Having problems with your Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum ?

No suction and is not clogged - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


Answers :

The motor is bad, when these type of electrical motors go bad the power of the vaccum dies but the motor can still sound like it is running. One way to tell the motor is shot, is the motor while running will be a might louder than it was originally.
Repair Help & Product Troubleshooting for Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No suction and is not clogged - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


The motor is bad, when these type of electrical motors go bad the power of the vaccum dies but the motor can still sound like it is running. One way to tell the motor is shot, is the motor while running will be a might louder than it was originally. ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Pet turboeraser tool not working - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Making a loud jet engine sound - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


We had this problem also, the easy fix for us was taking out the soil container, then reach in and grab the gray cylinder and twist left to unlock it. pull it out, sometimes pet hair clogs the ports that make the cyclone action. Once you clean it o ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Change belt - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Where is the beater bar? - Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum


... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

I have to replace the power cord on my Bissell upright pet hair eraser vacuum because it is damaged from getting run over by the vacuum. Familiar story? Rather than pay a technician a lot of money, I feel I should be able to tackle this myself (went to college and everything). What are some pointers to help me bravely tackle this without the help of a male (no offense guys)?


Of course, its simple.\015\012Use electric tape to make sure the wires never touch, usually a phillips screwdriver will do to uncscrew the machine.\015\012just make sure you line up the cords the right way, positive to +ve and negative to ... Vacuums

I have a Bissell pet hair eraser model #3920. It's been working great until last night. I went to use it and the brush won't spin. It also smells like it's burning. I checked the belt and it looks fine, and the brush spins by hand easily. It's not clogged anywhere that I can see. Anyone have any other ideas? This vacuum is only 8 months old.


- Remove the access panel, which is on the bottom of the machine. There are 4 tabs to lift on the access panel to remove. Start with tab 1 then 2-4 tabs.- Check the brush, and belt for any damage. Clean off any debris on the brush. ... Bissell 3920 Bagless Upright Vacuum

Bissell 37604 Bagless Upright Vacuum. Hose keeps clogging every time I vacuum. Is there a way to prevent this? I am ready to buy a new vacuum, but it does do a great job picking up hair...until it clogs. It clogs at top of hose. Could the hose be kinked? It does not look like it.


That is a defect in the design of that style of vacuum. I went back to my old vac because I got so tired of having to unstop it. The sharp turns in the hose and the molded plastic causes it. Find one without the turns. ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Bissell Pet Hair Erase does not vacuum.


It is because the belt is worn or stretched and needs to be replaced. Here are the belts you need and the manual which has instructions:Bis ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

My Bissell will not suck up pet hair or dirt - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

My Bissell will not **** up pet hair or dirt - Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum


Hello,\015\012Dirt hair and such will build up in the hoses of that vacum. Take them apart stretch them out and run something through them to make sure they are clean. \015\012The other problem is the filter in the bottom of the cup. At l ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Troubleshoot bissell pet hair eraser vacuum


... Bissell 3920 Bagless Upright Vacuum

Bissell Pet Hair Eraser Vacuum marking carpet


The brush is always turning on the machine even when your using the tools. try not to set it down on thick carpet , or if you can set it on the linoleum. ... Bissell Upright Vacuum - The Pet Hair Eraser 1 ea Vacuum

Loss of suction on a bissell proheat pet - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Beater bar suction bissell pet - Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum


... Bissell 3594 CleanView PowerTrak Bagless Upright Vacuum

No suction I have an upright bissel 120v vacuum that has no clogs and a lot of air from sides where vent located but no suction.


... Bissell 3545 PowerGlide Bagged Upright Vacuum

I have the Dyson animal upright vacuum. It's 2 years old and now it just isn't working as well as it once did. Suction seems to be lacking - it's not picking up pet hair or much else from the carpet. I have to go over the spot for a few minutes and still, the hair isn't picked up.


You might want to check and see if your cyclones are plugged with hair. this can happen and there is a great site to disassemble and clean the cyclone here: http://www.exonotes.com/content/node/4 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

How to replace the belt on a bissel 3920 - Bissell 3920 Cyclonic Pet Hair Eraser Vacuum


... Bissell 3920 Cyclonic Pet Hair Eraser Vacuum

Bissel pet turbo eraser not working - Bissell 6595 Lift Off Bagless Upright Vacuum


... Bissell 6595 Lift Off Bagless Upright Vacuum

My upright vacuum has started to leave a line of pet hairs when I vacuum, the suction from the hose seem fine.


Try looking at the roller ,right at the back of roller ,turn it off and get something like a tooth brush or bottle brush to clean at back of roller ... Electrolux Vacuums

No suction using extension hose for Bissell Bagless Upright vacuum. i checked for clogs and found nothing. shannon


Check the sole plate where the beater bar is. You may have to remove the roller brush flap to get into the roller brush and then check the main dust channel beside it. Usually if there's no suction on the hose it means that:\015\012\015\0121) T ... Bissell CleanView II Plus Upright Bagless VacuumVacuum

Bissell pet hair eraser-the brush is not rotating but the suction is working on the removable parts


That means that you need to replace the belt. Here is the belt you need and a manual you can view which has instructions:Bissell Pet Hair E ... Vacuums

Bissell pet hair eraser vacuum smells like smoke


... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Bissell 35962 Cleanview Bagless Revolution Upright Vacuum hose is clogged with sock where hose meets handle attachment. Attempted to use broom handle to push back through suction opening. Sock is compacted. Any home repair advice?


If you have access to a small sink "snake" used to clear clogs in sinks, you might be able to use it to "snag" the sock and pull it out.\015\012Needs to be a metal sewer snake so that you can tug on it if and when it snags the sock. ... Bissell 35962 Cleanview Bagless Revolution UprightVacuum

How to change the belt - Bissell Pet Hair Eraser Bagless Vacuum


... Bissell Pet Hair Eraser Bagless Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1011 seconds