Having problems with your Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum ?
Sprays water without pushing the spray button
Repair Help & Product Troubleshooting for Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Sprays water without pushing the spray button
... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Water is not spraying out when button is pushed.
My guess is the wire to the switch came off - unplug unit - unscrew the top two screws on the handle - remove the cover above the button. should be two wires connected to the switch - the top one is not used. Hope this helps. ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum
Water only dribbles out when button is pushed. It no longer sprays. Have cleaned nozzle several times.
... Bissell 1725-1 Little Green ProHeat Wet/Dry Vacuum
The trigger on My Monster 1200W is not working. I poured the water in the canister and it sounds like it is steaming but when i go to push the button it doesnt spray.
... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Bissell will spray water when set to water rinse, but as soon as it is set to light, normal, or heavy cleaning, there is no spray. I have tried priming but to no avail. I put plain water in the solution tank to test without ay success. It is like it loses it's prime whenever you try to use a solution mix. Once you set it back to water rinse only and go through the priming steps, it is OK. Any help would be appreciated. Thanks.
Please check the following with liquid in both tanks.\012 \012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\012- Check for ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
Water will not come out when i push on trigger button. So water does not come out. I have taken it apart and cleaned it. The problem seems to be in the triggerI push on the handle to release the water.
Order the part from bissel see if that fixes sound like you know what wrong just need get part number from bissell.Could be some kinda pump also thats bad not pushing out the water.I got bissle heated one black it only problem the seals r ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
The tool attachment for the hose on my Bissell ProHeat 2X CleanShot won't spray soap or water. The bristles on the tool rotate without a problem and the suction is working fine, it just won't spray water when I pull the little gray trigger on the tool.
Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
Re. Proheat / Protech model No spray happens, I have made sure both the water bag is full & the cleaning fluid are both fully located, the water does seem to be getting into the carrier without having been sprayed.
Usually when it doesn't dispense water that means that the pump belt is worn. Here are the belts you need to replace and the manual:Biss ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
I have a Saeco water kettle and it will not boil water. I just recently started having this problem. When I push the boil button, the water kettle will glow red for 5 seconds. Afterwards, it automatically shuts off.
You have a thermal sensor thats gone bad causing it to turn of ... Vacuums
I have the Oreck Sanapathic DMS2000 Handheld Steam Vacuum, but no steam comes out when I push the button. I hear the motor, is there any buttons I am missing or any help on how to make it work, been plugged in for 5 min now. Held button down for 2... nothing. Just a drip of water.
ORECK DMS2000 No Steam First, tested tank and filter flow together using suction via plastic tubing. Worked freely Second, removed pump and disconnected hoses and terminals [watch location,three terminals on pump, two plugs] ... Oreck Sanapathic DMS2000 Handheld Steam Vacuum
My culligan mark 50 water conditioner just poped its blue "push for softer water" button. I have the water source turned off. How do I fix this thing?
While using my mop yesterday, it stopped letting steam come out. Tonight I plugged it up again and you could hear it trying to steam. I push the button in to release the square frame and it pushed out a burst of steam and pushed the head off. Put it back together and it still will not let steam out. No matter how much water is in it.
\012Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Ste ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
When you push sprayer the water keeps spraying till tank is empty
Manual is here: http://www.bissell.com/images/UserGuides/7901_1008.pdf ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
Power scrub handle: when you push th button in it drips not spraying like it should
... Hoover Steam Vac Dual V w/ SpinScrub Vacuum
Irobot runs without pushing power button
... iRobot Roomba 4210 Bagless Robotic Vacuum
Spray button doesn't function on Eureka Atlantis.No water spray.
Should be mechanical, torx screws are easy to remove with a torx screw driver ... Eureka Atlantis 2595A Upright Wet/Dry Vacuum
How do you unclog heater so water will spray. will not spray water/soap when trigger is pushed. Red spinning indicator will spin for a second then stop.
You can use either high pressure air or pin to clean out the jets. Then you can also spary off or rinse the screen filter ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
My Bissell Proheat 12 amp is hard to push forward(whether on or off). There is a loud clicking noise when pushing forward and it ''jumps'' up on every loud click. It's OK when pulling backwards, sprays and vacuums up water. Belt appears OK. Thanks
I had this same problem and here is what solved it for me. On a previous cleaning session, my wife decided to take the two front screws out of the clear plastic shroud that covers the brushes in order to clean behind it. Upon re-installation, she did ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
Bissell carpet shampooer, how do I use it there was no manualI just need bASIC INSTRUCTIONS I'm guessing push button to release shampoo, go over the whole area, scrub as necessary, then it will **** up drity water. Question there is a rinse button Does that mean that I have to go over it again 3x?
Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
I have a RIVAL Vacuum Sealer Model VS150. I need to repair the power button that is located under the cover. It looks like someone pushed the button into the machine without lowering the cover. I live in Bridgewater, MA & the address on the unit is in Milford, MA. Any suggestions.
My Bissel 12 amp carpet cleaner will not dispense water when I push down on the button on the handle.I thoughly cleaned the machine it sucks water up but doesnot disperse
The water pusher needs to change. ... Vacuums
I have a DC24 dyson and it is not having suction without white button on canister pushed in.
Hi there, it's Jack at Dyson.I'm sorry to hear your DC24 doesn't seem to be working as well as it should be. The white button you've described is the suction relief valve - this helps protect the motor if the machine is used when blocked. ... Dyson Ball DC24 Bagless Upright Vacuum
My machine makes a terrible(bearing type ) noise when I push the pump button, and it will not spray out solution
... Rug Doctor 95341 Wide Track Professional Carpet Deep Cleaner
The spray button on my bissle power steamer spray button sticks.
You may want to replace the belt. bissell uses a belt driven pump. here is a guide to show you how to replace the belt. ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum
When I push the button to release the water to start the steam process, nothing happens
You will need to remove the heater coil that is located in the handle, remove and mark allthe hoses and wires then remove the screws from the plate on the coil, make sure to not lose the red seals you will see alot of calcium build up use a brush to ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum