Having problems with your Bissell Big Green ?
flow indicator on the Bissell Big Green not spinning
How can I replace the flow indicator if needed. It is spinning hardly at all.
Repair Help & Product Troubleshooting for Bissell Big Green
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Bissell Pro-Heat 7901-1 no cleaning solution is pumped out. The flow indicator is spinning and the belt is spinning the beater bar. Have cleaned the flow indicator, checked vavles in the solution tank and water tank and they are working properly. Also checked the trigger to make sure it works okay. Any ideas?? Moody Fan
Bissell Pro Heat shampooer - Fill the soap dispenser with extremely hot water and shampoo with only water for a few minutes. There is often dried soap in the lines. Make sure that all filters are clean. Press the soap container and the water conta ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
Bissell Pro Heat 7901 will spay through hose but not the floor and red flow indicator will not spin. So we took the housing off and after unclogging a hose running to the hearter, my husband unhooked the hose that goes to the flow indicator, blew in it and it started spinning. Put the deep cleaner back together, tried to use it and nothing. What else can we try? Can't afford to put it in the shop right now. Thanks in advance.
I borrowed my friends bissell to clean my carpet. It's the 7901. He brought it over and told me that it only sprayed out of the attachment hose. He said he couldn't figure out what was wrong. I'm no vacuum technician but, I am a mechnic. I decided to ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
Flow Indicator is not spinning
... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum
Bissell pro heat flow indicator wont spin
Hey Traci! You may want to have one of BISSELL's Authorized Service Centers inspect your machine. Here's a quick link to assist you in locating one in your area:\012\012 ... Bissell Vacuums
I have a Bissell 7920 ProHeat and only used it 4 times and the brush on the bottom has stopped spinning and when attempting to spray solution the flow indicator doesn't spin and nothing comes out. I have looked at all of the belts and they seem fine. I have also removed and cleaned the heating unit. Still nothing. Any other ideas?
Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum
Hoover Elite Deluxe rewind... Air flow indicator stays activated, after filter has been cleaned. Brushes spin, but very little suction. Dirt is not spinning in cup
... Hoover Vacuums
Air flow indicator stays activated after filter has been cleaned. Brush spins, but very little suction. Dirt doesn't spin in cup.
Your vacuum is clogged. Check all of the air pathways, hoses, etc. The most common places to check are anywhere there's a joint in the airways, and also directly behind the brushroll. \015\012\015\012-R ... Hoover U5507900 Elite Rewind Bagless Upright Vacuum
Flow indicator stopped spinning but there is water and soap
... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
Sometimes the flow indicator doesn't spin even tho it has solution. I've tried loosening & tightening the lid. what else can I try?8910 Bissell proheat
\015\012\015\012\011\011\011\011\011\015\012\015\012\011\011\011\011\011\011\015\012xpinto ... Bissell 8910 ProHeat Clear View Upright Vacuum
Water will not pump out of my bissel carpet shampooer the motor works ok but the flow indicator is not spinning and no water comes out of machine so carpet is dry
I wasted a lot of time following the expert advice to repair my unit by taking the cover off of the main unit and using compressed air to blow out the lines. The problem turned out to be in the lower panel of the handle (4 screws to remove). The he ... Bissell 8910 ProHeat Clear View Upright Vacuum
My Bissel Proheat smartmix bottle is emptying really fast and it doesn't seem like the carpet is even getting wet. I am just trying to do a rug in the kitchen and have filled the smartmix bottle 3x now and the rug is barely wet yet. I have cleaned out the flow indicator filter and it does not spin when I push the button like it used to. I have also checked the belt and it seems fine. It is actually a Bissel Proheat 7901/8910 (Pet) but they could not find my product. Any suggestions, I am
... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum
Flow indicator does not spin when the trigger is depressed like nothing is coming through, pump?
Usually that is showing no soap in soap tank even if there is water in the water tank.After filling soap tank make sure it locks in real good ;Thats been my problem a few times.I didnt know the water and soap were in seperate tanks the first 2 times ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
Flow indicator on my bissell model 16981 is not spinning
... Bissell 1698-1 PowerSteamer ProHeat Plus Upright Vacuum
Hi. Would you know why the flow indicator on my Bissell Proheat won't spin.
Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
I have a bissell proheat clearview plus steamcleaner. i was using it and then the little red flow indicator stopped spinning and it quit sprayng any liquid. i looked for where it could be clogged but i dont see anything
Does water squirt out of the hose nozzle, if it does, then check the heater inside the handle asm. Make sure that where the tubes hook up to it are not clogged. If water doesn't squirt, check for the seal at the bottom of the tank, it needs to be o ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
Flow indicator not spinning - Bissell 1697-7 Powersteamer Pro Deluxe Vacuum
If you took it out you might not have put it in right the small round white piece with the little thing sticking out of it needs to facing up and the red thing that spins sits on top of the white pin, if it is in right then Replace your b ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum
Using Bissell Proheat Model 7950 No spray when using "floor cleaning" and "flow indicator" doesn't spin
... Bissell Vacuums
Spin brushes spin freely on steam vac when not attached to cleaner indicator screen not dirty speed selector is in high position brushes are clean spin brush indicator when brushes attached to machine does not rotate
If this is a Hoover Steam vac, the turbine which drives the brushes is bad. If not a Hoover, then what is it, they are different, need brand and model number. ... Vacuums
Flow indicator not spining
Yes I also had this problem after just one use. There's several things that you should check. 1. pull side panel off where the belt is located and see if the liquid in the clear tubbing is flowing.I there is a bubble in the line the pump has lost it' ... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum
Have a spin scrub a couple of years old. Have used it maybe 5-6 times and the green brushes only spin if you take the tanks off and set the machine upside down and push the brushes toward the machine... the second you stand the machine up they quit spinning.
Repace the belt ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
How do I put the belt on the Kirby the correct way in order for the green light to come on? The green light indicates that the Kirby will pick up.
The G4 has a magnetic block on one end of the brush. It must be aligned on the LED end of the brush housing. ..with adjustment screws facing out. When setting the housing back in place use the pedal to lift the carpet nozzle up off the work surface ... Kirby G4 Bagged Upright Vacuum
Brush spin indicator does not spin when turned on. model F5915-900
... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
The sabre elsa EN1146 has a gauge indicator which shows the air bottle pressure,it has three sectors ,green -orange & red. when the gauge indicator is in orange sector what does that stand for?
Performance indicator I have a canister vacuum. I cleaned the filter and now the performance indicator is red, is it supposed to be red or green?
Put tape over it so u cannot see it ... Vacuums
The belt burnt out and it seems as though the red arrown does not release the belt. Like it is backwards from the green arrow. It had a burning smell and the belt broke. Then the second belt started to burn out when the brush roller wasn't spinning. Not sure what might be wrong. Green light will not come on either.
It sounds as if there may be a piece of the broken belt in there. Look carefully with a flash light and remove any remnants you find, using a pair of pliers if you have to.\015\012\015\012Also, remove the entire brush roller assembly and ... Kirby Ultimate G Bagged Upright Vacuum