Having problems with your Dirt Devil Breeze Bagless VacuumVacuum ?

Belt keeps burning off

\015 I have replaced my belt 3 times and it just breaks. What else can I check?\015

Answers :

Be sure the brush roller spins freely. Tear apart the end caps and get the carpet string and hair out of it for better performance and longer belt life. Nothing much else it can be.
Repair Help & Product Troubleshooting for Dirt Devil Breeze Bagless VacuumVacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I heard that a class action lawsuit against Oreck Vacuum is being started because of all the problems customers are having with their vacuums. Does anyone know about this? My Oreck is only a couple of years old and keeps burning up belts. I took it in after only one week of usage when I started to notice white smoke coming out of it and the smell of burning rubber. I feel like I got the old run-around, when the service tech told me he couldn't find anything wrong (but replaced the burned up belt


You are correct about the fact that legal action has been taken. Go to this link to read more\015\012\015\012 ... Oreck XL2200 Bagged Upright Vacuum

Belt slipping Belt slips off and rubs causing burning smell from the belt over heating. Of course this puts an indent into the belt and has to be replaced. How do I keep the belt from slipping off? I see no place for a belt adjustment. Which I know would eliminate the problem. Really aggravating to have to replace belt only after two uses.


On the roller/brush where the belt sits if that is scarred up or grooved out that will cause the belt to slip if you can fix roller try but i suggest new roller ... Hoover Company Wind Tunnel U53019 Upright Vacuum

My Oreck Vacuum cleaner keeps burning up belts. I


Ours is doing the same, burning smell and chewed up belts. Not happy customer. ... Oreck XL2000 Bagged Upright Vacuum

Belts keep burning and breaking on turbopower 7100


If a roller brush does not rotate freely, the motor shaft spins in one place on the belt until it heats it up and breaks it. Roller brushes can become clogged on the ends, especially with pet hair. The solution is to remove the roller brush completel ... Vacuums

Got Dirt Devil Featherlite,keeps burning the belt out immediately and there is only one way to put the belt on...have put on 4 new belts.....what up?


Hi There,When a belt breaks immediately after installing it, this can ONLY mean one of two things. The first is that the belt was put back on incorrectly, and it may be pinched underneath of the beater bar. This would cause it to bre ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

My vacuum cleaner belt keeps burning up as soon as


CHECK ROLLER BRUSH PROBALLY HAS STRING WRAP UP AROUND THE ROLLER OR THE END BEARINGS ARE FROZEN IF SO SRAY WD40 IN BEARINGS TILL THEY FREE UP OR REPLACE ROLLER BRUSH ... Bissell 6594 PowerForce Bagless Upright Vacuum

Belts keep burning up


Have a Hoover WindTunnel model 5750-900 but suspect this would apply to other models. Kept breaking belts! Make absolutely sure the roller bearing are not bound up with hair or carpet fibers. Once beeter is out, both ends unscrew and you can remove a ... Hoover U5172900 Fold Away Widepath Bagless Upright Vacuum

Belt keeps burning and breaking


Hello There,It sounds like you need to replace the roller brush. If your Bissell is breaking belts that fast, then that can only really mean one of two things. The first being that the belts are not being properly installed, and the rol ... Bissell 6594 PowerForce Bagless Upright Vacuum

My vacumm keeps burning up belts i need to make sure the proper way to install new belt


Does it need a real good cleaning\015\012 and make sure nothing in stuck in it ... Panasonic MC-V7398 Upright Vacuum

Proheat 8910, just used once, pump belt keeps breaking. I replaced it two times, there is a burning smell and then when I look at the pump belt, its broken.


... Bissell 8910 ProHeat Clear View Upright Vacuum

WHAT'S THE EASIEST WAY TO INSTALL BELT?? I KEEP BURNING BELTS.


First check to see if the brush rolls freely with no belt in place. If not remove the brush roll and clean and lube the end caps. If the caps are nylon try to gently pop them off to inspect underneath.Clean the motor shaft with extra fine wet d ... Bissell 3576 CleanView II Bagless Upright Vacuum

My hoover Wind Tunnel vacuum cleaner's motor spindle keeps overheating. Because of the high temperature, it keeps burning through belts (the big, wide ones). I have taken it in to the vacuum repair shop about three times now, and the problem has never been fixed. Does anyone have any advice on how to fix this or should I just buy a new vacuum?


... Vacuums

The belt keeps burning and breaking within 2 seconds of use


The rod should have a plastic runner wheel on it to hold the belt in place and reduce friction ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Belt keeps burning off


Be sure the brush roller spins freely. Tear apart the end caps and get the carpet string and hair out of it for better performance and longer belt life. Nothing much else it can be. ... Dirt Devil Breeze Bagless VacuumVacuum

My hoover belt keeps burning when i replace it. i dont have the manual so i dont know what im doing wrong.


Probably when you close it back together, there is a piece rubbing against that you do not see right away but could maybe hear it. ... Hoover Vacuums

Bissell powerforce vacuum belt keeps burning and breaking


... Bissell 6594 PowerForce Bagless Upright Vacuum

I have a bissell easy vac and the metal part that spins the rubberband and brush keeps overheating and burning all the belts I replace. What should I do?


Sounds like the beater brush is frozen and won't turn. Remove the beater brush and clean off all debris, especially at both ends. ... Vacuums

My Dyson DC 15 makes a horrible noise when switched to do carpets - sounds like gravel in the motor - and then comes the burning smell. Nothing keeping the brushes from moving, and I think they are. I am concerned that it is a belt or the motor. How do I know?


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson dc 14 the belt keeps breaking with the smell of burning rubber looks like the motor spindle does not turn any solutions


... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Belts keep burning up when i turn it on - Oreck XL2000 Bagged Upright Vacuum


The brushes probably have strings or excesive carpet fibers where where it meets the base of deck and the cover remove screws from bottom pop out brushes and remove string and reasimble ... Oreck XL2000 Bagged Upright Vacuum

My Kirby Heritage II vacuum is not picking up dirt up out of the carpet like usual, and I have to keep setting it lower to pick anything up. I finally get it to such a low setting that it starts sucking the carpet up and makes a whirring noise, and starts smelling. Every time this happens, we find the belt has been burned. We are wondering if the brush roll inside with the brushes that pick up dirt are worn out and too short?


... Kirby Heritage II Vacuum

My Kenmore Progressive keeps burning up belts even after I have changed the bag, cleaned the filters and checked to make sure the agitator was clean and free turning


On the left hand side, just above the handle release, is a lever to adjust if you are doing hard wood or carpet cleaning. When adjusted for hard wood, that lever releases the belt and just uses the "vacuum" function. When set for carpet it engages ... Kenmore Vacuums

Vacuum keeps burning up belts - Vacuums


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=565438\015\012Generic problem for all Vacuums\015\012Vacuum keeps burning up belts\015\012Posted by ... Vacuums

I HAVE A KIRBY AND IT KEEPS BREAKING AND BURNING BELTS.


Hello, Check this guide to be sure that your brushroll is in correctly. Follow it step-by-step and it should help of your brushroll spins freely. If it doesn't, there are new brushrolls available through the links in the guide as well.\015\012 ... Kirby Generation 3 Bagged Upright Vacuum

The belt keeps breaking. Like it's burning through.


Sounds like the beater brush the belt is supposed to turn has frozen up due to debris.\015\012Remove the brush and clean all debris.\015\012At the ends of the brush will be two fasteners that hold the brush in place, be sure all debris is cleaned fro ... Dirt Devil Breeze Canister M082550 Bagless Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0683 seconds