Having problems with your Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum ?
Handle release catch out of place.
\015 I assume the piece in my vacuum cleaner is the catch for the handle release because my vacuum will not stay upright. Does anyone know where it is goes? Or is there a internal diagram to be found?\015
I just took mine apart, and there is rounded grooves on both sides of the base for the upright section to rest in. When I put it back together, it naturally pulled out of those grooves and laid back flat. I had to hold it in the grooves while reattaching the screws. The piece that comes off and allows the upright enough movement to come out of the grooves is on the top of the base in the back middle. There is one screw on the front of it, and then 4 screws in the back of it. If your upright section appears to be not in the grooves, remove those five screws, place it in the grooves (it'll have to be slightly elevated---can't lay it all the way flat or it'll come out) and reattach the screws.
Repair Help & Product Troubleshooting for Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Handle release catch out of place.
I just took mine apart, and there is rounded grooves on both sides of the base for the upright section to rest in. When I put it back together, it naturally pulled out of those grooves and laid back flat. I had to hold it in the grooves while reatt ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum
Handle release how do I fix the handle release? It is not in the correct position. It has come out of the unit part way and will not latch the handle in place.
... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
The wand release button has broken. Therefore, the wand does not lock into place which results in swivelling of the handle and sometimes the handle coming off while using the vacuum cleaner. Can this wand release be readily repaired?
... Euro-Pro NV31 Infinity Vacuum
How do I replace the wand handle release catch spring.
... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
DC25 telescoping handle does not seat tightly. When pulling the vac back it unseats about 2 inches. This prevents the hose from engaging securely in the base and suction is affected. Do I need to replace the clear wand release catch? I've only had the vac about a year and am surprised it would wear out so quickly.
... Dyson DC25 Vacuum
On the DC07, the entire cyclone assembly must be removed to empty the dust, debris, etc. collected when vacuuming. On the top of the cyclone is a "trigger" that you lift with your finger to release the bottom catch, which allows a clear flap to open on the "clear bin," thus letting all the debris fall out. My problem is when you lift the finger trigger, it does not release the catch on the bottom. Since the catch won't release, I cannot remove the entire clear bin either from the cyclone.Any sug
Beofre you go to the extent of buying a replacement canister, you can remove the top and using a straightened coat hanger type thing open that bottom lid. Then maybe you can clean the rim and possibly add some silicone spry to loosen things up. Here' ... Dyson DC07 Bagless Upright Cyclonic Vacuum
The handle on my DC17 will not release so I can vacuum the floor
... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?
Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum
The handle release pedal wasn't allowing the handle to lower. I took off the pedal and saw the spring load part was broken. What is this part and how to replace it? Bissell 3760-3 handle release
Our vacuum recently had an issue with it's motor, we had to borrow a neighbors a couple times while we were trying to figure out what to do. We decided to take it to a place that specializes in cleaning supplies and cleaning tools to see if they had ... Vacuums
I have a Filter Queen Majestic canister vacuum cleaner. At the end of the wand, a button to release the attachement not only broke, but also one eyehole on the wand where one nipple on the button falls into. So therefore a new button isn't going to fix the wand because there isn't a hole on one side of the area where the button falls in place for a nipple to secure the button in place. IS THERE A REPLACEMENT PART FOR A NEW SECTION OF THE WAND WHERE THE RELEASE BUTTON IS SECURED IN PLACE THAT I C
... Filter Queen Majestic Canister Vacuum
I have a Kenmore vacuum cleaner model #116.34720. The problem I am having is that if you are rolling the vacuum around, the base will drop without pressing on the handle release pedal. This often results in a bunch of dirt being dumped back out. The manual doesn't show anything about adjusting the handle release pedal so it holds the handle and base in an upright position better. Any help is greatly appreciated! Thanks in advance!
How to keep the wand release catch spring on Dyson DC17 from falling out
... Dyson Vacuums
Handle release has stuck down and want release handle
Http://canada.bissell.com/FAQs_and_Answers.aspx go to web and see all information, video, troubleshooting, questions, and fix it.God bless you ... Vacuums
The retractable handle doesn't stay in place. a small spring came out near the button that you push to slide the handle up and down to change the length. i need to know where the little spring goes. there is a small pin that the spring fits around but i can't seem to get it to go back in place once the spring is on the pin.
... Panasonic Kenmore Canister Vacuum Vacuum
S catch i have taken the top part of handle off, removed the screws under hose wrap, and layed the bottom part of handle down, i cannot find the s catch, can you tell me exactly where it is and what it looks like. i have looked all over this thing. thanks randy the model # is 8905
\015\012\015\012Just pull where I marked, it should come loose. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
DC17 wand release catch won't release. wand stuck
... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
The mechanical off/on in the handle is not working with the electrical on/off switch upon removal of the handle you can cut the machine off by hand but after ensuring the the handle is re-placed in the proper position the machine will not turn off so what new handle or is the rocker switch has worn is now to hard for the mechanical switch to operated
Hi there it's SmartAlec from NelsonVacuums.com.au here. You are spot on in your diagnosis however i have fixed heaps of these and i have found no way to tell wether its the ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Water seems not being introduced to heating element,which is hot, Depressing the handle appears not to be releasing water from tank; very little if any steam or water comes out base even after holding the handle down for a prolonged period and or pumping the handle.
Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
I broke the handle part of the shark steamer #53101. I don't have the book to try to tell you the parts I need. Can you send me a picture or a copy of the steamer. It is purple. The above number may not be the correct one. It is broken in the center part. It has a little small circular piece that joins the two pieces which are broken. The beginning of the handle at the bottom of the steamer and the next session which has the steam release. The top of the handle is okay . It the middle and bottom
Hi,Ann there are very few parts for these...Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
Bissell 3595 handle release pedal spring(?) missing
I just fixed this on my Bissell PowerForce model #6594 vacuum myself. Woo Hoo for me. :-)\015\012\015\012I called the local vacuum repair guy and he told me he'd repair it for me if I insisted but that since my machine only cost about $80 ... Bissell 3522 PowerForce Bagged Upright Vacuum
Handle release stuck
Its as simple as pulling top casing of bottom part of vac off and replacing the pedal just pay attention to where the springs go as you take them out ... Electrolux EL8502 Versatility Bagless Upright Vacuum
Broken handle release
Most times they don't break, it is the 2 screw holes at the back that back and the top will raise up from the base. If this is the case, remove the 2 screws and install longer ones with a flat washer on them to fashen down the top. But first the to ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum
Handle Release Replacement procedure
... Eureka 4874 Bagged Upright Vacuum
Dyson DC07 Filter Release Catch removal
If its the part im thinking of its a small spade like catch thats glued into a hole in the chassis normally id lay the machine on its front and gently tap the old catch out with a flat end screwdriver and a small hammer be carefull its very brittle ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Whispertone powerhead handle release replacement
Take a butter knife and/or flat head screwdriver and press forward on the four tabs that retain the pedal. ... Kenmore 23313 Whispertone Bagged Canister Vacuum