Having problems with your Bissell CleanView Helix 22C1 Bagged Upright Vacuum ?

The turbobrush for my cleanview helix 22c1 is not working


Answers :

It's probably either just dirty, or the belt is broken. If it's dirty, you can just take the cover off (two Phillips head screws on the bottom) and clean everything off the brush.
\012
\012If the belt is broken, you can tell by turning the large gear at the back of the brush -- if the brush turns when you spin the gear, the belt isn't broken -- then you'll need to replace it. You can buy a new belt online, or you can buy a replacement Turbo Brush directly from Bissell ($24.99).
\012
\012Hope that helps!
Repair Help & Product Troubleshooting for Bissell CleanView Helix 22C1 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The turbobrush for my cleanview helix 22c1 is not working


It's probably either just dirty, or the belt is broken. If it's dirty, you can just take the cover off (two Phillips head screws on the bottom) and clean everything off the brush.\012\012If the belt is broken, you can tell by turning the ... Bissell CleanView Helix 22C1 Bagged Upright Vacuum

The brush on my bissell helix (model 22C1-2) stopped working all of a sudden today. The hose still sucks and everything. I even cleaned the spinning brush and it still doesnt work. I just bought it in August.


... Vacuums

Bissell 82H1 vacuum brush won't work - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Need manual for cleanview helix - Bissell Cleanview Helix Vacuum


... Bissell Cleanview Helix Vacuum

I just purchased this product and used the Turbobrush on 1 chair and it stopped working already. I have gone through my instructions very closely and I cannot figure out why it now will not work. Help!


It seems to be time to take the machine back to where it was purchased for warranty repair or replacement. Good luck! ... Bissell 1425 Little Green ProHeat Handheld Steam Vacuum

New Bissell Cleanview Helix is aking a high


It most likely is a worn drive belt. Here is a link to the belt you need and the manual:Bissell Cleanview Helix Belt and Manual ... Vacuums

I have a Bissel Cleanview Helix, model #82H1. The


... Bissell 35755 CleanView Bagless Upright Vacuum

Turbo brush on bissell cleanview helix stopped spinning


... Bissell Cleanview Helix Deluxe Bagless Upright Vacuum Cleaner 21K3

Bissell owners manual - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


Click on this link to download your manualhttp://uk.bissell.com/Page_id/117/User_Guides.aspx?Criteria=82h1 ... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Bissell cleanview helix makes loud noise when the roller is engaged. The motor runs quiet when the belt is disconnected. Do i need a new brush roller? I already replace the belt


... Bissell 21K3 CleanView Helix Bagless Upright Vacuum

Bissell 82H1 vacuum brush won't turn - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Bissel cleanview helix won't turn on


... Bissell Cleanview Helix Vacuum

How do I take apart my Bissell Cleanview Helix to replace the power cord?


... Bissell Cleanview Helix Vacuum

Bissell 82H1 Brush won't turn - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

My bissell helix cleanview vacuums brush doesn't spin


Sounds like the beater brush is frozen and won't turn. Remove the beater brush and clean off all debris, especially at both ends. You will find a square(?) piece at each end of the beater brush that holds it in place. This need to turn freely. ... Bissell Cleanview Helix Deluxe Bagless Upright Vacuum Cleaner 21K3

My bissell cleanview is blowing not sucking in the base. the hose works fine and the bruch appears to be rotating fine.


Try reversing your hoses.\015\012Hope this helped.Let me know by rating meFor more help go to live chat.lenwest ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Model 1699-1 ProHeat Clearview Plus -water and cleaner do not dispense when using trigger on handle. The turbobrush hand tool works fine.


When it doesn't dispense water an cleaner like that it means that the pump belt needs to be replaced. Here is a link to the belt you nee and the manual: ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Cant find fuse in Bissell 82H1 series - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Our Bissell Cleanview II 3576M does a great job except that the filter cup below the dirt cup gets full very fast and the dirt cup barely has anything in it. To clean the whole house, I have to empty the dirt cup and clean the filter several times. It didn't use to work this way. It seems like something is missing, a gasket or seal maybe? I don't think dirt, hair and debris should be going straight to the lower cup and bypassing the upper. I looked at the user guide but can't see why it's happen


Contact Bissell Direct for a parts diagram and support at \015\012\015\012http://uk.bissell.com/EmailUs.aspx\015\012 ... Bissell 3576 CleanView II Bagless Upright Vacuum

My bissell cleanview helix wont **** up anything on carpet. the brush doesn't spin. any thoughts?


... Bissell Cleanview Helix Deluxe Bagless Upright Vacuum Cleaner 21K3

Vacuum has no suction and is making a noise - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Have model 3576-6 Bissell Cleanview II and drive belt keeps slipping off peg that is sticking out from motor pulley causing vacuum to stop working properly and brush to stop moving properly


... Vacuums

I bought a ceiling fan from lowe's, got it home got ceiling fan up in the bathroom, when we put in the light one of the halogen bulbs does not work , also two of the cobalt blue glass covers are cracked all the way through and one of the halogen light protectors also had a whole in the end of it. I called Lowe's they told me to contact you; day of purchase was 3/1/08 in Florence Al. store code # 04810-30108. Ceiling fan bar code 0 2403478512 2. 228365 52" Helix Chrome and Cobolt ceiling fa


If this is a new product and it is defective, take it back to Lowe's and insist on a replacement, talk to the manager if you have to. This site will only advise you on how to fix it. ... Vacuums

Need to replace release lever - Bissell 82H1 Cleanview Helix Bagless Upright Vacuum


Hi Rita! You may want to have one of BISSELL Authorized Service Centers to assist you with replacing the release lever.Here's a link to assist you in locating one in your area: ... Bissell 82H1 Cleanview Helix Bagless Upright Vacuum

Miele power head not working - Miele 06271980 STB 205-3 Turbobrush


... Miele 06271980 STB 205-3 Turbobrush
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0388 seconds