Having problems with your Dirt Devil CE5500 Floor Keeper Upright Wet/Dry Vacuum ?
Ce5500 LEAKING NEED REPLACMENT PART AND WATER IS LEAKING
Repair Help & Product Troubleshooting for Dirt Devil CE5500 Floor Keeper Upright Wet/Dry Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Ce5500 LEAKING NEED REPLACMENT PART AND WATER IS LEAKING
... Dirt Devil CE5500 Floor Keeper Upright Wet/Dry Vacuum
My Delonghi DSS50 steam floor cleaner water reservoir has a broken valve on the bottom where it fits into the steam unit. It leaks water rather than producing steam. I would like to find the valve and replace it or buy a new water reservoir with the valve in it. I cannot find the part I need. Can you help me?
... DeLonghi DSS50 Scopa Upright Steam Vacuum
Envirosteamer 300 leaking water. Older yellow model. I put water in it and as soon as it heats up, all the water leaks out the bottom, and it barely gets warm! It worked fine before. Could it be seals need replacing or something? Thanks!!
... Eureka Enviro Steamer 370 Upright Vacuum
Problem: water will not dispense Local repair shop gave verbal diagosis>need both solenoid valves. Found this part on www.nelsonappliance.com $14.95 each. (Shop quoted $98 for repair & parts) Can i access & replace parts? Is there a "how to" video available?
... Bissell 9200 Upright Vacuum
Sunbeam water dispenser YLR2524H2 - the hot water lever broke and I need to know if I can get a replacement part and can I install the new one myself?
Have a Polti steam iron with sparate water tank. Need to replace the iron part but can't remove the screws from the bottom of the tank part! The seem to have 6-pointed star-shaped slots.
... Polti Vaporetto 2000R Vacuum
I lost the detergent container on my Hoover Model F7220-900. Its a small plastic bottle that sits on the back of the clean water tank. I called the help desk and they told me that they no longer make that part so I have to pay $55 to replace the whole tank which will come with a detertent container built in. The whole carpet cleaner was only worth about $225 new. I don't feel I should have to pay $55 for a part I don't need but the machine is worthless without it. Any good ideas to solve th
... Hoover F7220900 SteamVac V2 Upright Vacuum
I have a Eureka Atlantis Opti Heat model no.2596. The bottom is cracked and the clean water and shampoo leaks all out the bottom. Is there a repair part for it. I've only used it 4 or 5 times and i really need a new part.
... Eureka Atlantis 2595A Upright Wet/Dry Vacuum
Bissell 1425 Little Green ProHeat Steam Cleaner - had a problem with leaking. I got replacement parts, installed in the water / soap tank, now it won't spray out any water or soap.
Did you do this work yourself?\015\012What parts were replaced in the unit?\015\012Sounds like the connection to the pump has come loose. ... Bissell 1425 Little Green ProHeat Handheld Steam Vacuum
I need to buy a replacement Water Reservoir Cap for my steam buggy. Any lead as to where I can get this part?
... Tristar SB Steam Buggy Vacuum
My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?
Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
The water dispenser must have been left plugged in and the hot water switch on without any water bottle on the unit because a plastic part inside got warped and now the unit tries to heat the whole 5 gallon jug of water. I want to replace the inside plastic part but I don't have the manual and don't know which part no. to request or where to send my request for parts.
Please state the brand and model number of your water dispenser, so I could give you the exact part and lead you where to purchase it.Post back ... Vacuums
What part of the vacuum was damaged or needs replacement?
Probably got the motor wet. You would have to dissassemble the machine to verify damage to components. It may require a new motor there is not much else in these. ... Rainbow E series Canister Wet/Dry Vacuum
Rainbow Series E is leaking. Not sure if water is leaking from the water bin (doesn't appear to be cracked/broken). If not the bin, where else might water be leaking from and what are repair options? Have replaced belt on carpet attachment, cleaned the opening where hoses attach to the canister, etc
You need to clean the separator. ... Rainbow E series Canister Wet/Dry Vacuum
Steam wizard water cup in needs to be replaced
... Sharper Image SI570 Steam Wizard Handheld Wet/Dry Vacuum
Bissell 1631-1 Need replacement Water Hose Meter Assembly
... Bissell 1631 PowerSteamer ProHeat Canister Vacuum
Need replacement parts
Yes, the parts are available to replace under $5.00, however a dealer will want to sell you a new tank. (this is accurate as of 2 months ago) ... Hoover F6021-900 Steam Vacuum
Need parts Anyone know where I may find replacement parts for this cleaner? I also need a manual. Thanks
Go to this site they have the schematic and replacement parts.\015\012http://www.hescoinc.com/vacuum_cleaner_parts/bissell.html ... Bissell 1631 PowerSteamer ProHeat Canister Vacuum
Hoover steamvac f6020-900 leaks water with switch off and in upright position, can't find the leak in either clean or dirty water tank. also need a owner/maintenance manual.
... Hoover F6020-900 SteamVac Upright Vacuum
I have a Holmes HM495 humidifier and the plunger that releases the water into the base has rotted. Holmes indicates they do not sell parts which is insane. Any advice on replacing this small part as I do not want to have to replace the whole unit
Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby's are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,
You can get better prices from Goodvac.com ... Kirby Generation 3 Bagged Upright Vacuum
Water leaking When I fill the canister portion with hot water and put it in my machine it immediately begins to leak out the bottom. It has just started doing this. Do I need to take it in for repair?
The water tanks on this unit have had a very bad history of leaks. Most of the repair people had never heard of this unit, but one did, and had a spare set of tanks. If the unit is still under warranty, it is worth your while to get a replacement u ... Eureka Atlantis 2595A Upright Wet/Dry Vacuum
D4 Rainbow leaking water around the water basin while running. Already replaced the seal. Still leaking.
Clean the water separator. Use a tooth brush if you do not have the Rainbow separator cleaning brush. It is the same thing, and works perfectly. :-)\012\012Ralph ... Rainbow Technologies D4 Bagless Vacuum
I have a lawn sprinkler system that has a main inlet valve that opens when the sprinkler is run. This inlet valve failed after a recent long freeze when water retained in the valve became ice and then expanded. Questions: 1. Can I replace just the plastic parts that broke or do I have to replace the total valve? The valve is made by FEBCO,CA and the following is written on the valve: 4010387; 765-PUB; B 6412 and 150 MWWP. 2. Where can I get the valve or the parts? My zip code is 77479 and I ca
Yes you can, take the piece into home depot they can help with it. usually you can replace the total valve as awhole , its easier to do it this way, and still cost effective :) \015\012\015\012press add a comment in upper right corner if ... Vacuums
I have a hayward 1HP superpump with an Ao Smith UST 1102 motor on it. Last year I had a leak in the pump, and I believe I got some water in the bearings of the motor. Over the winter I replaced all the seals in the pump, and have no leaks this year, but the pump is sounding pretty loud since opening the pool this year. I have (2) fold question: (1)I can not find any information on the where I can find a replacement bearing for this pump. (2) I can not find a procedure on HOW to go about
Hello. I get my parts here http://www.poolcenter.com/parts_pumps_hayward_superpump.htm\015\012\015\012Joe ... Vacuums