooting steps to assist you with the spray.http://www.bissell.com/FAQDetail.aspx?id=1123&cid=ccsocial ... Bissell Brushroll Proheat 2X 8920 9200 9400
My Bissell proheat 2x model 9200 is not dispensing cleaning solution. I hold the trigger and the carpet doesnt get wet at all. i poured water on the carpet and it sucks it up. the cleaning solution does mix with the water but it not being dispensed on the floor.
Hi, \015\012when last did you service the machine?\015\012\015\012i believe should service the machine.\015\012try to open the machine.\015\012\015\012when opening make sure you notice where the part you are remov ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
Water doesn't always go on floor and won't **** it up at all
You can take it to a vaccuum repair shop. Check your local yellow pages or go to bissell.com. Go under fequently askes questions. If you don't get help there call the customerservice number or e-mailthem. I hope that your problem gets fixed. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
My Bissell 9200 wont always pump water to the tools
... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
My proaction steam cleaner has stopped working. the green light is always lit in amber and the water doesnt heat up nor does it eject steam.
Water wont come out when handle pressed to do floor or out of nozzle for upholstery cleaning smells hot when trying to get it to work could this be a belt
Yes it most likely is the belt ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
Water wont spray when triggered in floor cleaning mode.
Check for clogged nozzles. Red under water holder. ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
I pumped my steam mop to get started as I always do. I heard a loud pop and now it won't produce steam and leaks water on the floor.
I was mopping with mine a couple months ago when it stopped producing steam. I pumped it several times resulting in a really loud pop (sounded like a .22 going off) followed by a large release of steam from the housing followed by water trailing on ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
All the water in the tank comes out on the floor at once and wont **** up
See the diagram attached and proceed according. God bless you ... Bissell Vacuums
Why wont the brushes spin? I have had this machine for about 3 years and it has always worked great, tonight the brushes will not spin at all, it still sprays and sucks up the water. We took the brushes off and were able to spin them by hand
In this machine there is no belt. The brushes actually spin by vacuum and in the turbine assembly there is a small wheel bearign which rusts out. You will need to remove and repair or replace the turbine and gear assembly P/N should be 43191009 ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Bissel proheat2x 9200 wont emit water both on the floor and handle
... Bissell 2X Proheat 9200 rug cleaner
Wont pick up water or solutuon from floor - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem. ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
The spinner that shows that the suction or water is pumping out on the floor will not spin. I have checked the belts they are ok. I have turned it off for a few min. and it doesnt work.
The belts may look fine but they can be stretched or worn. If you haven't replaced them recently I would try that. You can get the belt you need here: ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
The water doesn't always come out when using the floor and the hand-held wand..
Here is what someone said from "howtomendit.com":\015\012\015\012You must make sure that there is some kind of liquid in the dispenser bottle at all times. This doesn't have to be soap. You can fill it with water, Also you must insure tha ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
Wont spray water on the carpet
I had to remove the line from the pump that goes to the 2 spray heads. Sucked on it and got it cleard out. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
Hoover SteamVac Plus 1200 upright hot water extractor Water/carpet cleaner applying o.k. Suction on the "floor" does not work. Suction on the hand tool works somewhat, but water is not collecting in the bucket. There is suction coming from the floor but water is not going into the bucket. It does not appear to be clogged because I can feel with my hand that air is flowing from the floor. The water is not being sucked into the bucket.
... Hoover Vacuums
My sunbeam water cooler model #YLR2-5-67H3 has been sitting unplugged for 3 years. I moved, plugged it in and put a water bottle on top and water went all over the floor. I unplugged it, (read the instructions on the front, duh) and it still leaks on the floor. What should I do? I put it over the sink, emptied it, checked the drain plug, tried running a glass full of tap water through each tap. Only the room temperature one would work.
One of the rubber connecting hoses inside it has dried and aged so the pressure of the water from the bottle made it burst.\012\012\012You will need to open it, find the defective hose and replace it - a 2 hour relatively easy job. The hardest ... Sunbeam Vacuums
Pickup water wont pickup the water after putting it down very little comes up into the tank .it worked fine when we baught it but after not useing it for some time it worked now it wont **** water up at all can anybody help.
The clear shroud covering the front of "hood" has two sheet metal type screws at the bottom in front of the brushes, these two screws also hold the little straight brushes ( one on each side) in place. I found one of these screws had broken it's plas ... Hoover F6020-900 SteamVac Upright Vacuum
I have a george wet and dry (A26A), it wont pick up any water. the tube which goes from th lid into the water wont pick up water?
Bissell proheat2x 8920 wont spray water
Hey Patti, spray is important when you want to clean. Here's a link to toroubleshooting steps to assist you.http://www.bissell.com/FAQDetail.aspx?id=1122 ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
I have a hoover steamvac delux with 5 brush agitor..puts water on floor, but will not suction up. also leaks water on floor under cleaner when upright. why?
... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum
My machine wont pick up the dirty water. If I take the cover off the recovery tank there is a lot of suction but it wont **** up the water. my carpet is soaked. What can I do
At power head clean out area before power head also look for small hose and clean out and look at rollers,i hope this works if you have directions still they should be able to help you out some more.thanks ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Lost manual last time i used the upholstery tool and i think i forgot to put a part back on...from the floor head to the recovery tank the water comes up but i have a gap there...the water won't suck up off the floor...
Send your email address to [email protected] I found the pdf manual file for this unitl ... Hoover F5906-900 Upright Steam Vacuum
Hello good afternoon, i have a Royal Sovereign water dispenser with a little fridge on the bottom part and the problem i am having is that the dispenser wont release cold water and the fridge wont cool either. i would like to know is there any thing i can buy to fix it or do i have to buy a brand new dispenser! Thank you for your time!!
Kenmore canister model 116.25513506 wont turn on. when handle switch is turned to floor. vac motor does not turn on. When switch is turned to carpet, floor nozzle works but vac motor does not. I checked fuse, all o.k. checked continuity for plug, o.k. removed wires for bag full switch...motor wont run. I wired motor directly power cord...motor runs. Thinking it must be the circuit board, how do I bypass it or test it?