Having problems with your Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum ?

Bissell Proheat Clearview 1669

\015 I need to get to the heater in the handle since everything has been checked and I still do not get any fluids to come out. They do come out through the accessory hose. I read that since everything has been checked and cleaned (filters, etc.) that I need to clean debris from heater but I can't seem to get to the heater. I removed all the screws in the handled but still was unable to see heater. can you help?\015\012\015\012Thanks so much!!!\015\012\015\012Linda\015\012\015\012The problem with the machine is that I get no water or solution out of the bottom nozzles. The hand-held portion works fine, but no spray from the bottom. I've checked the hose lines, made sure that the nozzles were clear of debris, and still nothing. Everything else works fine and it seems like everything is seated properly (if I dry out the connections for the solution tank and the water tank and seat them, they're wet when I pull them up and water is in the line). Any suggestions?Thanks!Chris\015

Answers :

Take out the 2 long screws with the nuts on them, then furher down just beneath the hose wrap asm, there are 2 more screws to remove. Put the top part of the handle off, lay the handle down, on the front, at the top and in the center is a tab, push it in and pull the top half of the handle away from the bottom half. Then you will see the heater, don't mix up the hoses after you are done.
Repair Help & Product Troubleshooting for Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to use bissell proheat clearview plus - Bissell 7901-R Clearview Proheat Plus Upright Vacuum


BISSELL User's Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User's Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell 7901-R Clearview Proheat Plus Upright Vacuum

How to use bissell proheat clearview 12 amps rug


Here is a user guide, and it will show you how to use it. just click and read. its a PDF file. you might need adobe to look at it. It is a free download.\015\012\015\012 ... Bissell Vacuums

Bissell Proheat Clearview 8905 pump replacement


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My Bissell has NO suction! - Bissell 7901-R Clearview Proheat Plus Upright Vacuum


... Bissell 7901-R Clearview Proheat Plus Upright Vacuum

Why do we not get any water to come out of bissell proheat clearview model 1699? thank you Bissell 1699 Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My Bissell Proheat Clearview is not spraying water nor taking


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Won't dispense water/cleaning solution (bissell proheat clearview) the water reservoir is full as well as the soap. The engine is turning on and the light indicating heat is on is functioning. Any suggestions?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell Proheat Clearview Force carpet cleaner keeps leaking water from both tanks. What can I do to fix it?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum

How to replace belt on a bissell proheat clearview plus carpet cleaner


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 7901-R Clearview Proheat Plus Upright Vacuum

Bissell proheat clearview plus rug cleaner


Is it a flat or a geared belt? Once you have answered this question call 1-800-948-1358 and ask for Josh or Buck. Mon.-Fri. 9am-6pm est Sat.9am-2pmest ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Water suction My Bissell Proheat Clearview is not sucking up water into the tank, motor appears to be fine


Here's what I did. On the top of the water bucket there is a red oval screen, remove and clean the screen and replace. Also, next to the screen is an oval opening which meets up with a black oval gasket on main unit. Inspect the gasket and replace if ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

Bissell Proheat Clearview - Belt and pump keep melting


Is the brush roll turning freely? Is there something binding the pump pulley or belt casuing it to not turn? Was the replacement pump a new one? If you replace these parts again, after doing so, try turning the pump pulley by hand to see if it wil ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Why wont my bissell proheat clearview dispense soap?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I recently purchased the Bissell Proheat Clearview from a flea market. Used once for a demo. I tried to use it yesterday, and while the handheld upholstery attachments work like a charm, the scrubber itself does not release any water when the trigger is pulled. Any suggestions?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum

How do i put new belt on - Bissell 7901-R Clearview Proheat Plus Upright Vacuum


How do I change on my Bissell Proheat Clearview Model # 1699-W ... Bissell 7901-R Clearview Proheat Plus Upright Vacuum

I have a bissell proheat clearview plus steamcleaner. i was using it and then the little red flow indicator stopped spinning and it quit sprayng any liquid. i looked for where it could be clogged but i dont see anything


Does water squirt out of the hose nozzle, if it does, then check the heater inside the handle asm. Make sure that where the tubes hook up to it are not clogged. If water doesn't squirt, check for the seal at the bottom of the tank, it needs to be o ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell 1699 ProHeat Clearview Steam Cleaner won't pick up


Usually if the water isn't being sucked up is either the filter in the lid of the tank is clogged, or the gasket that sits on top of the clear window nozzle and the tank is missing. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I lost my instruction manuel bor the Bissell Proheat Clearview upright cleaner. What type of rug cleaner do I need to purchase and how do I insert the bottle of cleaner? Thanks


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699N ProHeat Clear View Force Upright Vacuum

Bissell Proheat Clearview 1669


Take out the 2 long screws with the nuts on them, then furher down just beneath the hose wrap asm, there are 2 more screws to remove. Put the top part of the handle off, lay the handle down, on the front, at the top and in the center is a tab, push ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell Proheat Clearview water problem


The water comes out the hose at the same time. The diverter only diverts the suction from floor to attachment. If it is constantly spraying there is a problem with the attachment. Is it not spraying on the floor? ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell ProHeat Clearview Steam Cleaner - need steps to clean the clear input area. I have removed the four screws and need to know how to finish the removal of the clear plastic input area.


For the clear outer nozzle, there are 2 screws holding it in place. Remove those, then from the bottom lift it up. Sometimes the seal holds it really tight and you may have to carefully pry on the sides until it loosens up. Then when you put it ba ... Bissell Vacuums

Bissell Proheat Clearview 1669


Take off the 2 long screws and remove the top part of the handle. Then from the back, just undr the hose and cord wrap asm, there are 2 screws set deep in the holes to remove. Don't remove the cord and hose wrap. Then lay the handle back, at the t ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell ProHeat Clearview 1699 roller replacement


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

A friend used my Bissell Proheat Clearview shampooer, and didn't wash out the shamppoo bottle nor turn the dial to water only after using. The flow assembly on the bottle was destroyed. I bought a new bottle but still can't get the shampoo to flow. Hope you can help.


Pls model no ... Bissell Vacuums

How do you change to belt on the Bissell Proheat Clearview?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0323 seconds