Having problems with your Conair Vacuums ?

Send me a manual of operation for the Conair HC100GB Simple Cut 12 Piece Hair Clipper


Answers :

You can get the manual on the link below.
\015\012
\015\012http://www.conair.com/cnt_ib.php?action=download&id=140
\015\012
\015\012Good Luck
Repair Help & Product Troubleshooting for Conair Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Send me a manual of operation for the Conair HC100GB Simple Cut 12 Piece Hair Clipper


You can get the manual on the link below.\015\012\015\012http://www.conair.com/cnt_ib.php?action=download&id=140\015\012\015 ... Conair Vacuums

I took the cover off the brush so I could cut off all the hair that was wrapped around it (vacuum was working fine, I just noticed the hair). I pulled the brush/spinner thing off one side, cleaned everything, popped it back in where it belonged, and tried to make sure the belt was in the proper alignment. However, when I turned the vacuum on, it makes a horrible noise like I'm sucking up rocks. What have I done wrong in putting it back together? It seemed simple...


The ends of the brush roller have to go in in a certain position.each end has a different look.make sure the match up to the seats on the roller guides and make sure the belt is centered.the belt will center itself by turning the roller by hand in on ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

I have a Panasonic MCE6003 vacuum cleaner. I regretfully leant it to a neighbour and it came back full of dog hair and keeps cutting out. I cleaned out the dust container and the main filter but it still kept cutting out after 5 minutes. I decided to unscrew the part with the motor and wash the filter inside.It was all going well until a large rubber washer bit, a piece that looks like the thermostat and a little white button attached to two black wires fell out and now I have no idea how to put


... Panasonic Vacuums

The TechDrive Pedal on my Kirby G6 fell out of the back of my vacuum cleaner. I removed the screws from the metal plate one the bottom to try to see if something had come a loose. Can you send me a diagram so I can put it back together or tell me where I can get a service manual. The only part I am having trouble with is the metal piece inside that engages the power drive. Thank you.


The pedal drive fell out . Do you have a manual telling me how to get it together again.. Thanks, Dianne ... Kirby G6 Bagged Upright Vacuum

Farberware Digital Convection Rotisserie Oven I need the manual to operate. can you send me a pdf file?


... Vacuums

A friend gave me her Shark cordless speed vac. I do not have the manual. Could you please send me the operating instructions. - how to use and empty. The model is SV749C. Thank you, Tia


... Vacuums

Operating manual i have lost my operating manual for my bissell Model #9500 proheat x2 cleaner. where can i get another manual? on one of the sites it shows that i can download the manual but for some reason i can not down load it. can you please help me with this problem?


BISSELL User's Guides can be downloaded at www.bissell.com\015\012On the front page under Customer Service click on User's Guides and enter the model number of your unit.\015\012User Guide will be displayed as a PDF file. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Operating manual I upgraded my vacuum to the new DC41 Ball, and gave my mother the other DC41 - bought in 2008 - and I don't have the operating manual for it anymore. She needs it. Where can I get the PDF manual? The link for the previous person requesting goes to the manual for the ball. Thanks!!!


... Vacuums

Last night as I was vacuuming, I noticed that the belt stop indicator light was on. I pulled out the hair that had gotten tangled around the brush in hopes of solving the problem. It didn't change things. I then unscrewed the entire bottom piece to take out the brush roller. I removed hair from the end piece of the brush roller and reattached the belt; however, I cannot figure out where the microchip is supposed to go so that I can reassemble the base piece by screwing it back together. It seems


Not sure what you mean when you refer to a "microchip" but maybe it is a sensor that works with the belt.\015\012Anyway, if you Google the make and model number of your vacuum you can probably get an exploded view or owners manual that might indicate ... Vacuums

My Andis Easy Clip does not cut the hair very good any more. I greased/ sprayed the blade even bought a new blade but it only cuts for a couple of dogs and then just pulles the hair rather then cut it.


U might need a new belt check it out ... Vacuums

Operating manual Own a new Durabrand cyclonic vacuum cleaner new. No operating manual in box Can you help


I have a DB9191-D, but assume it will be similar. Emptying stumped me for a while, too - but in the end it was as simple as removing the end unit using the catch, and then sticking my hand inside the filter hole in the middle and pulling the whole in ... Vacuums

Lost operation manual for my Roomba 2.1 in our recent move. Item was purchased in Aug 2007 at Costco. Where can I get a replacemnet operation manual through a free download? Thanks in advance for your assistance.


... Vacuums

Manual issues Have reciently purchased a kirby from ebay (gotta love ebay) but has no manual. I believe the model is a heritage (cant see a II though) Do they all have roughly the same manuals??? I have all the attactments - spray painter, hair trimmer, turbo brush etc but really want to get the most from the machine. Where do I get manuals for machines that are 20yo???!!!


Many years ago I was a service engineer for these machines in England they were actually made by a company called Scott &Fetzer in the USA and Branded KIRBY or CIMEX.\015\012\015\012See if Scott &Fetzer are still around and ask th ... Kirby Heritage II Vacuum

Bissell powersteamer i have a bissell powersteamer my aunt gave me, but do not know how to operate it to put the water and cleaning solution in it. please let me know how to operate. or how can i get the operation guide or manual


BISSELL User's Guides can be downloaded at www.bissell.com\012On the front page under Customer Service click on User's Guides and enter the model number of your unit.\012User Guide will be displayed as a PDF file. ... Bissell 8806 Powersteamer Upright Vacuum

I have a Dyson DC-17 and the top of the cyclone has hair and other debris jammed in the ports. It has 6 six screws holding the parts together and I can only get access to 4 of the screws. The bottom piece appears to be removable, but I can't figure out how to remove it without damaging it. If I can get this piece off, then I have access to the other 2 screws. Can you tell me how to remove the bottom piece? Thanks in advance.


The instructions on how to dis-assemble your DC-17 are somewhat lengthy and it is quite helpful to have pictures and videos handy while you are doing it. Normally I would give the instructions here, but due to the amount of info that is necessary to ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Have new oreck quest canister and having trouble figuring out how to change vacuum bag. I have the plastic piece that you attach bag to, but don't know where the piece fits into the vacuum. looking for a diagram or manual to see where to install the plastic piece


... Oreck Vacuums

I have the Janome 6600 P. Beginning a seam the thread knotted and the machine made noise and needle would not move either up or down. I manually moved the needle using the handwheel and cut away the knotted thread. I began sewing again but instead of starting at the edge began about a half inch down, forward stitched, reversed to lock threads and problem repeated and received the message to "Stop for safety purposes". Did that. Referred to the manual, tried manual recommendation. Did not work. I


... Vacuums

Need an operating manual for Sewing Machine Singer Merritt 4538, I do have Parts Manual, only need Instruction Manual., thank you much.! Marina L.


These guys sell it for $10 and $3 shipping or you can get a PDF version all the same price.\015\012\015\012http://www.sewingmanuals. ... Vacuums

Operating manual.. need to download the users manual. can you help?


Need to down load a user manual for my Kirby Heritage II ... Kirby Heritage II Vacuum

No suction Just received my refurb. dyson animal bagless. Finally figured out how to get it all together, turned it on and there is no suction coming up thru the beater bar. The hair is just collecting around the bar and not going up into the canister. It appears all the suction is going thru the open red end of the attachment hose, which has a vented cover piece. Am I missing a piece or is there a switch to turn of the attachment suction?


So the red hose isn't connected to a part on the vaccum so like it is connected to the connester but not to an opening just above the beater bar, this is the only idea i can supply you with. good luck, maybe i got lucky and helped you out. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I broke the handle part of the shark steamer #53101. I don't have the book to try to tell you the parts I need. Can you send me a picture or a copy of the steamer. It is purple. The above number may not be the correct one. It is broken in the center part. It has a little small circular piece that joins the two pieces which are broken. The beginning of the handle at the bottom of the steamer and the next session which has the steam release. The top of the handle is okay . It the middle and bottom


Hi,Ann there are very few parts for these...Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I purchased a Rival steamer Modle# fsd201 today, because it was the last one in the store, and it was the display modle. I got no operating instructions with it. Could you please send me some on e-mail, I can download them onto my printer, and therefore have operating instructions. Thankyou. [email protected]


Hello, I'll be sending you the copy of the user manual of Rival Steamer FSD201. Please check your email attachment.Kind regards, Firesnake09 ... Vacuums

I am looking for a model 1631 Bissell Power Steamer guide or owners manual. I have the machine, but I believe it is missing a hose, but I have no way of knowing without the operators manual. Can you help?


Follow the link below to access the User's Guide.\015\012http://www.bissell.com/searchresul ... Bissell Vacuums

Got a black & decker slow cooker model sl6470c without operating manual can i receive user manual online


... Vacuums

Kirby manual can someone send me or give me a link to a manual for a Kirby Heritage ll.


See it HERE it is Generations manual but this is pretty much the same. Only that your Kirby does not have transmission...Rocky ... Kirby Heritage II Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0553 seconds