Having problems with your Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum ?

Why does bissel upright vaccume get hot and shut down


Answers :

Repair Help & Product Troubleshooting for Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Why does bissel upright vaccume get hot and shut down


... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

It gets hot then shuts off. - Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum


Most problems with over heating is coased by blockages in the pipes, the main one is behind the brushbar take the sole plate off and there's a suction pipe that is normoly the one that's blocked ,hope this helps you...... ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

After running for a while vaccum shuts off machine gets hot even after cleaning out cannister


Check everywhere for blockages and make sure filters are clean ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

Motor shaft gets hot - Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum


... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

My bissell proheat upright steam cleaner is spraying out through the attachments just fine, but will not spray to the floor when using upright. we've taken it apart to find that there is no water at all going through one of the hoses, but it appears the hose is connected behind the on/off and heat switches, we can't seem to figure out how to get in there to replace that hose....any suggestions on how to access this?? just curious how you would get in to replace the hose, we know it is the hose..


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I misplaced the manual for the Bissell Momentum Cyclonic vaccum. Every website Ive found for links to get the manual only take me to Bissell vaccuming parts for sale,and I do not wish to buy parts, just need the manual.


... Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum

Bissel upright vaccum model 6594


Try pushing brromstick or long pieceof conduit thru hose youmight think you have everything out of the hose ... Bissell 9200 Upright Vacuum

Does anyone know where I can get a motor bearing for the 3595 upright vacuum. Called Bissell and they say I have to be an authorized dealer to get "internal" parts and called their "authorozed dealer" and they told me they cannot get the part and I needed a new motor...ridiculous! Anyone put a bearing on these and if so where did you get it from?


Bought the whole motor assembly for mine, no bearing only part available. THis vacuum now headed for its third motor. " $45 dollars is still cheaper than a new vacuum". That's what I said the first time... ... Bissell CleanView 3596 Bagless Upright Vacuum

Not clogged, dirt emptied, but gets hot and shuts off


Hi Cyndi.\015\012\015\012Try this site for help has it service manuals, http://dysonmanuals.llc.nu/ ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Motor gets hot in moments and shuts off


True, the motor has safety measures to stop it from overheating... that's why it shut down. You smelled something, so some kind of damage was done. It's possible that the over temp switch itself got fried. Doesn't sound too good from here. ... Filter Queen Majestic Canister Vacuum

When the vaccum is running the motor gets hot & smells & is very noisy.


Sounds like yu may have a clog, either in the inlet by the brush roll, or the hose. If the hose comes loose, see if there is suction there. If no suction then it is clogged. If suction, then the inlet maybe clogged. ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

How to get to the belt on a bissell momentum - Bissell 3910 Bagless Upright Cyclonic Vacuum


... Bissell 3910 Bagless Upright Cyclonic Vacuum

Can't get water tank out to get started - Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum


Lay handle down to back all the way and flip the round shaped handle on the rear of the water container to the front half way as if you were going to pick a bucket up by the buckets handle, and pick it up just like a bucket and when you return it mak ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I cannot get my bissell proheat to spray - Bissell 8920 ProHeat 2XTM Upright Vacuum


Open the machine and remove water heater, then remove all seven crews and clean the inside of the water heater, then replace the heater. ... Bissell 8920 ProHeat 2XTM Upright Vacuum

I just used my Bissell Proheat, when I heard the vacuum sound get lower and lower then suddenly something "gave" and it got very loud and started emitting a burnt rubber smell. It still worked to put liquid into the carpet; seemed to have trouble getting it out. I checked the tank, filters, belt, and roller and all seemed OK - but when I started up again and looked down I saw sparks in the motor/belt area and shut it down immediately. Any thoughts?


The bearing that is located at the top of the vacuum motor has failed . Because of that the shaft of the motor's rotor is out of position and the pulley attached to it has started rubbing on the other pulleys, giving you that smell. the spark appear ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How to get water to spray on my bissell 8920 - Bissell 8920 ProHeat 2XTM Upright Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8920 ProHeat 2XTM Upright Vacuum

Why do we not get any water to come out of bissell proheat clearview model 1699? thank you Bissell 1699 Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

When I was using my Bissell ProHeat 7901, I smelled something hot (almost burnt) and turned off the vaccum. When I turned it back on, everything seemed to be working, but the vaccum part was not making the same sound. The bristles are still turning, but it isn't picking up as much and is leaving quite a bit of lint on the carpet. Could the belts be worn? How do I tell? Thanks!


Ya that is probably the issue. Here is a link to the belts you need and to the manual which has instructions:Bissell ProHeat Belts and M ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Over heating? My 10 gallon 4HP shop vac has started shutting off after about 30 sec. after I turn it on to use. It smells real hot after I shut it off. I have changed the filter and the bag, which did not solve the problem. Any suggestions on what the problem could be? It's only about 31/2 years old and I really don't use it all that much, mainly for getting up dust and cob-webs from my garage.


It sounds like you need to replace the motor in it . thank you for using fixya ... Shop Vac ShopVac 3 HP 2 Stage 10 Gallon--Automotive Wet/Dry Vacuum Vacuum

I have a Kenmore bagless vaccum 12.0 amps I need help with get the canister off so it can be emptyed It is a upright vaccum.


Which model is it? ... Vacuums

While vacuuming it gets hot and shuts down


It's probably just overheating. You have to take the vacuum apart and clean it thoroughly. There is probably a "plug" of dirt/hair/gunk clogging a hose.I have had cheap vacuums that last years as long as I clean them regularly. ... Vacuums

Bissell aroma pro upright carpet cleaner wont push foward keeps getting stuck


... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

Hair gets stuck in upper filter basket instead of going into the lower basket that you are supposed to empty. It is a Bissell 37604 Lift-Off Revolution Pet Bagless Upright Vacuum Cleaner


Check both filters. If one or other is increasingly dirty, wash or clean it out. Also check the air waves leading to the bagless bin canister part. If one air way is blocked the remaining dirt will try and access the bin other way due to the natural ... Vacuums

Bissell lift-off revolution, motor gets hot, loud whining sound


... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Bissell 1698 PowerSteamer ProHeat Upright will not work. The brushes spin, the soap comes out, but no water is getting to the carpet.


Bissell 1698 PowerSteamer ProHeat Upright will not work. The brushes spin, the soap comes out, but no water is getting to the carpet.\015\012 \015\012You may try the trigger assembly may not be releasing ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0785 seconds