Having problems with your Dirt Devil 12 Amp HEPA Filter Vacuum Vacuum ?

The upright lock

\015 I cannot get the upright to stand up. can i fix the locking mechanism myself?\015

Answers :

A new foot pedal is needed . should be around $3 at a vac shopits a snap in part
Repair Help & Product Troubleshooting for Dirt Devil 12 Amp HEPA Filter Vacuum Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Hoover Z 400 collapsible vacuum won't lock in the upright position. I pull the pin to change from a cannister to an upright, but the unit won't lock into position


This just happened to me. i took the vacuum completely apart and found that there is a locking plastic "tooth". this had snapped off but still it the track. the damage was bad but i was able to wash of all the lube off it and used a 2 part epoxy glue ... Hoover F5858-910 SteamVac Vacuum

I'm trying to get my S7000 Miele to stand upright an lock in this position. It wont , i tried to see if foot release was jammed but cant tell it doesnt seem to release to let it move upright an lock in again..help


There is a rear dust cover that sometimes gets stuck, this will make it almost impossible to lock the handle up. First locate the cover which is at the rear right above the wheels. It's about 2"x8" and ribbed vertically and slides up behind the rear ... Miele S7210 Bagged Upright Vacuum

We cannot get the Miele S7210 Twist back to the upright position. The foot lever appears locked. We fear forcing it back to upright.


... Miele S7210 Bagged Upright Vacuum

Dyson will not lock in the upright position - Dyson DC07 Bagless Upright Cyclonic Vacuum


There is a video guide here for this: \012\012 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I removed the brush from bottom of the vacuum to remove hair from the bristles. When I re-assembled the vacuum, there was no longer suction. Also, the vacuum no longer stands upright when not in use. It's like something is blocking the upright portion from locking.


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC01 will not lock in upright position - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Hoover windtunnel tilt mechanism won't remain locked in upright position or at any of the fixed angle positions - now any slight bump and the lock releases. Normally you must manually use the small foot pedal release on the left side as you face the vacuum from behind.


Hello, stanI was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I ... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum

Miele s7000 I clicked my upright into sitting position and accidently bumped the foot release knob. The body fell back and now I can not get it to click back into upright sitting position. Something is now in the way of it locking into place. This happened last year and it was under warranty. it no longer is and I would like to be able to fix it myself in the future. Can you help me? Thank you. Kacee in Oregon


... Vacuums

Broken upright locking mechanism


I need to know what brand the vacuum is. Various brands have different ways of locking the handle, but most incorporate a pedal that engages the handle. It sounds like you will have to replace the pedal. I hope it's not the handle portion. That becom ... Vacuums

Dyson dc07 will not lock into upright position


- Stand behind the vacuum cleaner and look at the right-hand side wheel\015\012- Remove the AI PIPE (it has two purple buttons that you push together to lift it up and out - it looks like a Tuba)\015\012- Lay the handle down and look for ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Oreck XL vacuum will no longer lock in the upright position.


... Oreck XL Ultra Bagged Upright Vacuum

My Miele Twist vacuum will not lock into the upright position. Also I sucked up a tassel from a throw pillow and have a clog. I took off the little clean out plate on back...it isn't in that par


... Miele Vacuums

How do I replace the upright lock assembly on the Dyson 07 Animal


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Roller will not engage unless handle is in locked upright positition


... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Kenmore intuition 31100 vacuum broken upright locking mechanism


... Vacuums

The upright lock


A new foot pedal is needed . should be around $3 at a vac shopits a snap in part ... Dirt Devil 12 Amp HEPA Filter Vacuum Vacuum

Part that locks vacuum in upright position, I cannot find


I have the exact same problem as you described it. I was hoping to find this plastic part reading 38719-006, and it seems it is not available as a part by it self. The attached image includes both the part you will need to purchase 43516010 along w ... Vacuums

Fitting a replacement locking button on a Miele upright vacuum cleaner


... Vacuums

Eureka Boss Smart Vac won't lock in upright position.


... Eureka Smartvac 4870 Bagged Upright Vacuum

Wheels the wheels on my vacuum bunch up, have replaced them and still doing it, also it will not lock in an upright position, something fell off do not have part


The axle for the rear wheels have worn into the cut outs in the body that it goes through and they are rubbing on the wheel wells. This common for this vacuum model , the only real fix is to replace the body assembly. Sears will have to do this, this ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Need to find a replacement handle lock for dirt deviel upright


Try your local repair shops, they will need your model number. They should be able to order it if they don't have one. ... Vacuums

The upright lock and spring has come out of my dc14 dyson vacuum. How do you get it back where it belongs?


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson 28 handle is stuck in the locked and upright position. Vac runs fine, just can't get the handle to release to run the vac


How do you remove the air duct (plastic sliding piece) that is making the vacuum stay in locked upright p[position? ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My old hoover convertible will not lock in the upright position.


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=682682\015\012Generic problem for all Vacuums\015\012My old Hoover convertible will\015\012Posted by ta ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0302 seconds