Having problems with your Bissell SpotBot Robotic Wet/Dry Vacuum ?

My Spot bot lost all suction through the hose. It

\015 My Spot Bot lost all suction through the hose. It has plenty at the dirty water canister. I used Bissell's trouble shooting techniques I even tried to use the air compressor to blow the clog free but it still did not help.I always clean it after each use but I do have a long hair dog. When I first got it it was amazing. I even tried the water in a bucket but it can barely fill the canister. I think my only choice would be to disassemble, and yes it is still under warentee. But I hate to send it back for a clog.\015\012Help, I have a very old dog (15; June 6th) that requires almost daily use.\015

Answers :

Repair Help & Product Troubleshooting for Bissell SpotBot Robotic Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Spot bot lost all suction through the hose. It


... Bissell SpotBot Robotic Wet/Dry Vacuum

SPOT BOT NO SUCTION


Hey Courtney! Sorry to hear about the suction problem on your SpotBot. Here's a quick link to troubleshooting steps to assist you.\015\012http://www.bi ... Bissell SpotBot Robotic Wet/Dry Vacuum

My Bissell spot bot does not **** the cleaning fluid out to the carpet. It has suction from the carpet to the machine but not from the machine to the carpet?


... Bissell 12005 Spot Bot Handheld Vacuum

Model 7887 spot bot will not spray cleaner nor suction up cleaner


Is the motor running in the unit, when you start.If not, then motor has to be checked.Sometimes the motor gets dirty and it gets blocked by dust.Getting the motor cleaned, helps.But if its still not turning ON.Then motor is the issue it has to ... Bissell Vacuums

Lost suction my DCO7 lost suction in the hose I started taking it apart and cleaning it and looking for clogs (probably more than I should have) and when I put it back together it has awesome suction in the hose but no suction in the base. It just pulls the pine needles up (christmas tree) but they never appear in the "bag" compartment and when I look they are just all gathered in a clump in the bottom by the brush.


Hi.\015\012\015\012Remove the sole plate turn the 3 plastic screws to unlock & lift off.\015\012\015\012Now remove the blockages that have accumilated from the oppening of short clear hose.\015\012Check you can turn ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Clean bissell spot bot brush


NONE of these answers apply to the question! The asker referred to the Bissell SPOTBOT, which doesn't have a push handle. I'd like to know how to remove the brush myself. I know how to remove the components but haven't been able to figure out how to ... Bissell SpotBot Robotic Wet/Dry Vacuum

Lost suction Been using hoover steamvac today, worked great for the fist 2 hours, got ready to start back at it, and it has lost suction, have tried and tried the water tank repositioning, and nothing seems to work.


There is a screen by the brush that may be clogged. Make sure the water tank is on tight ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Spot Bot My spot bot leaks water when it is vacuuming up the cleaning product. Where can I get in fixed? I live in Bedford Texas,near Fort Worth. Zip 76021


Their customer service # is 1-800-237-7691 and they can tell who to call for service. You can also go to bissell.com, there is a link for service centers, just put in your zip code and a list will come up. \015\012\015\012\015\012\015\0 ... Bissell 12005 Spot Bot Handheld Vacuum

Need bissell spot bot oners manual - Bissell 12005 Spot Bot Handheld Vacuum


BISSELL User's Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User's Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell 12005 Spot Bot Handheld Vacuum

Lost suction was vacuuming and lost suction


Hi Rick,I apologize for our delayed response. I am sorry to hear you are having difficulty with your DC23. Based on the details you provided, an obstruction may have developed. For step by step instructions on how to locate and remove a blockage, ... Dyson Stowaway DC23 Bagless Canister Cyclonic Vacuum

My Bissell spot bot stopped sucking the solution from the container. When we had the problem before we just reseated the container and it started releasing the water/solution. There is a funk little hole that takes water from the container and it seems to move around a bit. We own 3 spot bots, and have had trouble with all of them.


... Bissell 12005 Spot Bot Handheld Vacuum

Dyson DC 14 lost suction to beater bar/ suction to hose/stick


My Dyson DC14 had no suction...see if this works...turn the Dyson upside down...there is a length of hose that connects the bottom of the vacuum to the top, careful remove one end of the hose and check for debris...mine was clogged. Removed the clog ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Automatic Clean on Spot Bot 1200 dosent work


Ted, it can be bear when the auto settings aren't working. One of our service centers can inspect and fix any warranty repairs needed.To locate a BISSELL Authorized Service Center, please click on the following link: ... Bissell SpotBot Robotic Wet/Dry Vacuum

Dyson vacum cleaner lost suction got the DC14 and it doesn't seem to have much suction in the floor head, the hose still has good suction. I have checked all the paths for blockage and there is none.


Hey, this is Leland with Crucial Vacuum,\012\012If your unit's suction has decreased there could be several reasons.\012\012Firstly, the motor may be the problem. If you hear any noises while the machine is running, you should contact ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Hoover Windtunnel My Hoover Windtunnel is 3 years old. It worked great until yesterday when it lost all suction. I have followed the manual to trouble shoot any possible clogs and could find none. Then I noticed that when I remove the dirt collection cup and held my hand over the vent the suction is fine and strong. So... I replaced the hepa filter thinking that might be the problem. That didnt' work. The motor runs fine. The suction without the dirt cup inserted is strong. As soon as you insert


Mine does the same thing. There is no suction. I found that there is a door that opens when you tilt the handle in the down possition. I think there should be a spring in place so it can open. Until I find a replacement spring I have to open the door ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Hoover Windtunnel My Hoover Windtunnel is 3 years old. It worked great until yesterday when it lost all suction. I have followed the manual to trouble shoot any possible clogs and could find none. Then I noticed that when I remove the dirt collection cup and held my hand over the vent the suction is fine and strong. So... I replaced the hepa filter thinking that might be the problem. That didnt' work. The motor runs fine. The suction without the dirt cup inserted is strong. As soon as you insert


Either the hose has a clog, or the inlet down by the belt is clogged. Is there suction at the end of the hose, if not then it is clogged. If there is suction, then it has to be clogged down below by the brush roll, check that inlet. There also is ... Vacuums

No Suction I have a dc18 dyson and it had lost suction from the main hoover and the hose part. If you remove the dust collection part there is suction from the hole behind that part. I have cleaned all part to this hoover but the problem is still there. Any help would be apprieciated. Thanks


Filter removal step 1Turn power off and unplug the machine.\015\012\015\012To remove the washable filter: Rem ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Lost suction. When up right there is suction but when I put it down to clean carpet no suction


Hello,There are several things that this could be. Probably the \015\012most common problem that we see when customers come in with this problem\015\012 is actually a fairly simple problem to fix. Here are just a few things \015\012that t ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Spot bot stained white berber


... Bissell SpotBot Robotic Wet/Dry Vacuum

I need a new pump for my spot bot


... Bissell SpotBot Robotic Wet/Dry Vacuum

My Infinity Shark vacuum has lost suction. The pitch sound changes very soon after turning it on. I believe the lower hose is clogged, and I cannot get the body cove unattached where the hose bends upwards into the chamber. So much for their claim of never losing suction!


... Vacuums

EF 1750 has lost suction power. There is a noticable decrease in suction power even at the power unit inlet.


Disconnect the actual pipe where it meets the vac. Then test the intake for suction. If you have poor suction still, check the intake itself from inside the vac body for blockage, then check the gasket on the pail for mis-alignement.If yo ... Easy Flo EF1750 Central System Vacuum

I have a Kenmore Elegance model 116 that has lost suction. There is no blockage and both the filter and bags have been changed. The powerhead turns on but the vacuum itself is fairly quiet, not sure if that motor is running. How can I regain the suction?


... Kenmore Vacuums

No suction my dyson has lost its suction ability. I have to vacuum over things repeatedly ...and still not convinced its being picked up


Lost manual: How do I unhook the clear plastic base unit that holds the dirt after it is sucked in: ... Dyson Ball DC24 Bagless Upright Vacuum

NO SUCTION My Electrolux Z2274 upright vacuum cleaner has lost it's suction and is very noisy. Have checked and rechecked there is no blockage. Have cleaned the filters. In fact done everything I can think of. Any one know why and how to fix this??


If you have no suction, there are only a couple of things that could cause it. As you have checked for blockage, and changed your filters, you may have a vacuum motor with bad bearings, or broken fan blades (inside/on the vacuum motor). Either sympto ... Electrolux Central Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0508 seconds