Having problems with your Bissell SpotBot Robotic Wet/Dry Vacuum ?

My Bissel Spotbot will only let me use the Manual Mode, when I try to push "Set in Stain" or "Surface" stain the light won't turn on. My children were playing with it, but I don't know what they did. The Manual mode is still working. Any suggestions?


Answers :

There is a small magnet in the end of the hose. Under the phillips screw and plastic cover. Mine rusted to bits and stopped tripping the switch. A bit of a super strong hard drive magnet siliconed back in the end of the hose and all was fine.
Replaced the hose, a $19.95 part, on my SpotBot; and when re-assembled, same problem; no auto-spot mode. Tried resolution of using an EARTH MAGNET (or "super strong hard drive magnet") and COULDN'T LOCATE SAID SWITCH... Is it possible to attach visual?.? I opened the thing up (again), and couldn't see switch or trigger other than a push-button like switch at END of hose attachment (where you'd snap the brush on). Is this the switch you're referring to?.?

PS- The "wiring diagram" below contains NO WIRING DIAGRAMS AT ALL. Bissell even removed their link to User's Guides...
Repair Help & Product Troubleshooting for Bissell SpotBot Robotic Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Bissel Spotbot will only let me use the Manual Mode, when I try to push "Set in Stain" or "Surface" stain the light won't turn on. My children were playing with it, but I don't know what they did. The Manual mode is still working. Any suggestions?


There is a small magnet in the end of the hose. Under the phillips screw and plastic cover. Mine rusted to bits and stopped tripping the switch. A bit of a super strong hard drive magnet siliconed back in the end of the hose and all was fine. ... Bissell SpotBot Robotic Wet/Dry Vacuum

Spotbot will not light up in handsfree mode, but works fine in manual (hose) mode


You may want to contact one of our Authorized Service Centers to have a quality technician inspect your machine.Here's a quick link to locating one. \015\012 ... Bissell SpotBot Robotic Wet/Dry Vacuum

Our Optimus CD-8100 disc changer is temperamental. Sometimes it will play, but not sure just how to program it. When we want it to play for a program in our chapel, it cannot be depended on. Seems like we have to play around with it to get it to play the disc and song we wish. If we had a manual to tell us just what to do should be helpful. The manual was not with the player when we were given it as a gift. Also if there is a remote, that did not come with it either. Would appreciate any hel


... Vacuums

I do not have my users manual and have never vacuumed wet with this vacuum. How do I change it from a dry to wet vacuum. Can't find my manual and I need to use the shop vac for water in basement, do I have to change the filter or what lost my user manual never used it to pick up water. need to know how to puit it in wet mode i want to clean the dirty water out of my pool.


\015\012Vacuuming Liquids\015\0121. When picking up small amounts of liquid\015\012the filter may be left in place.\015\0122. When picking up large amounts of liquid\015\012we recommend that the filter be\015\012r ... Craftsman 17765 Canister Wet/Dry Vacuum

I just got this euro pro shark steam mop. I dont have a manual for it so i dont know much about it. I put water in it and it heats up but when you start to use it. It makes a gurgling kind of sound and steam comes out, but not very much i dont think and on the floor you can't hardly tell where you went over the floor at cuz it's not very wet at all. So is it suppose to make a gurgling sound and should'nt the floor be alittle wetter?


Call Shark. They have good cust. support. ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Manual Mode doesn't work


OK, so I had the same problem. I had not used the manual mode in quite a very long time. Went to use the hose the other day and nothing. Blinking light and no noise. Came here for an answer and iceray123 is on the right track. On my bot, ... Bissell SpotBot Robotic Wet/Dry Vacuum

My hoover belt keeps burning when i replace it. i dont have the manual so i dont know what im doing wrong.


Probably when you close it back together, there is a piece rubbing against that you do not see right away but could maybe hear it. ... Hoover Vacuums

Need instruction manual for technics stereo components cassette mode rs-ch404, cd player model sl-ch515, tuner mode st-ch4505, amplifer se-ch515d


... Vacuums

Lost manual i have lost the manual for my vax 5130 so i dont know how to was carpets with it


I have just downloaded a manual for the VAX 5130 from here:http://www.manualnguide.com/dl/20364/ ... VAX Appliances 2000 Canister Vacuum

My Dyson vacuum works fine for cleaning the rug but the hose doesnt get any suction at all. I removed the hose and all the parts around it that I could and dont see any clogs or broken pieces. I lost my manual so I dont know if this is addressed, or if there is a switch Im not flipping. Gave it a thorough look but found nothing.


Hi there,Sorry to hear you're having a problem with your DC07. If you have suction through the cleaner head but not through the wand, it sounds as though you have a blockage. Although you say you've already checked for these, you may find ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Bissell SpotBot model 7887 still seems to clean ok, but there is no wastewater appearing in its tank on normal "Fresh Stain" and "Set-in Stain" settings. Seems to work on the "Manual" brush setting though.


... Bissell SpotBot Robotic Wet/Dry Vacuum

HI MY WIFE HAS A NECCHI SUPERNOVA AUTOMATIC SE DGE 3344 MODEL, BUT WE DONT HAVE A MANUAL FOR OPERATION, COULD YOU PLEASE PROVIDE TO US SOME REFERENCES ABOUT WHERE WE CAN GET THIS MANUAL ??? THANKS IN ADVANCE


... Vacuums

My spotbot leaks when i use the manual mode. the water / solution leaks from the automatic mode area.


... Bissell SpotBot Robotic Wet/Dry Vacuum

I completely took my Bissell 7901 steam heat apart to clean out the hose and i dont remember how it goes back.i dont need the manual it has nothing i need in it


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

I'm trying to find a manual for my weather genius EM3302A indoor/outdoor remote thermometer, purchased from XS Cargo. I need the manual to tell me how to change the clock from a 24 hour clock to the 12 hour am/pm clock. It was correct until my kids played with it and now I cannot find what sequence of buttons to push to get it back.


Weather Genius EM3302A Remote Weather StationOnce all settings are complete you press the UP button to toggle back and forth between the 24 hour clock and the 12 hour clock. ... Vacuums

Elna sewing machine manual for the 715 mode. would like to down load the manual


... Vacuums

Hey guys ! I have (or my wife has) A KENMORE whispertone 116. When my wife is cleaning with it it will suddenly stops.She then wiggles/pulls on the cord and it starts again and the stops.I pulled the cord all the way out and it is fine.So its inside.I dont relish the thought of playing with that reel but thats probably where the problem is (you think ??) My first challenge is how to seperate thw tp and bottem half peices???


It definitely sounds like the cord winder is the problem. I can tell you how to take the machine apart, but it's just about impossible to rebuild that winder. When you take the winder apart the spring blows apart, and it's very dangerous. I won't be ... Vacuums

Belts I have a bissell power steamer pro deluxe and I need to change the belt and I dont have a manual here with me to see how to do it. Please help. model # 8804 07266c


Http://newzealand.bissell.com/images/IncludeContent/Service_Center_Help/Upright_Deep_Cleaner_Repai ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum

I dont have the instruction manual for the bissell little green proheat, how do I use it?


You can download manuals from the Bissell website ... Bissell LITTLE green Compact Multi-Purpose Cleaner Vacuum

I need instruction on loading my machine to start cleanong the carpet i dont have the manual i have the bissell pro heat 2x steamer


Http://www.bissell.com/images/UserGuides/7950_1204.indd.pdf ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I am looking for a manual instruction step by step for assembling my kirby by mode G10 E


Here's a free guide for the shampooer and I have both DVD and book versions of the Sentria (G10) instruction manual. Hope this helps...\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

Cleaning solution does not come out of the rotating cleaning head or the hand-held nozzle the solution pump seems ok but does not run (electrical continuity check between the two leads on the pump show very low resistance so they seem to be intact) - no dirt or blockage is apparent (it is a very simple device with 1 moving part wires to the pump also pass a continuity check THERE IS NO VOLTAGE on the pump leads from the control circuit board when I turn on the "manual" cleaning mode - a


You can contact Bissell directly at the following\015\012\015\012For UK inquiries:\015\012Monday - Thursday 9 am — 5 pm\015\012Friday 9 am — 4 pm\015\012\015\012BISSELL Homecare (Overseas) Inc ... Bissell SpotBot Robotic Wet/Dry Vacuum

I have a 5.5 hp craftsman 20 litre wet Dry vacum . I have lost the manual. & have 2 questions 1) how do I change to wet vacum from dry? Also could i use the wet mode with some water in it and let it run while I am sanding dry wall to catch the dust in the water in the container? Thanks


# 1 myou just take the bag out make sure ytou sponge filter is in place athe top and turn it on the power switch just turns on ,machine ther is no wet dry switch just an empty bagless cannister is all you need make sure the ball outlet in vacumn is w ... Vacuums

Hi there I have a Shop.Vac QS800 57519-63 its about 6 years old. I don't have manual for it & want to know how I can use it in the wet mode Thanks for your help. Jasper


To use a shop vac to **** up water you just need to remove the filter element inside. open it up just as if you were going to empty out the dirt and on the top center you will see a filter. unscrew the retaining nut on the bottom and remove filter. ... Vacuums

Is there a manual for the Bissell Stain Lifter Brush model # 1716-R


Go to the bissel website and look for the manual there ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0573 seconds