Having problems with your Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum ?

Making a loud jet engine sound - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


Answers :

We had this problem also, the easy fix for us was taking out the soil container, then reach in and grab the gray cylinder and twist left to unlock it. pull it out, sometimes pet hair clogs the ports that make the cyclone action. Once you clean it out, put it back in and twist to lock position. There is a little lock/unlock indicator on that gray cylinder. Hope this helps, it fixed our "jet engine."
This is a fan first system you have broken the fan that is part of the motor and creates suction.
Repair Help & Product Troubleshooting for Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Making a loud jet engine sound - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


We had this problem also, the easy fix for us was taking out the soil container, then reach in and grab the gray cylinder and twist left to unlock it. pull it out, sometimes pet hair clogs the ports that make the cyclone action. Once you clean it o ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Pet turboeraser tool not working - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Where is the beater bar? - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

I have to replace the power cord on my Bissell upright pet hair eraser vacuum because it is damaged from getting run over by the vacuum. Familiar story? Rather than pay a technician a lot of money, I feel I should be able to tackle this myself (went to college and everything). What are some pointers to help me bravely tackle this without the help of a male (no offense guys)?


Of course, its simple.\015\012Use electric tape to make sure the wires never touch, usually a phillips screwdriver will do to uncscrew the machine.\015\012just make sure you line up the cords the right way, positive to +ve and negative to ... Vacuums

No suction and is not clogged - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


The motor is bad, when these type of electrical motors go bad the power of the vaccum dies but the motor can still sound like it is running. One way to tell the motor is shot, is the motor while running will be a might louder than it was originally. ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Change belt - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Bissell Pet Hair Erase does not vacuum.


It is because the belt is worn or stretched and needs to be replaced. Here are the belts you need and the manual which has instructions:Bis ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

My Bissell will not **** up pet hair or dirt - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


Hello,\015\012Dirt hair and such will build up in the hoses of that vacum. Take them apart stretch them out and run something through them to make sure they are clean. \015\012The other problem is the filter in the bottom of the cup. At l ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

My Bissell will not suck up pet hair or dirt - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Troubleshoot bissell pet hair eraser vacuum


... Bissell 3920 Bagless Upright Vacuum

Bissell Pet Hair Eraser Vacuum marking carpet


The brush is always turning on the machine even when your using the tools. try not to set it down on thick carpet , or if you can set it on the linoleum. ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

How to replace the belt on a bissel 3920 - Bissell 3920 Cyclonic Pet Hair Eraser Vacuum


... Bissell 3920 Cyclonic Pet Hair Eraser Vacuum

Bissel pet turbo eraser not working - Bissell 6595 Lift Off Bagless Upright Vacuum


... Bissell 6595 Lift Off Bagless Upright Vacuum

My Bissell Powertrak Cyclonic Vacuum has started running REALLY loud! I have cleaned the filters, checked for any clogs in the hoses and replaced the belt, but it stull sounds like a jet plane! Could it be the motor? Any suggestions!?


... Bissell 6594 PowerForce Bagless Upright Vacuum

Hair gets stuck in upper filter basket instead of going into the lower basket that you are supposed to empty. It is a Bissell 37604 Lift-Off Revolution Pet Bagless Upright Vacuum Cleaner


Check both filters. If one or other is increasingly dirty, wash or clean it out. Also check the air waves leading to the bagless bin canister part. If one air way is blocked the remaining dirt will try and access the bin other way due to the natural ... Vacuums

HI I have a Bissell Pet Hair Eraser it has a very loud high pitched squeal, I have removed the belt & cleaned it with no effect. Is there something else I cn do? Thanks Joe


The belt may be stretched out and therefore, no good. You can try roughing up the surfaces the belt rides in with some 150 grit sandpaper. That may do the trick ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

I have a Bissell pet hair eraser model #3920. It's been working great until last night. I went to use it and the brush won't spin. It also smells like it's burning. I checked the belt and it looks fine, and the brush spins by hand easily. It's not clogged anywhere that I can see. Anyone have any other ideas? This vacuum is only 8 months old.


- Remove the access panel, which is on the bottom of the machine. There are 4 tabs to lift on the access panel to remove. Start with tab 1 then 2-4 tabs.- Check the brush, and belt for any damage. Clean off any debris on the brush. ... Bissell 3920 Bagless Upright Vacuum

Bissell pet hair eraser vacuum smells like smoke


... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

I can see the height adjuster under my Bissell pet hair eraser vacuum, but it doesn't adjust. The parts don't look like they're touching. It's been iffy since I took it out of the box. Now it doesn't adjust at all. Used only five times. Looks like I should be able to fix it myself. No local repair available. Could you help please?


Http://uk.bissell.com/images/UserGuides/3920E_508.pdf\015\012\015\012This is the pdf manual. If you look at page 12 you'll see that the bo ... Bissell Vacuums

How to change the belt - Bissell Pet Hair Eraser Bagless Vacuum


... Bissell Pet Hair Eraser Bagless Vacuum

My Bissell sounds like a jet plane! Extremely loud!


... Bissell CleanView 3596 Bagless Upright Vacuum

I have a Dyson vacuum cleaner ...upright....all of a sudden my vacuum started making this awful sound...like a loud buzz...but only when I have it on carpet....when I have it on "floor" mode it's fine....sometimes(although seldom) it has worked without buzzing...and it's LOUD!!....I have only had this vacuum for a year....and no...I have never picked up any coins or hard stuff.only use it for 2 rooms.the rest of the house is wood floors.......what shall I do? Thanks......Gloria


It may just be, that on carbet the brushes make noise that you dont hear on woodfloors.\015\012If there is a hights adjustment, set it higher for shaggy carpet and lower for berber. ... Vacuums

Bissell vacuum making loud noise - Bissell 6594 PowerForce Bagless Upright Vacuum


... Bissell 6594 PowerForce Bagless Upright Vacuum

My pet hair eraser smells like it is burning all the time and sounds funny. The brush will not spin once you have it on the carpet unless you hold it up a little while you are cleaning but then the whole vaccume is not on the floor. I have cleaned all filters and all and it does the same thing. My sister has the same machine because I raved at how wonderful this thing was for pet hair and mine has not worked right since it was about a year old and hers has had the same exact problem since it was


We had the same problem, and it turned out that the roller wheel height setting had broken, for no apparent reason, and was "floppy" so we had to lock it in to one setting with epoxy. Limits utility, but it works. Sort of. ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

I have an older Oreck XL vacuum that sounds like it is running twice as fast as it should. I disassembled the entire vacuum, including disconnecting the motor wires, to clean out the hair, string, and other things. When I put everything back and connected all the wires, everything appears to work, including the light. The only problem is, it sounds extremely loud like the motor is running too fast. The model number is: XL3610HH Ser. No. 3610HHXA039740-6 I do not have as electrical diagram to see


... Oreck XL Ultra Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1599 seconds