Having problems with your Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum ?

Bissell Pet Hair Erase does not vacuum.

\015 Bissell Pet Hair Erase does not work right. When I adjust the vacuum height for carpet height the dirt just gets pushed around on the carpet. I've cleaned the filters and don't understand why a vacuum won't vacuum.\015

Answers :

It is because the belt is worn or stretched and needs to be replaced. Here are the belts you need and the manual which has instructions:

Bissell Pet Hair Eraser Belts and Manual
Hi, it's Jim from Crucial Vacuum.
\012
\012You may have a problem with your brush roll and belt. Unplug the vacuum and flip it over, is there a clog or any noticeable debris? If so try removing the clog and see if any suction returns to the vacuum. While you have the vacuum flipped over check to see if the belt is loose or damaged. This can be causing the brush roll to not pick up as effectively as it should be. If you're looking for any other regulatory maintenance please feel free to give us a visit.
\012
\012You can purchase direct from us for all replacement parts from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10
\012
\012For your convenience here is a link to our website where you can find a wide variety of Kenmore parts.
\012
\012http://www.crucialvacuum.com/kenmore.html?limit=all
\012
\012I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.
\012
\012Jim Thompson
\012Crucial Vacuum Customer Care
\012http://www.crucialvacuum.com
Repair Help & Product Troubleshooting for Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bissell Pet Hair Erase does not vacuum.


It is because the belt is worn or stretched and needs to be replaced. Here are the belts you need and the manual which has instructions:Bis ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Pet turboeraser tool not working - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Troubleshoot bissell pet hair eraser vacuum


... Bissell 3920 Bagless Upright Vacuum

Bissell Pet Hair Eraser Vacuum marking carpet


The brush is always turning on the machine even when your using the tools. try not to set it down on thick carpet , or if you can set it on the linoleum. ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

No suction and is not clogged - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


The motor is bad, when these type of electrical motors go bad the power of the vaccum dies but the motor can still sound like it is running. One way to tell the motor is shot, is the motor while running will be a might louder than it was originally. ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

How to replace the belt on a bissel 3920 - Bissell 3920 Cyclonic Pet Hair Eraser Vacuum


... Bissell 3920 Cyclonic Pet Hair Eraser Vacuum

I have to replace the power cord on my Bissell upright pet hair eraser vacuum because it is damaged from getting run over by the vacuum. Familiar story? Rather than pay a technician a lot of money, I feel I should be able to tackle this myself (went to college and everything). What are some pointers to help me bravely tackle this without the help of a male (no offense guys)?


Of course, its simple.\015\012Use electric tape to make sure the wires never touch, usually a phillips screwdriver will do to uncscrew the machine.\015\012just make sure you line up the cords the right way, positive to +ve and negative to ... Vacuums

Where is the beater bar? - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Making a loud jet engine sound - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


We had this problem also, the easy fix for us was taking out the soil container, then reach in and grab the gray cylinder and twist left to unlock it. pull it out, sometimes pet hair clogs the ports that make the cyclone action. Once you clean it o ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Change belt - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

I have a Bissell pet hair eraser model #3920. It's been working great until last night. I went to use it and the brush won't spin. It also smells like it's burning. I checked the belt and it looks fine, and the brush spins by hand easily. It's not clogged anywhere that I can see. Anyone have any other ideas? This vacuum is only 8 months old.


- Remove the access panel, which is on the bottom of the machine. There are 4 tabs to lift on the access panel to remove. Start with tab 1 then 2-4 tabs.- Check the brush, and belt for any damage. Clean off any debris on the brush. ... Bissell 3920 Bagless Upright Vacuum

Bissell pet hair eraser vacuum smells like smoke


... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

I can see the height adjuster under my Bissell pet hair eraser vacuum, but it doesn't adjust. The parts don't look like they're touching. It's been iffy since I took it out of the box. Now it doesn't adjust at all. Used only five times. Looks like I should be able to fix it myself. No local repair available. Could you help please?


Http://uk.bissell.com/images/UserGuides/3920E_508.pdf\015\012\015\012This is the pdf manual. If you look at page 12 you'll see that the bo ... Bissell Vacuums

How to change the belt - Bissell Pet Hair Eraser Bagless Vacuum


... Bissell Pet Hair Eraser Bagless Vacuum

My Bissell will not suck up pet hair or dirt - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

My Bissell will not **** up pet hair or dirt - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


Hello,\015\012Dirt hair and such will build up in the hoses of that vacum. Take them apart stretch them out and run something through them to make sure they are clean. \015\012The other problem is the filter in the bottom of the cup. At l ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Bissel Pet Hair Eraser spits out dirt and dog hair when using hose tools..all filters have been claen and emptied. Dirt is being spit out of the "hose wand base" where the hose is detached to add the tools.


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Bissel pet turbo eraser not working - Bissell 6595 Lift Off Bagless Upright Vacuum


... Bissell 6595 Lift Off Bagless Upright Vacuum

For a Bissell Pet Hair Eraser the drive belt recommended is a size 8... is this right? It seems VERY small and difficult to replace.


No it does not use the style 8 belt. It uses the style 7/9/10/12/14/16 belt. You can view the manual and buy the belt here:http://www.vacbe ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

My bissell pet hair eraser won't turn on. the clean filter indicator is red but the filters are clean and the hose is not plugged.


... Vacuums

Need a user's manual for bissell pet hair eraser vacumn model 3920


You can get the manual on the link below.\015\012\015\012http://img.meijer.com/assets/product_files/pdf/1001371_3920_manual.p ... Vacuums

I have a bissell vacuum model 3760-2 and it smells terrible when it is in use (like wet pet hair). I have emptied and washed the main collection "tank" and unscrewed the filter and washed the flexible filter but it still smell horrible. Any suggestions?


The filter if its dirty in gives bad smell.Also if it gets worn out or very old it gives bad smell.Many other users too have noticed this bad smell.Replacing the filter helped many other users too.\015\012The worst part being smell of the filte ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Won't turn on. clean filter indicator is red but filters are clean and hose is not clogged.this is a bissell pet hair eraser.


Repair shop :( ... Vacuums

Last time I used my Bissell Pet Hair Remover vacuum it smelled like something was burning and it left a black mark on the carpet. What should I do?


When you smell burning like that it usually indicates that the belt is worn and slipping on the motor shaft. You probably need to change the belt. You can get the belts for your model here: ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Hair gets stuck in upper filter basket instead of going into the lower basket that you are supposed to empty. It is a Bissell 37604 Lift-Off Revolution Pet Bagless Upright Vacuum Cleaner


Check both filters. If one or other is increasingly dirty, wash or clean it out. Also check the air waves leading to the bagless bin canister part. If one air way is blocked the remaining dirt will try and access the bin other way due to the natural ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1073 seconds