Having problems with your Dewalt DC500 Canister Wet/Dry Vacuum ?

Dewalt dc500 won't **** in water

\015 My wet/dry vac won't **** in or blow out anything. I tried rinsing the filter and putting water thru the hose for blockage.\015

Answers :

My filter got waterlogged and I had to let it dry out before it would work again. I found I need to let it dry after I use it.
There is a float ball or reed that closes off the exhaust port inside the canister, to prevent water from filling too high when used as awet vac. If lodged or trapped it will prevent suction or discharge in wet and dry modes. look at the housing that the filter attaches to and you will see it. if it doesnt rattle when you shake the unit up and down, it is stuck; otherwise, you must not be spinning the fan blades.
Repair Help & Product Troubleshooting for Dewalt DC500 Canister Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dewalt dc500 won't **** in water


My filter got waterlogged and I had to let it dry out before it would work again. I found I need to let it dry after I use it. ... Dewalt DC500 Canister Wet/Dry Vacuum

My Dewalt dc500 wet/dry vac won't **** anything up, I’ve put a piece of wire to not the float ball from moving them it work fine but if I remove the wire I stop working the float ball moves to the top like it is full of water? Can you please help?


... Dewalt DC500 Canister Wet/Dry Vacuum

Pickup water wont pickup the water after putting it down very little comes up into the tank .it worked fine when we baught it but after not useing it for some time it worked now it wont **** water up at all can anybody help.


The clear shroud covering the front of "hood" has two sheet metal type screws at the bottom in front of the brushes, these two screws also hold the little straight brushes ( one on each side) in place. I found one of these screws had broken it's plas ... Hoover F6020-900 SteamVac Upright Vacuum

I have a george wet and dry (A26A), it wont pick up any water. the tube which goes from th lid into the water wont pick up water?


... Vacuums

My machine wont pick up the dirty water. If I take the cover off the recovery tank there is a lot of suction but it wont **** up the water. my carpet is soaked. What can I do


At power head clean out area before power head also look for small hose and clean out and look at rollers,i hope this works if you have directions still they should be able to help you out some more.thanks ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Hello good afternoon, i have a Royal Sovereign water dispenser with a little fridge on the bottom part and the problem i am having is that the dispenser wont release cold water and the fridge wont cool either. i would like to know is there any thing i can buy to fix it or do i have to buy a brand new dispenser! Thank you for your time!!


... Vacuums

My steamvac wont pick up the water. it is spinning and blowing out the water, but it wont **** it back in


The most common reason for lack of pick-up is that the lid is not seated firmly on the recovery tank. Lack of pick up is always caused by an air leak. A less common possibility is that the large round rubber seal that the recovery tank sits on has fa ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Water comes out when trigger is squeeze but wont **** up dirty water


A. Is your floor/hose knob in the correct position?\015\012B. Do you have suction at the hose end, when in that position?\015\012C. If you answered yes, no in that order then either your motor (provides the suction) is going bad, or it si ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Shampooer not sucking up water- water is spraying out and the hand tool is working but the main body wont **** up and water


Change the selector from hand tool to floor cleaner ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell 8920 wont spray any water/ solution except when in water


It sounds like you have a clogged line, if your mechanically inclined you can fix this yourself by tearing the unit apart. If you open the unit up, disconnect the lines on your pump and blow an air compressor through them. certain lines require you ... Bissell 8910 ProHeat Clear View Upright Vacuum

My bissel proheat 2x wont pick up the water


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Hoover steam cleaner wont pickup water


In the front on top the cover that curves down to the floor is where the suction is .it should be plastic you can see into.its probably clogged with hair and dirt.you need tro take that top off and it comes apart in two sections .the middle seperates ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a Bissell Proheat 2x cleaner which has worked perfectly on every occasion. Today I filled the machine as usual with water and formula and switched on, the motor ran, the lights were on and the brushes rotated but upon pressing the spray trigger no water or formula was released. I have cleaned the jets underneath and also followed instructions to release any airlock. It still wont release the water/formula. What else can I do? Thanks Charles


Please check the following with liquid in both tanks.\015\012 \015\012- Check to see if the machine will spray through the hose with the setting on tools. If it does, the pump is fine. Continue troubleshooting.\015\012- ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Brushes wont turn and wont spray water - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum


... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I have a bissell pro heat and it wont dispense water. the little red thing wont spin and it looks like the belt doesn't move. within a few minutes you smell it getting hot.


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I have a old Bissell SC 1632 wet vac. and the water pump turns on i can hear it. but it wont pump the water from the tank. the lines are clear. please help. it's my moms.


... Bissell Vacuums

My steam cleaner wont pick up water i have checked everything and its fine but still isnt sucking up water


Well Sexy mama ..are there any on~board screens that require clearing? Pet hair clogging up vac wand end? Is there vacuum power for attachment hose? Also, check that the wand /attachment switch is to vacuum and not set for attachments. Good luck ! ... Bissell LiftOff Revolution Pet Vac 37602 Vacuum

Wont spray i have the machine connected correctly but it wont spray water?


Did you press the trigger? If so, does it make any noise or does it not respond at all? If it does make noise, but won't spray, it could be a clog. Go to the vac shop to have it removed if you don't know how to take it apart yourself (I wouldn't risk ... Rainbow E series Canister Wet/Dry Vacuum

My Bissell Pro-Heat 2x 12 amps Model 9200-2 The rollers wont turn and the water wont release


WON'T SPRAY ??? ... Bissell 9200 Upright Vacuum

The water wont circulate it wont come out


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Need help My Bissell wont pick up any water and all it does it releases water from it. What should i do?


There is a rubber gasket that sits between the tank lip and the clear nozzle window. Part #2104052, also the the filter on the under side of the lid is clogged.\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\0122104052 ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

NOT DISPENSING THE RED THING ON TOP IS NOT GOING ROUND AND ROUND. NOT DISPENSING WATER AND SOLUTION. it wont throw water


This is a common problem with these cleaners. The solution seems to cyrstalize and black the small tube near the heater. Take apart the handle and the run a small screwdriver or pipe cleaner through to unblock the small tubes, put it back together an ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My bissell proheat carpet cleaner wont dump water or solution. It will however **** up water and solution if dumped on the carpet. Help I cant clean up doggie pee and it smells in this heat!


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 8910 ProHeat Clear View Upright Vacuum

I have a bissell 92002 proheat steam cleaner and for some reason it wont spray anymore or ****... the moter goes and it dont smell or anything but the water just wont come out


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Wont spray i have a bissell pro steam 2x and it wont spray the water out, i have cleaned everything and nothing seems to be working ...please help


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0481 seconds