Having problems with your Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue ?

Vaccuum Won't Stay On

\015 When I press the start button the vacuum used to stay on, however now I have to hold the start button down. Does anybody have a solution to this?\015

Answers :

Two ways to go about this:

Easy Way
1) Go to Bissell.com and order the replacement handle for about $25 bucks. Follow installation instructions and viola! You're up and running again.

More Complicated (you're on your own)
2) I'm no expect by any measure. I just tinkered around and here is what I got.
  • Remove the handle (If you remember when you purchased the vacuum, you had to install the upper handle by connecting it midway and tightening it with a Philips screw).
  • \015\012
  • I shouldn't have to say disconnect the power, but yeah, that's probably a good idea too.
  • \015\012
  • Remove all screws in the handle. Keep note of which screws came from what area, mine were different sizes.
  • \015\012
  • Split the casing open and remove the red plastic cover. You will find a small switch underneath
  • \015\012
  • I just fiddled around with the small switch until it worked again; you can also go online and buy a new switch Click here for the switch only
  • \015\012
  • Once you have the switch working, or purchased and installed a new one, put the handle back together and install again to the vacuum. You may want to test the switch before completely installing the handle. You can do this by connecting it without tightening the Philips screw in the middle.
Hope that helps a little. I know my wife was disappointed until I got ours up and running again.


Repair Help & Product Troubleshooting for Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson vacuum I have a DC07 vaccuum. The problem I am having is that the front does not want to stay down as I vaccuum and I continuously have to keep stepping on the front to make it go back down to the floor. It seems as though there is either not enough weight in the front or possibly the unit just has to be broken in so that there is not so much resistance between the handle and the front of the vaccuum. Could there be something I did not remove or is this typical on these vaccuums?

There is some thing broken it is two plastic cogs they help the front go down and stay up you will have to get a star screw driver and there should be two screws on top and two at the b ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My bissell brush band has come off and wont stay on thus the brush will not turn, there is also a black arm type thing on a spring inside (on both sides) on the pump belt side it has broken - the side where the brush belt is, help im searching for parts and a way to fix it but im getting no joy, incidentley the brush belt thickness looks way to thick for the small thickness for the brush belt cog (?) to stay on........am i missing something? so i need to get the arm thing replaced plus find a

... Bissell ProHeat Deep Cleaner Upright Vacuum

I have a brand new LGV200R vacuum sweeper.. from the very beginning it never will stay turned on.. it is brand new.. I have checked every thing in the book that says to and then some.. why wont it stay ON

... LG Vacuums

Bag full light stays on so my electrolux diplomat lx vacuum wont start i push on/off swtch and light stays on

... Electrolux Lux 5500 Canister Vacuum

On button won't stay depressed. when pushed to on, the vaccuum goes on but won't stay on unless button is held down.

Needs a new on/off switch. You can order one from an appliance parts store, and replace it yourself or take it to a shop.\015\012\015\012Charlie ... Dyson DC07 Bagless Upright Cyclonic Vacuum


We have only had our Navigator for 6 months and the bar won't turn. We took the whole beater bar head apart and it was a wiring problem in the beater bar motor.What a piece of junk this is, very poorly made and has many design flaws.Look ... Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum

Power button wont stay on. have to hold the power button manually for it to stay on.

Most likely you have to replace ON/OFF switch. look at detail instructions how to do it on our website:http://www.goodvac.com/kb_results.asp?ID=18 ... Kirby Ultimate G Bagged Upright Vacuum

There is an "exhaust" pipe of sorts in the lower back part of the vaccuum. Most of the dust and specially pet hair just flies out of there and up in the air. It looks like more stuff comes out than stays in the vaccuum. I'm wondering if there should be something connected to that pipe? Vacuum assembled as per instructions out of the box (installing handle).

Something is wrong ... there should not be any dirt coming out as you describe ...\015\012\015\012I'm sorry, based on what you have told me ... I can't go further ... you know ... stuff link make and model.\015\012\015\012Than ... Vacuums

Miele power plus brush model seb234/236 won't work and telescoping wand wont stay xtended

... Vacuums

Wont come on or stay on

Take a look at my troubleshooting guide....\015\012\015\012http://reviews.ebay.com/COMMON-P ... Kirby Ultimate G Bagged Upright Vacuum

My dyson vaccumm wont stay on it works but i have

Is it a switch or a push button? ... Dyson DC07 Bagless Upright Cyclonic Vacuum


Have a look at the filters first as it sounds like you blokeage ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Electrolux z4494 vacuum cleaner mains cable wont stay out

Opened up case as follows:\015\012- Open lid of bag chamber. Remove lid by gentry prising the hinge arms slightly further apart so the hing unclips from the body.\015\0122 deeply recessed screws now accessible at rear edge of bag chamber ... Electrolux Vacuums

Start button wont stay on. Is there a trick to

Have a look at:\015\012\015\012http://www.dysonmedic.com/DC07%20Folder/DC07%20Motor%20change.html\015\012\015\012 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson wont stay on

You have a defective switch, they are fairly easy to replace but i would call and sheck you probably still have it under warranty and can get it done for free\015\012\015\012Hope this helps ... Vacuums

Why wont hepa filter stay in the hoover vcuum cleaner

... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

Henry hoover, head wont stay flat

... Numatic Henry Bagged Canister Vacuum

Filter b in dyson ball wont stay in

Hi Boo,I am sorry to hear you are having difficulty with your post motor filter. Based on the details you provided, we would appreciate the opportunity to trouble shoot with you over the phone. Your post motor filter may need to be replaced. ... Dyson Ball DC24 Bagless Upright Vacuum

My kenmore progressive canister vacuum powerhead wont stay on

... Kenmore 25512/ 25513 Progressive Canister Vacuum

Vaccuum Won't Stay On

Two ways to go about this:Easy Way1) Go to Bissell.com and order the replacement handle for about $25 bucks. Follow ... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

Wont stay powered on

He is right - some parts for these are near impossible to find..\015\012\015\012Did he mention what parts are not obtainable ?\015\012\015\012This is a decent site that has allot of parts available -- ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Dyson Animal on button wont stay on.

That's the problem with dyson. They work for the first few months then start to break down. Your switch might need replacing or your cord connection is lose and causing it to short out and turn off. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The dirt stays in bottom hose. i took the big top hose and checked for blockage...but wont suction to canister

Did you drop something down the hose to see if it would come out the other end? The dirt inlet down by the brush roll may have a clog in it. From what you say, there has to be a clog. ... Vacuums

My son dropped the Hoover Floormate hard floor cleaner and a black piece with a spring came out. I dont know where it goes, and now the handle wont stay up.

I agree that it is the wheel assembly that's broken. However, my wheel assembly broke in a different place, so I bought a replacement part for $20 or so. I have never figured out how to swap it out...\015\012 \ ... Hoover Floormate H3000 Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0231 seconds