Having problems with your Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum ?

Brush wont go round but the belt is ok - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


Answers :

The belt may look okay but it can still be stretched. If it is stretched it won't turn the brush against the resistance of the carpet. Here is a link to the belts you need and to the manual which has instructions:

Bissell Lift-Off Revolution Belt & Manual
Repair Help & Product Troubleshooting for Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brush wont go round but the belt is ok - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


The belt may look okay but it can still be stretched. If it is stretched it won't turn the brush against the resistance of the carpet. Here is a link to the belts you need and to the manual which has instructions: ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

My bissell wont spray - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Depending on which bissell you have; I would check the heater. If it is a newer module I would check the solenoid switch. The heater heats the soap up so much that it clumps the soap up and clogs both of these parts. I would also check the tips thems ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Bissel pet turbo eraser not working - Bissell 6595 Lift Off Bagless Upright Vacuum


... Bissell 6595 Lift Off Bagless Upright Vacuum

My bissell wont spray water or suck up water - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

We have a Bissell Revolution Lift-Off Turbo 3760-1 and the upright brush is not working/rolling. It only moves when pushing the vacuum. We checked the belt and it seems to be fine. The vacuum works fine as a hand-held. Any suggestions? Thanks!


These belts need to be changed every 6 months regardless of the way they look. ... Vacuums

I have a Bissell Lift-Off Revolution upright vacuum cleaner. The dirt is sticking around the black round sponge filter which is in the upper part of the cleaner. It isn't falling into the bowl like it should. What could be the cause of this?


Thats what its supposed to di i suggest to clean that filter after every couple of uses to prevent any problems in the future ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

It blows instead of sucks - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


Sounds like your motor is not working like it should. Take to a repair shop and have it looked at. ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Brush will not rotate - belt is not broken - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


Replace belt It's not broken but its loose & its slipping over the motor shaft ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Water wont spray out - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Sorry to hear you're having difficulty with the spray. Here's a quick link to troubleshooting. \015\012http://www.bissell.com/FAQDetail.aspx?id=1065& ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Need tel number for manual - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


You listed this under a Bissell Lift-Off so I am assuming your looking for a Bissell manual. You can reach Bissell at \015\012(800) 237-7691or you can download your manual below. Your unit should be a 3750 or a 3760. ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

The tank wont re attach properly - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Do the roller brushes freeze up? - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


Bissell rollerbrushes do tend to freeze up. They usually create so much friction to the endcaps and bearings that the ends melt and the brushroll freezes. you should always look for a vacuum which has a metal roller brush they will last alot longer, ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Wont spray solution out the front - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


That means that the pump belt is worn and needs to be replaced. Here is the belt you need and a manual you can view:Bissell Proheat Belt ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Wont put out cleaning solution or water - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Need a new belt for a bissell upright lift off revolution bagless turbo vacuum.


Hi Dale! Here's a quick link to order the belt.\015\012http://www.bissell.com/parts/?id=9143&sc=part&partid=4686&cid=ccsoci ... Vacuums

What belt # do I purchase for the model 6850 - Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum


You need this belt here:Bissell Lift-Off Revolution Belt ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Water wont come out fo the steam cleaner. - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Try adding a table spoon of salt to the water. ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Bissell Lift-Off(R) Revolution(R) Turbo Upright.


If you have a rubber smell, then the belt is slipping, does the brush roll turn freely while holding the ends? If not then replace it, part #2036619, if it is ok, then the belt has strectched and is slipping under load, part # 2106679, Style 8. ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Instruction manual for bissell proheat turbo - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

My Bissell 25A3 ProHeat wont spray water - Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum


I had two problems. No water was coming out of the main unit (it was working fine via the powerbrush) and the flow indicator wasn't spinning. Because I'm out of warranty, I did two things (after trying all the options that were posted).\015\012 ... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum

My Bissell will not suck up pet hair or dirt - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Bissell proheat isn't spraying water out - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Hi,As the weather is getting warmer for many people their freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong. If you are hearing a clicking or buzzing ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

My Bissell will not **** up pet hair or dirt - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


Hello,\015\012Dirt hair and such will build up in the hoses of that vacum. Take them apart stretch them out and run something through them to make sure they are clean. \015\012The other problem is the filter in the bottom of the cup. At l ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

The bissell proheat will not suction - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


Try the following suggestions to see if you can get your machine suctioning properly:\015\012\015\0121) Remove the Tank-in-Tank Assembly and place your hand over the motor intake valve. This valve is located next to the Floor Nozzle gaske ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

I have a Bissell Lift-off Revolution Turbo vacuum and the brush doesn't spin on its own anymore. Does this mean the motor is busted because there's no noise when you press the brush button. We've just replaced the belt, hepa filter and a new brush. But its still the same. What's wrong with my vacuum?


Its probably the motor. remove the covers with a #2 phillips head screwdriver and cut the wires to the motor ( unplugged ). purchase some crimps at radio shack to resplice the wires together in the same fashion. ... Bissell Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1362 seconds