Having problems with your Dirt Devil Featherlight Bagless Upright Vacuum ?

Belt replacement How do I replace the belt on the dirt devil featherlight


Answers :

On the bottom you will see 4 screws.take them out and the bottom plate will come off.before you put the new belt on look at the motor shaft.if you see old rubber on it you need to clean it off or your new belt won't last very long
Repair Help & Product Troubleshooting for Dirt Devil Featherlight Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Belt replacement How do I replace the belt on the dirt devil featherlight


On the bottom you will see 4 screws.take them out and the bottom plate will come off.before you put the new belt on look at the motor shaft.if you see old rubber on it you need to clean it off or your new belt won't last very long ... Dirt Devil Featherlight Bagless Upright Vacuum

No suction My dirt devil featherlight vacuum has no suction. I have checked all hoses and they are clear. I did replace the belt which had broken and since I did that the suction is gone.


Take the cone filter out of the dirt cup and start it up if you have suction the filter is the problem,if still no suction the you have a clogged hose or a clogged intake hose which is at the bottom it will be a clear hose coming up the backside fro ... Dirt Devil Featherlight Bagless Upright Vacuum

Replace belt i need to replace the belt on an upright dirt devil 086310 vaccume but do not have a manual and can not find how to open the assy to replace the belt


On the bottom, there should be a few screws to remove to remove the plate covering the brush roll. However some may have screws on the top housing to remove the top. ... Vacuums

Hi, The belt of our Dirt devil bagless vaccum broke and we got new belt and replaced it. Even after replacing the belt, the brush is not rotating. Any suggestions please ?


Did you check to see that the beater brush, the brush that the belt drives, is free of debris and moves freely?\015\012When they bind up they can cause the belt to break.\015\012Remove the beater brush just as you do when changing the belt and clean ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

Dirt devil jaguar belt replacement - Dirt Devil M085580 Featherlite Plus Upright Vacuum


... Dirt Devil M085580 Featherlite Plus Upright Vacuum

Replace belt on dirt devil vision - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Replacing a belt on a dirt devil vaccuum


That metal rod is probably the motor shaft or pulley. On some of these, the open space between the shaft and top cover is very narrow. You just have to push thru th opening to around the shaft, then put it on the brush roll. Th belt will stretch e ... Hoover F7220900 SteamVac V2 Upright Vacuum

Replaces the belt on dirt devil dynamite pluse model put everything back together started it and it burt the new belt up that fast. I put it around the beater brush and the metal bar I thought it should go around, yet it seemed like there should be something else there to put the belt on. What do you suggest? Do you have picture I could go by?


The metal bar you put it around if the bar itself does not spin it is going to burn the belt up. Every thing that the belt is supposed to go around has to turn or the belt will rub on the piece not moving and brake. ... Vacuums

Belt installation How do you install a #5 replacement belt on the Dirt Devil upright vacuum cleaner?


One end of the belt will go over the motor drive shaft and the other end will slip over the roller brush. Also, you can find this belt at www.vacbelts.com. ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

I replaced the belt on my Dirt Devil Featherlite Bagless Vacuum and the brush roller rubs and makes a very loud noise when turned on. I have gone exactly by the manual instructions and made sure the belt and end caps were on correctly, but the bristles still rub the back and it makes a very loud noise. Without the brush roller in the vacuum, it sounds and runs normal. What could the problem be?


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=561283\015\012Generic problem for all Vacuums\015\012I replaced the belt on\015\012Posted by piggyt ... Vacuums

Replace the dirt devel model M08245 belt - Dirt Devil M08245 Power Reach Bagless Upright Vacuum


... Dirt Devil M08245 Power Reach Bagless Upright Vacuum

Replacing belt on dirt devil featherlite vacuum


Did u check the owners manual ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

Dirt Devil Reaction Vacuum belt replacement


The manual is confusing - I had the same problem. Make sure you put the belt around the smaller motor axle, not the lever arm attached to the on/off foot switch. It's a bit counter-intuitive, but that was my problem with this. Jeff ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

Need to replace belt on Dirt Devil Swivel Glide Upright-no manual


... Dirt Devil SwivelGlide Bagged Upright Vacuum

My dirt devil featherlite's brush won't spin. i have already replaced the belt which is what i thought was causing the problem.


Does the motor spin? ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

I don't know how to get to the belt on my Dirt Devil Featherlight bagged vacuum.


... Vacuums

How do you replace the belt - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


Actually need a model number in order to do a search for a user's manual.\015\012I did locate this URL:\015\012\015\012http://www.ereplacementparts.com/search_result.php\015\012\015\012that shows the family of Vision Turbo units. If you ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

My dirt devil ultra vision is making a loud noise when turned on. I replaced the belt and cleaned the filters and the noise is still there.


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

How do you replace the belt on the dirt devil feather lite vaccum.


Not a expert just trying to help,,turn vaccum over take plate of and pull brush out and install new belt,,hope this help you ... Dirt Devil CE6100 Featherlite Upright Vacuum

How to replace the belt on a dirt devil 086925


... Vacuums

Dirt devil vacuum is screaming loud and barely picking up. Ear plugs did not help.Just replaced a broken belt.


You need a new motor or a new machine that is unfixable ... Dirt Devil M086700 Vision Bagless Upright Vacuum

I need help replacing the belt on my Dirt Devile Swivel Glide.


Look for a silver motor shaft behind the brush roll but in line with where the belt sits. If the shaft is blackened with burned rubber or rusty, it should be polished with wet dry sand paper, XTRA Fine. Then install the correct belt onto the sh ... Dirt Devil SwivelGlide Bagged Upright Vacuum

How do I replace the belt on Royal Dirt Devil hand vac model 103?


... Dirt Devil Vibe AllPurpose Hand Vacuum Bagless Vacuum

How to replace the belt - Dirt Devil Vacuums


Remove screws. Remove roller. Remove old belts. ... Dirt Devil Vacuums

How do I replace the belt on the Royal Dirt Devil Hand Vac, Model #103?


... Dirt Devil Vibe AllPurpose Hand Vacuum Bagless Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0578 seconds