Having problems with your Dirt Devil 12 Amp HEPA Filter Vacuum Vacuum ?
I just bought a Dirt Devil 12 Amp upright vacuum which seems to work fine but it is blowing out air in the front just under the filter housing. I see there is a vent there but should there be any air coming out during normal use?
Yes. For the unit to be able to take air in from use it has to exhaust air. This is normal.
Repair Help & Product Troubleshooting for Dirt Devil 12 Amp HEPA Filter Vacuum Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I just bought a Dirt Devil 12 Amp upright vacuum which seems to work fine but it is blowing out air in the front just under the filter housing. I see there is a vent there but should there be any air coming out during normal use? Thanks Brandon Smith
Yes. For the unit to be able to take air in from use it has to exhaust air. This is normal. ... Dirt Devil 12 Amp HEPA Filter Vacuum Vacuum
I just bought a Danby Premiere air conditioner #317826. I need a newset of tubing, as it is messed up. I would really appreciate it, my name & address is Sammie Visage, Rt 1 box 171, Carter, OK 73627. When I visited my sister in TN, she showed me hers and I was impressed, so bought one. I live in Western OK in a town of 300, A Lowes store is 2 1/2 hours from us. So you can see why I would really appreciate your help. Thank you, Sammie Visage
Hi i have a Meile cat and dog TT500 and it is shooting out dust. cannot find instruction manual to see if i have inserted filters properly, i have bought a new charcoal air filter but lid will not close properly when i put it in, has someone got a pic of how it should look, if its not the filters what could it be.
As far as the filter, either it isn't in all of the way, or it is the wrong one as there are several different ones.\015\012\015\012TT500 doesn't come up as a good model number, should start with a S then 3 numbers and end with an i. It ... Vacuums
Kenmore vac won't shut off, blowing heavy air from vent
For the stack of problems you have, it sounds like it be best for you to ditch it and get a new vacuum. The heavy problem sounds like a motor issue. The burning smell is most likely from the belt being loose on the power head.Economically ... Kenmore 25512/ 25513 Progressive Canister Vacuum
Wondering if the head is plugged up because it makes a sound like air is escaping somewhere. I've replaced the original cloth bag with a comparable "O" paper bag from Sears. I tried to see if there was a clog in the hose by placing a broom handle in the hose to see if something would loosen. I also cleaned the filter and the air filter. If the head is plugged, how can I fix it? We can't get the vacuum apart. Thanks.
I had this problem, but suction improved when the attachments were properly secured in their holders. ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum
Vaccuum issue I just bought a Eureka upright model 5892 BVZ, my concern is, I bought it on sale (floor model) and it didn't have a manual with it. I took it home and tried it, and although it appears to be working very well there is not dirt in the catch bin on the front of the unit. I tried the hose w/attachment and again it worked very well in picking up the cat hair, but where does the hair and the dirt go, I am afraid it is spitting it back out somewhere since I can not see anything in the c
If the dirt being vacuumed is not going into the dirt cup, then it must be just stuck in the hose and evenually will clog up. Check the hose and see it there is a clog in it, otherwise you have a years warranty on a new vacuum, take it into a warran ... Eureka 5892AVZ Bagless Upright Cyclonic Vacuum
I have had my Dirt Devil for just less than a year. I bought it in September, '07. Last week I was using it and it suddenly stopped running. I can see no reason why. I need to find a nearby repair station. I cannot afford to buy another one. I bought it at Kmart, it was on sale for $49.97.
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=846706\015\012Generic problem for all Vacuums\015\012I have had my Dirt\015\012Posted by mamavelda6 on ... Vacuums
I have a Frigidaire FAC124N1A1 Air Conditioner. I found lots of mold growing inside the air vent. How to clean?i THanks
I have a DC25 that I just bought in Dec 10. The last few times I vacuumed the carpet, the beater bar worked on and off. Now it does not move at all. I took off the beater bar to see if there were any obstructions, but there were none. Could you please help me with this. Right now my husband is saying that we should not have bought such an expensive vacuum (which he has said all along). I want to prove him wrong!! Up til a couple of weeks ago, it was working perfectly and I have loved it!
This is a good quality machine which I am sure wil last a long time in answer to your question make sure that the setting is set for carpet and not just flooring ..the head needs to be flat on the floor for the beater to work .I am assuming that thi ... Dyson DC25 All Floors Bagless Upright Vacuum
My 4 yr old Nilfisk vacuum cleaner has been working fine up until now. But suddenly, it has hardly any suction power and also, hot air seems to be coming out thru the vents on top and also thru the space that's normally used for blowing air OUT....the outlet with the retractable cover located close to the part where the power cable comes out of and retracts into. I've checked the filter and the hose and they are not clogged...I have also put in a new bag. Not keen to buy another vacuum cleaner u
Hi there SmartAlec from Nelsonvacuums.com.au here.It sounds like a blockage of some kind. The best way to find it is to set the machine up for normal vacuuming and remove o ... Vacuums
I just bought a Tfal Ultimate Autoclean iron FV 9450. I am reading through the manual and trying to figure out all the parts and functions. I cannot figure out how to remove the anti calc valve. I see it is part # 12 on the drawing but that piece on my iron (the bit with the little circles on it where it says, " anti calc plus') seems to be a flat piece of integrated plastic with no give or slide to it. .I cannot see how I'd possibly remove it. What do you do - push up? push down? The i
Anti-calc valve wings (grip) located at #3 of the 1-15 labeled description diagram that is part of the instruction manual. The wings are on either side of the dry/steam control #4. Lift up on the wings (grips) and the dry/steam control will accompan ... Vacuums
I am trying to install a train air horn. i bought a viair compressor for it. the horns themselves have a 12 volt hookup going to what i believe is acting like a solenoid. when charged, you complete the circuit and walah, the horn blasts. the problem im having is when the compressor is building pressure, the air horn is automatically putting out a dull sound, getting louder as the pressure gets more and more. it sounds like its out of one horn however. it is doing that without the 12 v hookup. is
Hi! just a tip regarding the sound that comes up when building pressure. Is there a gasket or rubber seal on the horn? You may need to replace this for it may be worn. The air may be coming out of the worn seals resulting to sound even when not trigg ... Vacuums
I was vacuuming the vent in the bottom of the fridge. I must have picked something because the motor got wildly noisey. I cleaned out hoses, etc. There is no suction. I can see the blades of the motor and they are not turning around. Model U4269-930 Series B.72. Can I get at the motor to see if something is keeping the blades from turning? What would be your suggestion. Many thanks. Pat Sauerman
Hi Pat, my name is John I will do my best to assist you.\015\012\015\012You certainly can get at the motor, with simple hand tools. \015\012\015\012Referring to this ... Hoover Vacuums
Hi,my vacumm is blowing air out of the vents .it is a electrolux pet lover 1800w.i have to put tape over some of the vent to stop it blowing all over the place.hope you can help
Those are the exhaust vents from the motor. It is designed that way to help keep the motor running cool. ... Electrolux EL1000A2 Pronto Bagless Stick Cyclonic Vacuum
I have bought a HOOvER freespace 2000W cyclonic vacuum cleaner but it runs VERY HOT and I am wondering if this is the usual running temperature. I have cleaned the air intake filter and removeed the e
Seals leaking Where the canister meets the machine, the seals are leaking, blowing whatever manages to get sucked up right back into the air. I can't see anywhere to buy new seals. What to do?
Hi.\015\012\015\012If you live in the UK I can help you.\015\012\015\012http://dysonmanuals.inc.io/\015\012\015\012Chris. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Poor design Our Shark was bought in Dec. This morning my husband started it up and while doing the steps the handle snapped off at the plunger site.. It is sooooo poorly made that it was only attached by a small plastic weld. The design is definately flawed and for the cost of the machine it is disgusting. As far as we can see, there is no repair that can be done.
Hi,Your right on all counts...is it less then a year...check for warranty..Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
When in the up right position the dyson looses suction then begins to take in air just above th filter at the vented area
It sounds like you need to follow the hose and make sure it's connected to the vacuum properly, and make sure all the fitting connecting the hose to the vacuum are sealed good. It's best to wipe the rubber gaskets between fittings with a damp cloth ... Dyson Vacuums
Hello, we have a Miele cat and dog turbo 5000 vacuum cleaner which we bought in December. It has just started blowing air out of the grid on the top of the cleaner instead of sucking from the tube. The whole top section which is opened to change the bags doesn't seem to want to clip down properly either. Do you have any ideas> I'm gutted as it was so good until this happened. Thanks Michelle.
The lid not closing properly is almost certainly the cause of your problem. Without that lid sealed tight to the body you will get no suction through the hose. So, the question is: why isn't the lid clipping down properly? Did you just change the bag ... Vacuums
Bought vac at garage sale. Should it blow air out of top at the same time it vacumns? All it seems to do is re-circulate the dirt.
It is missing the internal filter...Google "Genie Vacuums" for the part needed.\015\012Good Luck! ... Genie Company GV150 Wet/Dry Vacuum
Dust....dust....dust Hello, I recently bought a house with an older Electrolux Central Vac system. I'm unfamiliar with them, so I'm not sure how to deal with this: I cleaned up some mortar dust with it, and noticed not too long after that when I went into the garage, there was a fog of dust. The hose from the unit is venting into the garage. Is this normal? I have since used it for everyday household cleaning and each time I go back to the garage to a cloud of dust. Is there anything I can
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=113662&thid=662824\015\012Dust....dust....dust\015\012Posted by Kitkatman on Jun 11, 2008\015\012Hello,I re ... Electrolux Central Vacuum
No suction I have an upright bissel 120v vacuum that has no clogs and a lot of air from sides where vent located but no suction.
... Bissell 3545 PowerGlide Bagged Upright Vacuum
Kenmore 21875 One day it's working fine. Next day, it won't turn on. When I attach the hose to another vacuum cleaner, it runs. Is there a reset button on the canister? Could it be the receptacle is bad? My Kenmore Progressive won't turn on today either -but was fine last week. I cleaned the filters checked for blocked air, tried a different outlet and no luck. I'll check the pins on the connections and see if one of them is not matching up or appears worn.
Give the prongs a wiggle and see if there is any play in them.Might just be a plug end. ... Kenmore 25512/ 25513 Progressive Canister Vacuum
I have a SEBO air belt k. The wire retraction is not working. I dont see how to get a look at the mechanism. Can you help?
OK, but be warned... it's not so difficult getting the thing apart, but making a neat job of reassembly has been known to drive grown men to despair. And that's because you have to remove the airbelt. But first things first:1. remove the ... Sebo Air Belt K2 Bagged Canister Vacuum
I bought a Kirby obout 2 months ago, the salsman said they have a office in Bel Air MD. They where to ship me Bags and a gallon of shampo. I have not receivedit. He told me it would be shiped from the main office.
You should get it from the office which originally sold you a Kirby. You should have Ph# on the paperwork. However, if you will be successful doing that, you can always order them on our website: ... Kirby Ultimate G Bagged Upright Vacuum