Having problems with your Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum ?

Brush will not rotate - belt is not broken - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


Answers :

Replace belt It's not broken but its loose & its slipping over the motor shaft
Repair Help & Product Troubleshooting for Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brush will not rotate - belt is not broken - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


Replace belt It's not broken but its loose & its slipping over the motor shaft ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Bissell Power Track Cyclonic Upright Bagless Vacuum.. ..The spin brush works laying down....when upright it won't spin! I cleaned any and all hair from the roller....belt is not broken....but do I need a new belt though? The vac is a few years old bever replaced the belt yet.


You need a new belt. ... Vacuums

We have a Bissell Revolution Lift-Off Turbo 3760-1 and the upright brush is not working/rolling. It only moves when pushing the vacuum. We checked the belt and it seems to be fine. The vacuum works fine as a hand-held. Any suggestions? Thanks!


These belts need to be changed every 6 months regardless of the way they look. ... Vacuums

Broken belt how to fix i have a belt - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Take off belt cover on the left side of the top cover, turn cleaner over, take out screw from red lock and remove, pull cap and brush roll out, unhook the cogged belt, then you can replace the pump belt thru that opening. Put belt over the pump pull ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I have a problem with my model 6585-3 bissell upright powerforce bagless turbo with turbo brush vacuum The brush has quit spinning upon removal i noticed that one side of the brush was free to spin the other side that has the rectangular piece to help hold into place seems to be locked up and will not spin is it corroded or have i lost a piece that joins with it that allows it to spin freely belts are good and motor is turning brush will not budge


... Vacuums

My old bissell 3510 upright vacuum seems to have no suction into the bag...I replaced a broken belt several days ago, and now the vacuum picks up debris, but seems to just collect it behind a wheel..The bag does not "puff out" like it used to...How can I fix this??


... Bissell 3510 PowerPartner Upright Vacuum

How do you change the belt? - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

What belt # do I purchase for the model 6850 - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


You need this belt here:Bissell Lift-Off Revolution Belt ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Where do the belts go one busted in half - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Confirm your model number, then check http://www.bissell.com/SearchResults.aspx?searchtext=proheat%20&mode=userguides ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Bissell proheat turbo 2x upright cleaner .there is no water being released onto the carpet, does this mean the belt is broken?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My brush will not turn on my Bissell 6393 upright bagless vacuum... what is wrong? The belt broke and I replaced it twice... I now have 6 more replacements but the brush still won't rotate. Do I have to get a new brush?


This type of plastic brush roll fails pretty frequently. Hair and other debis gets jammed in the end caps. The hair and debris gets hot which in turn tends to melt the plastic end caps. Remove your brush roll, hold the ends with your fingers and try ... Vacuums

The diverter is broken , how to change it - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Brush wont go round but the belt is ok - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


The belt may look okay but it can still be stretched. If it is stretched it won't turn the brush against the resistance of the carpet. Here is a link to the belts you need and to the manual which has instructions: ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

I accidentally sucked up a string. The brushes stopped rotating and the suction was low. I took the frame off the brushes, and the rubber belt came out. How do I re-attach the belt/fix this problem? It is a Bissell power force turbo upright.


You'll need to replace the belt. \015\012On uprights with rubber belts, the belts need to be replaced every 3-6 months due to the fact that since the belts are rubber, they stretch, and once they stretch out they decrease the rotational speed o ... Bissell Vacuums

How do I change the Brush Belt? - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


It depends on the type of ProHeat cleaner you have. But you can go to www.bissell.com and download the manual for your model and you can get the belt you need at ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Need a new belt for a bissell upright lift off revolution bagless turbo vacuum.


Hi Dale! Here's a quick link to order the belt.\015\012http://www.bissell.com/parts/?id=9143&sc=part&partid=4686&cid=ccsoci ... Vacuums

How do u change the brush belt - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Here is a link to the belts you need and a manual you can\015\012view which has instructions:Bissell Carpet Cleaner Belt and Manual ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

How do you change the belt - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Hi there SmartAlec from NelsonVacuums.com.au here. Bissell have a very good guide on their website bissell.com.au here is a link to the product i think you have ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

The belt on my vacuum cleaner model 6596 bissel powerforce bagless turbo keeps breaking. As soon as I put on a new belt and start it up the belt snaps. It is the durabelt meant for this vacuum model. Also, my son has been having the same problem with his. He has the same model and same belt. This problem is occurring even after a thourough cleaning.


I would guess you aren't centering the belt correctly, thus it's edge is caught between the brush and another solid object, causing the breakage.\015\012When you get the belt on the the brush and the brush back in place, turn the brush a few ti ... Bissell 6596 Bagless Upright Vacuum

Instruction manual for bissell proheat turbo - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have a bissell healthy home vacuum and the roller bar on the base of it is not working. I have checked it for obstructions and it is clear. I have also tried reseating the canister and just about everything I can think of. It's almost like the switch that deterrmines whether or not the vacuum is in the upright position is broken and always says it is upright... any way to fix that? Thanks, Scott Hammersley


... Bissell Vacuums

How to change belt on Bissell 6582 vacuum - Bissell 6594 PowerForce Bagless Upright Vacuum


Here is a link to the belts you need and to a manual you can view with instructions.Bissell PowerForce Belts and ManualHope it helps ... Bissell 6594 PowerForce Bagless Upright Vacuum

A small belt fell from underneath my bissell steam cleaner and I notice the brushes no longer rotate when I purchase the part where does it go? I tried turning it up side down to find out where it came from don't know because there is a compartment for the belt access but that particular bet is not broken. It's a very thin belt I can not make out the number located on the belt please help.


If you are unsure about where it goes it may have a diagram in the owners manual. When you say you saw a belt in a compartment are you sure that it is not an extra belt you are seeing as they often give an extra in the machine kept in a compartment l ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

Hoover Upright...OLD vacuum, broken belt


The rod must be your brush roll. it should just pull out, Have you removed the cover over the brush roll? When you do get the brush roll out, turnb the ends and make sure they turn freely, if nit, replace it also. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1206 seconds