Having problems with your Bosch Vacuums ?

Drive belt on upright bagless cleaner

\015 Where oes the replacement drivebelt go on my cleaner? I didnt take the broken one off and I cant find how to fit the new one!\015

Answers :

If its like mine there is a rod that comes out f the moter usually on the upper left of the power head put t the belt around that and then slip the belt over the beater bar. Then replace the beater bar. You will have to pull a little to stretch the belt.
Usually the drive belt can be put on by taking off the sole plate on the base of the vacuum. If you turn it around you may be able to find a series of screws which will help you. However Bosch bagless upright series is the same as the Vax VX-1 and you can download a manual here:\015\012\015\012\015\012
\015\012http://www.vax.co.uk/support/support.php?result=62
\015\012
\015\012This model has a protected brush though so the belt on it may just have slipped off. Either that or the button to turn off the brush at the top of the handle has been switched off or may be broken. \015\012
\015\012Dont forget to rate!
Repair Help & Product Troubleshooting for Bosch Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Zanussi 1700W bagless upright vacuum cleaner which keeps cutting out after about 5/10 mins use. I had to replace the rubber drive belt which snapped not long after purchasing and it was fine for a while, but now its just keeps cutting out after a small amount of use. Nothing wrong with belt which is still intact so we don't know what the problem is. It's a great cleaner otherwise - but it's driving us mad!! Please help!


... Vacuums

Drive belt on upright bagless cleaner


If its like mine there is a rod that comes out f the moter usually on the upper left of the power head put t the belt around that and then slip the belt over the beater bar. Then replace the beater bar. You will have to pull a little to stretch ... Bosch Vacuums

Hello. I have an electrolux glider upright bagless vacuum cleaner (UK model) who's brushes do not rotate any more. I'm guessing that I need to replace the drive belt but I have no idea where to start. I would appreciate any tips. thanks


Hello! There are two solutions to this as the Glider model you speak of could be the more old fashioned type where screws on the bottom foot plate (ie where the spinning brush sits) have to be undone in order to get to the drive belt.\015\012 ... Electrolux Vacuums

We have a Hoover upright vacuum cleaner, model Core 7. There is a switch that turns on and off the brush drive. This operates via a cam with a bearing putting pressure on the final drive belt to engage the brush head. My brush head is not turning and with the lever set to engage the drive there is still considerable slack in the final drive belt. There appears to be only a bearing deflecting the belt, should there be a pully or other device mounted on this bearing? There is so much slack a


Yes, there should have been a white plastic sprocket on top of the bearing - in its channel the belt would sit. Unfortunately no parts are available for this unit that can be bought retail - only available by order to dealer repair shops.\012\012\012 ... Hoover Vacuums

I have the Bissell upright cleanview bagless vacuum cleaner. My belt broke and someone else took it off. I bought a new belt but do not know where it goes on the cleaner. Please help


Easy to do. Unplug the vac. Turn the vacuum over and look for three finger latches on the bottom behind the brushes. Unlatch these and pull the faceplate off. Then, grab one side of the brush and pull straight up (they just sit in grooves on the ... Bissell CleanView 3596 Bagless Upright Vacuum

Is there a diagram/picture to help me visualize how to put cleaner belt back in vacuum? I was taking base of vacuum apart so I could get rid of hair that were wrapped on the roller. The cleaner belt came to loose and I could not figure how to fix it back. the model is eureka upright bagless series 430


Hi,Sorry to hear your belt fell out. Not good if you've never replaced a belt before...Here is a website where you can read a detailed description of how to change a belt: http://www.ehow.com/how_8034505_eureka-belt-replacemen ... Eureka 431A Optima Bagless Upright Vacuum

VAX UPRIGHT VACUUM CLEANER V91-P2/HOW TO REMOVE TOP COVER TO REPLACE DRIVE BELT.


... Vacuums

I replaced the agitator bar drive belt on a Hoover Model U6432-900 upright vacuum cleaner, but it just slips when the drive wheel is spinning. Is there an adjustment I need to make? I don't see any adjustment spots.


You probably should have replaced the flat belt(38528035) also. But the drive belt has a idler wheel(#13) to engage it, is it riding on the belt, if not if may have jammed to one side and able to spring up against the V belt. It could have broke al ... Vacuums

I need to replace drive belt on dyson dc17 - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Here is a link to the belt you need and a manual you can view which has instructions: Dyson DC17 Belt and Manual ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Installing new belt - Panasonic Mc-Ul594 Eco Max - Bagless Upright Cleaner


+++++++++++++++++++++++++++++++++++++++++\012\011+>> Unplug the mains lead from electrical socket <<+\012\011+++++++++++++++++++++++++++++++++++++++++\012\012\012\011\342\200\242 Turn cleaner over in flat position.\012\01 ... Panasonic Mc-Ul594 Eco Max - Bagless Upright Cleaner

How do I change the belt on a vacuum cleaner - Shark Helmet NV22L Shark Navigator Upright Bagless Vacuum


You don't. Call cust. service, they sound send a new head. ... Shark Helmet NV22L Shark Navigator Upright Bagless Vacuum

How to fit a new drive belt - Dyson DC07 Bagless Upright Cyclonic Vacuum


Hi,\015\012\015\012There are different models of DC07 and the guide below is for the "standard" model. There are some slight variations on different DC07 models, but this should be more or less the same for all of them.\015\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do i replace the drive belt? - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Here is a link where you can view the manual which has instructions:Dyson DC14 Manual ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How to replace main drive belt on dyson dc03 - Dyson DCO3 Absolute Bagless Upright Cyclonic Vacuum


... Dyson DCO3 Absolute Bagless Upright Cyclonic Vacuum

Does it have drive belt - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

How to change belt in hoover core 3 upright bagless vacuum cleaner


... Vacuums

How to replace drive belt on a Dyson DCO7 - Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum


... Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum

Replace the belt in a dyson DC33 vaccum - Dyson DC33 Multi-Floor Upright Bagless Vacuum Cleaner


... Dyson DC33 Multi-Floor Upright Bagless Vacuum Cleaner

Replacing clutch drive belt dyson dc14 - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum


Chris,\015\012I am just trying to find an owners manual, but I can not find one anywhere. Your link did not work. Can you help with another link? ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Removal of drive belt on dc 07 full kit - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I require a new drive belt for my upright vacuum cleaner


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=698244\015\012Generic problem for all Vacuums\015\012I require a new drive\015\012Posted by martiy on J ... Vacuums

Belt drive Not only do I need a PN for the drive belt on the Panasonic MC-V7395 Vacuum Cleaner, I've noticed that there are problems with the belt breaking. Can someone also explain the proper way to install the belt over and around the motor spindles and any other information that may help. Thank you.


Http://www.partstore.com/Model/Matsushita/Panasonic/MCV7395.aspx?SearchTerm=True ... Panasonic MC-V7395 Vacuum

Bissell Power Track Cyclonic Upright Bagless Vacuum.. ..The spin brush works laying down....when upright it won't spin! I cleaned any and all hair from the roller....belt is not broken....but do I need a new belt though? The vac is a few years old bever replaced the belt yet.


You need a new belt. ... Vacuums

Panasonic mc-e4113 Upright vacuum. The belt that drives the brush in front is broken I have found a spare for this but there seems to be a pulley missing on the main drive shaft that the belt needs to fit on. I can't believe that there wouldn't be one? Can anyone tell me if this is the case and if so where I can get one from. Many thanks Sean


... Panasonic Vacuums

I need instructions on replacing the belt that drives the brushes on a Bissell powersteamer pro deluxe carpet cleaner. Could the broken belt have anything to do with the suction of the cleaner?


Here is a link to the belts you need and a link to the manual:Bissell 1697-7 Manual and Replacement Belts ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0956 seconds