Having problems with your Bissell LiftOff Revolution Pet Vac 37602 Vacuum ?

The brush is not working anymore - Bissell LiftOff Revolution Pet Vac 37602 Vacuum


Answers :

Your drive belt is probably broken. They usually need to be changed every 6 to 12 months. If you haven't replaced the belt recently I would try that. You can get the belts you need through this link and also view the manual which has step by step instructions on how to change the belt. hope this helps!

http://www.vacbelts.com/bissell-lift-off-revolution-pet-vacuum-belt-.htm
Repair Help & Product Troubleshooting for Bissell LiftOff Revolution Pet Vac 37602 Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The brush is not working anymore - Bissell LiftOff Revolution Pet Vac 37602 Vacuum


Your drive belt is probably broken. They usually need to be changed every 6 to 12 months. If you haven't replaced the belt recently I would try that. You can get the belts you need through this link and also view the manual which has step by step ins ... Bissell LiftOff Revolution Pet Vac 37602 Vacuum

Bissell revolution has no suction - Bissell LiftOff Revolution Pet Vac 37602 Vacuum


... Bissell LiftOff Revolution Pet Vac 37602 Vacuum

Bissell lift off no suction - Bissell LiftOff Revolution Pet Vac 37602 Vacuum


... Bissell LiftOff Revolution Pet Vac 37602 Vacuum

Will not **** in with any power - Bissell LiftOff Revolution Pet Vac 37602 Vacuum


Clean the filter and check to see if the hose is clogged ... Bissell LiftOff Revolution Pet Vac 37602 Vacuum

Has no suction - Bissell LiftOff Revolution Pet Vac 37602 Vacuum


Check the suction pipe behind the brush bar it's probably clogged ,this link is the manual..........http://uk.bissell.com/images/UserGuides/3760E_1105.pdf ... Bissell LiftOff Revolution Pet Vac 37602 Vacuum

Bissell Lift Off pet revolution vacuum losing suction


You may have a clog in the hose. Unhook the hose and see how the suction is there, if ok, then check the dirt inlet by the brush roll. If suction is low at the hose, then there is a clog in it. ... Vacuums

Pet turboeraser tool not working - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Troubleshoot Bissell Lift-Off Revolution Pet Vacuum Cleaner


Probably a hose clog. Check the hose on the back of the cannister. Most likely clogged where it attaches to allow debris into the cannister. If cannister is not filling up, that's a sure sign. To remove from top of back of cannister, just turn th ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Bissell lift off pet revolution vacuum smells bad when I vacuum!


Put a BOUNCE sheet inside the filter ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

My Bissell Lift-Off MultiCyclonic Pet Upright Vacuum with Detachable Canister, Bagless, 89Q9 quit working while I was vacuuming. The power ceased and now it won't turn on. What should I do?


... Bissell 89Q9 Bagless Cyclonic Vacuum

We have a Bissell Revolution Lift-Off Turbo 3760-1 and the upright brush is not working/rolling. It only moves when pushing the vacuum. We checked the belt and it seems to be fine. The vacuum works fine as a hand-held. Any suggestions? Thanks!


These belts need to be changed every 6 months regardless of the way they look. ... Vacuums

Bissel pet turbo eraser not working - Bissell 6595 Lift Off Bagless Upright Vacuum


... Bissell 6595 Lift Off Bagless Upright Vacuum

I have a Bissell Lift-off Revolution Turbo vacuum and the brush doesn't spin on its own anymore. Does this mean the motor is busted because there's no noise when you press the brush button. We've just replaced the belt, hepa filter and a new brush. But its still the same. What's wrong with my vacuum?


Its probably the motor. remove the covers with a #2 phillips head screwdriver and cut the wires to the motor ( unplugged ). purchase some crimps at radio shack to resplice the wires together in the same fashion. ... Bissell Vacuums

Kenmore canister vacuum model 116-25512506. It has a 2 stage switch on the handle, the vacuum motor will not work, the carpet beater attachment does work, the vacuum motor will not cut on at all with either stage, 1st stage is vac only, 2nd is vac a carpet attachment. Carpet attachment will work, vac does not.


Try to find the reset button. It should be somwhere near the bottom area. It looks like a red dot that you can push inward. If you can press and hold the reset button, it will restart your suction and solve your problem. ... Vacuums

I have a Miele S1721 Powerhouse upright vacuum. When the belt broke I took it into the shop (because when i tried to replace the belt, the tension was so tight I couldn't get it back together!!). When I got it home I DISCOVERED THAT THE HEIGHT ADJUSTMENT DIDN'T WORK anymore. It seems like it's set really hight, because it no longer contacts and brushes the carpet. So it's now useless. I went back to the shop and the tech denied that there was anything wrong. (I didn't have the vac with me). No


Hi\015\012The Miele uprights (S170 and upwards) with the Powerhouse title are ALL Panasonic uprights which have been at one time sold in the UK. Therefore the upright may use TWO drive belts which need to be looked at: Take off the sole plate a ... Vacuums

Bissell Power Track Cyclonic Upright Bagless Vacuum.. ..The spin brush works laying down....when upright it won't spin! I cleaned any and all hair from the roller....belt is not broken....but do I need a new belt though? The vac is a few years old bever replaced the belt yet.


You need a new belt. ... Vacuums

Attachment not working - Bissell Vac Lift-off Pet Deluxe Deep Cleaner


Hi! The issue with the attachment may be easily rectified. Here's a quick link to our FAQ's. \012\012http://www.bissell.com/faqs/? ... Bissell Vac Lift-off Pet Deluxe Deep Cleaner

My steam vac was working...i thought the dirty water was full but it didn't make the hi pitched noise now that i think about it.....now it is not sucking up the dirty water.....i checked to make sure it was placed right and can't visually find anything wrong....help! i have pet stains to vacuum up...this is only about 1 year old.....


\015\012The most common reason for lack of pick up is that the lid is not fully seated on the dirty water tank. Be sure to hook the two tabs on the front of the lid, and then snap the rear latch into place. Another reason is that the duct on th ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Hair gets stuck in upper filter basket instead of going into the lower basket that you are supposed to empty. It is a Bissell 37604 Lift-Off Revolution Pet Bagless Upright Vacuum Cleaner


Check both filters. If one or other is increasingly dirty, wash or clean it out. Also check the air waves leading to the bagless bin canister part. If one air way is blocked the remaining dirt will try and access the bin other way due to the natural ... Vacuums

BISSELL - Lift-Off Revolution Pet Bagless Upright Vacuum main brush stopped turning


Check your belt ... Bissell Vacuums

My Bissell bagless vacuum does not seem to work anymore. It will start to with a suction and then instead of picking up the dirt, it appears to blow the dirt out almost in a cloud of dust and debris from the front.


This is caused by a dirty air filter and/or a blocked vacume hose ( most of the time the blockage is at the bend where the hose enters the floor sweeper area ) ---\015\012remove and tap out and brush the filter ( or use a air compressor to blow ... Bissell 6595 Lift Off Bagless Upright Vacuum

I have a Bissell pet hair eraser model #3920. It's been working great until last night. I went to use it and the brush won't spin. It also smells like it's burning. I checked the belt and it looks fine, and the brush spins by hand easily. It's not clogged anywhere that I can see. Anyone have any other ideas? This vacuum is only 8 months old.


- Remove the access panel, which is on the bottom of the machine. There are 4 tabs to lift on the access panel to remove. Start with tab 1 then 2-4 tabs.- Check the brush, and belt for any damage. Clean off any debris on the brush. ... Bissell 3920 Bagless Upright Vacuum

I just need to know what belt I need to purchase for the bissel liftoff revolution vacuum


Here is the belt if it is a bag-less modelhttp://www.totalvac.com/B-3200ES.html ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Bissell Pet Hair Erase does not vacuum.


It is because the belt is worn or stretched and needs to be replaced. Here are the belts you need and the manual which has instructions:Bis ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Troubleshoot bissell pet hair eraser vacuum


... Bissell 3920 Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1178 seconds