Having problems with your Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum ?

Proheat clear view

\015 I cleaned my carpets last week and proheat worked fine - today it is not "putting out" cleaner and very little water. what should I do?\015

Answers :

Check to see if the spray tips are clogged with soap. when you remove the water tank you will find them located on each corner in the front of your steamer. they are usually red in color. pull both side tabs together then lift out. remove clamp then carefully pull the hose off. i have had the hose rip on me before so do use caution. you should see the clog if there is one and should come out in hot tap water. there are several things that could cause this problem but this is the most likely. good luck!!!
Repair Help & Product Troubleshooting for Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bissell 1699 ProHeat Clear View uses very little soap.


Puts water out but bottom brush doesnt move ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell 1699n proheat clear view problems


Does water squirt out of the hose nozzle, if it does, then check the heater inside the handle asm. Make sure that where the tubes hook up to it are not clogged. If water doesn't squirt, check for the seal at the bottom of the tank, it needs to be o ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell Proheat user manual - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Internal diagram of bissell proheat - Bissell 8910 ProHeat Clear View Upright Vacuum


... Bissell 8910 ProHeat Clear View Upright Vacuum

My bissell proheat will not release water - Bissell 8910 ProHeat Clear View Upright Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum

My proheat 2 will not spray - Bissell 8910 ProHeat Clear View Upright Vacuum


I just disassembled my Proheat unit and found that there was calcium buildup in the lines. I had to remember how the hoses went when I reassembled it. If you are not comfortable doing this, I suggest you take it to a repair shop. It is worth checking ... Bissell 8910 ProHeat Clear View Upright Vacuum

Loss of suction on a bissell proheat pet - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell proheat not dispensing water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,As the weather is getting warmer for many people their freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong. If you are hearing a clicking or buzzing ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How to install float on bissell proheat - Bissell 8910 ProHeat Clear View Upright Vacuum


... Bissell 8910 ProHeat Clear View Upright Vacuum

Bissell proheat protech 7901 manual - Bissell 8910 ProHeat Clear View Upright Vacuum


Here is a link to the instruction manual for your 7901 Bissell.\015\012http://www.bissell.com/images/UserGuides/7920.pdf ... Bissell 8910 ProHeat Clear View Upright Vacuum

What size belt for a bissel proheat - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Proheat clear view


Check to see if the spray tips are clogged with soap. when you remove the water tank you will find them located on each corner in the front of your steamer. they are usually red in color. pull both side tabs together then lift out. remove clamp then ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Our bissell will not dispense water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Scrub roller wont spin - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Pull the bottom cover off and replace the drive belt for the brush drum, if the belt is ok then replace the drive motor for the brushes. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How do I work this dam thing????? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


How do I work this?\015\012Bissell 1699 ProHeat Clear View Upright Steamer\015\012How do I work this dam thing?????\015\012 \015\012I would advise you to ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My bissell want **** up the water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Make sure that where the tank lid lip and the top of the clear noozle has that black oblong gasket on it. Also make sure the filter on the tank lid is clean. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Don't have a inkling how to take it apart - Bissell 8910 ProHeat Clear View Upright Vacuum


If you email me at [email protected] I can send you some photos and the procedure to take it apart. I have one on the bench right now. ... Bissell 8910 ProHeat Clear View Upright Vacuum

Brush won't rotate so machine will not clean - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Your belt is probably stretched or broken. You can get this belt here:http://vacbelts.xps.convina.com/bissell-proheat-belt-combo-pack. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

No soap mixture is coming out - Bissell 8910 ProHeat Clear View Upright Vacuum


Is the smart mix valve turning easily? If so then the cap and valve at the bottom of the soap bottle may be bad. Is the seal on the valve onm the bottle, needs to be on the bottle and not sitting in the hole where the bottle sits in. ... Bissell 8910 ProHeat Clear View Upright Vacuum

Replace belt - Bissell 8910 ProHeat Clear View Upright Vacuum


You can get this replacement belt at www.vacbelts.com. ... Bissell 8910 ProHeat Clear View Upright Vacuum

Wont **** up the water. I also need a manual - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here is the manual that the Service Centers use to repair and take apart your system.www.thinkvacuums.com/pdf/uprights/Bissell_Powersteamer_Repair_Guide.pdf ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How do I know the rinse feature is working? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


You won't see any saop suds being sucked up, just clear water. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Lost manual dont know were water goes - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here you gohttp://www.bissell.com/images/UserGuides/7901_1008.pdf ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

It wont **** up the water anymore. why not? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Try this it might help on the lid of the water bucket you will find a red filter if this is dirty give it a wash and see if that helps, also make sure the black seal is in place on the top of the window where the water bucket overlaps, also if the cl ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Model 1699 bissell proheat clear view with heater


Hope this picture will help:\015\012\015\012 ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0302 seconds