Having problems with your Dirt Devil M082550 Breeze Bagless Canister Vacuum ?

Dirt devil breeze with automatic height adjustment has become hard to push on carpet. How do I fix that?


Answers :

Repair Help & Product Troubleshooting for Dirt Devil M082550 Breeze Bagless Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dirt devil breeze with automatic height adjustment has become hard to push on carpet. How do I fix that?


... Dirt Devil M082550 Breeze Bagless Canister Vacuum

Dirt Devil Breeze Bagless Upright doesn't auot adjust height


... Dirt Devil Breeze Canister M082550 Bagless Vacuum

Dirt devile featherlite vacuum pushes extremely hard on high pile carpeting


The dirt devil featherlight has a automatic height adjustment for carpet and bare floors.check the wheels and see if there is something wrapped up around the wheels ... Vacuums

My dyson vacumn is hard to push on carpeting. How do i fix it?


This happens when the bristles in the brush roll get worn down too short. Put in a new brush roll and the machine will pull itself over the carpet, so you hardly have to push at all. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson DC07 will hardly push over new low pile thick carpet. Too much suction. Any adjustments


... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson dc17 is very hard to push on a hardwood or carpet floor. When I take the canister off and push it while on it works great, so I figure the canister is giving me the issue. What o I fix? Thanks


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Vacuum very hard to push on carpet. How can the roller be adjusted to accommodate the thickness of the carpet? Oreck XL Upright Model no. U4140HHPKCOST Serial No.: 4140CSTDC002218


... Oreck XL® Classic Bagged Upright Vacuum

Self propelled vac: goes great on hard floor or hard slick carpet. Goes backwards fine but will not pull itself forward very well. Requires some effor to push it forward. I have adjusted the cable so the lever on the motor goes as far forward as possible. Suggestions? Model U6446-900


Dear Nasherrill,\015\012\015\012I've found a friend! I thought I was the only person in the world who owned the Hoover Model U6446-900! This model does not appear on the http ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Pushes hard - Dirt Devil Breeze Canister M082550 Bagless Vacuum


Check for obstructions under the suction portion of the vacuum where the roller is located. If a belt is installed, check to see if its broken. Hope this helps. ... Dirt Devil Breeze Canister M082550 Bagless Vacuum

My dyson vacumn is not adjusting for height of carpet - really hard to push


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Very hard to push, the automatic height adjustment seems to be stuck in low postition


I'm growing tired of telling everyone what a piece of **** this vacuum is, I think you'll be the last! There is a design flaw that forces the wheels down according to how low you are holding the handle. Even when holding it at a normal operating heig ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

I have a self propelled Royal Dirt Devil vacuum model number 087900 and it goes backward fine but forward has to be pushed so hard it's impossible. Is this a switch? Do you know about how much the part would cost and can it be done by a beginner. We fix a lot of things ourselves but we aren't mechanics by no means. We put a brand new belt on it. I don't think it can be put on backwards and brush turns fine. Where is the switch? Use layman's terms.


You might try a new belt and/or brush roll. The brush roll is what helps pull a vacuum forward, the power drive helps, but if the brush isn't turning like it should, then it will hinder forward motion. The belt may look ok, but they stretch to the ... Vacuums

My Oreck has in the last 2 weeks become very hard to push on carpet , ok on bare floors. Thanks


Look at 3 things:\015\012(1) is there something wrapped around the rear \015\012wheels or axles?\015\012(2) Is there something wrapped around the small, front wheels or axles. (not likely this is the culprit.)\015\012(3) Is yo ... Oreck XL2000 Bagged Upright Vacuum

My Oreck has become very hard to push across carpet


IF IT PUSHED EASILY ON THE SAME CARPET BEFORE, THEN THE BRUSHROLL IS NO LONGER CONTACTING THE CARPET IT USED TO. A NEW BRUSHROLL AND/ OR BELT SHOULD GET YOU MOVING AGAIN. TRY THE BELT FIRST, MUCH CHEAPER.\015\012\015\012IF YOU HAVE RECENT ... Oreck XL Deluxe U3700 Bagged Upright Vacuum

How do you fix the automatic height adjustment


... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

I have a Dyson all-floor model (not the ball). I recently replaced my carpet to a Frieze. Since replacing the carpet, the Dyson is extremely hard to push. It almost forms a "seal" with the carpet. Seems to work fine on Berber carpet and laminate floor. My husband has checked to make sure the brushes are working, hoses are not clogged and belts are OK. I've had it for about a year. It is virutally impossible to push on the new carpet. Any ideas?


Have you adjusted the brush control system. If you look at the link below page 6 will tell you how to adjust. If this is not you vacuum please give the model # of the one you have so I can help you more.\015\012\015\012 ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

The suction is good, but it can't pick up most of the stuff on the floor. The hand held hose works very well, but it doesn't even pick up little fuzzies reliably when I push it along. And, the suction is too hard I think because it used to push easily and now I have to push really hard, even on flat carpet.


Check entire length of hose, including the piece in the power head, for clogs. Simply drop a marble in one end and allow it to roll out the other. If it doesn't, then the hose is clogged somewhere. ... Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum

My dirt devil is hard to push


... Dirt Devil M088175 Extra Light Upright Vacuum

I have a Dirt Devil M088400 - Vision Turbo Vacuum. A spring fell from the bottom and the carpet height adjust isn't working. The rollers under the unit won't stay in place either. Can you tell me how to put the carpet height adjust back together?


The roller attaches to wheels. There is a spring that attaches from roller to hight adjustment selector which is a plastic peice with a little hook on bottom that spring attaches to. Both peices should have a hook that the spring ttaches to. ... Dirt Devil Vacuums

My Dyson DC07 has recently been service and was making a clattering noise and very hard to push. We have taken it back and he has changed the clutch mechanism under the base which has solved the clattering, but it is still really hard to push because of the suction. It is even lifting the carpet in one room. Can you tell me what the possible reasons for this could be? One thought we had was that the little rubber wheels on the bottom cover could have worn so the hoover is closer to the floor


On the sole plate you should have 5 little wheels, these are prone to jamming after a while. You should make sure these are not jammed in anyway.\012\012You can release these with a screwdriver, but be careful not to prize too hard as you ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Oreck XL 7000 is hard to push through a modest pile carpet. They gave us a shag attachment but all that does is push the carpet down. It is not ususable for us with bad backs etc.


... Oreck XL2200 Bagged Upright Vacuum

My bissle proheat carpet cleaner/vaccuum has become clogged with the cleaner solution. As a result the cleaner solution does not reach the carpet when in operation. I had this fixed before at a local appliance store but they are now closed. I would like to do it it at home. Is there is simple solution to clean the system so it becomes functional.


Take apart the handle (a few screws) unclip the small clear hoses, use a pipe cleaner or small screwdriver to clear the hose from the crystalized cleaning solution that is blocking the hose. Put it back together and it will be like new. ALWAYS run ... Vacuums

Dyson suddenly hard to push on carpet


I know this sounds silly, but it works. Turn it over and wipe all the black residue off the bottom of it (off the plastic on the bottom that rubs on the carpet as you push and pull it). I thought my husband was out of his mind when he told me that ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dirt devil automatic height adjustment not working


... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

Why is my Shark vac hard to push on my Smartstrand carpet?


... Euro-Pro EuroPro Shark Navigator Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0918 seconds