Having problems with your Dirt Devil M085530 Featherlite Bagged Upright Vacuum ?

Cord is broke

\015 We found where the cord is broke. However don't know how to get into motor compartment to get the end to try and fix.\015

Answers :

Repair Help & Product Troubleshooting for Dirt Devil M085530 Featherlite Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to replace the cord on an older Hoover upright, model S660, about 1986 vintage. The cord broke where it enters handle. Handle comes apart easily. Just not sure how to pop the switch out without breaking it. Was looking for a manual online to see parts diagram and/or instruction on disassembly and cant seem to find one for that old of vacuum.


Check ebay. those vacuums are worth fixing. I loved them. they would **** the carpet off of the floor! those cords aren't hard to replace.just remember the way you got the old one out. ... Vacuums

Power cord plug broke and cord went back inside.......how do i open??


Call your local Electrolux office. Trying to fix it yourself will void your warranty. If you need any assistance call 570-326-1731 and ask for Liz, I will be happy to assist you if I can. ... Electrolux Guardian Bagged Canister Vacuum

HOW TO REPLACE CORD BROKE INSIDE UNIT CAT TAKE IT


You know the cord is broke? and you wish to remove and replace the broken one? well it has to be opened to remove or reconnect the broken wiring. is there screws attaching the removable parts in order to get to the broken cord? recommend you locate b ... Hoover Elite U5061-900 Bagged Upright Vacuum

Broke cord reel on Lux Ren.


The only way is to replace the cord winder assembly. ... Electrolux Guardian Bagged Canister Vacuum

Is it worth trying to fix the end of the power cord that goes in the wall outlet? One of the metal prongs broke.


You can buy just the end at the local hardware store. This is the best way to fix it. It is also the safest way to do it and not risk electric shock. ... Eureka Whirlwind 4383 Upright Vacuum

End of power cord loose broke need to find a kirby store to fix


You dont need kirby just take it to a local electronics repair shop as we are all trained to fix simple cord and plug problemstake care ... Kirby Vacuums

Hoover Windtunnel We bought a new power cord because our's broke. We cannot figure out how to uninstall the old one and reinstall. My husband has removed just about all of the screws.


If it goes in just at the bottom of the handle, take off the handle, then remove the tool holder, then you can replace the cord. If it goes in near the bottom, then you will have to remove the motor cover and light to get to the connecting wires. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

My scunci steamer fell off while collectin the power cord it broke its can it be plastic body around the triger can it be fixed? can it be replaced?


If the steamer still functions... use some glue that would be resistant to heat and works on plastic... i'm drawing a blank at the moment as to what glue would work. actually when i read that again... it broke it's can... you mean cannister ?\ ... Scunci 52067 Handheld Steam Vacuum

My dirt devil ultra vision cyclonic power cord broke and needs replaced. i cannot access the motor to fix it


... Vacuums

Cord hook broken


You may call Hoover Service @ 440-996-2000 ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum

Kenmore Canister 116.20712007 replace power cord


... Kenmore 22612 Bagged Canister Vacuum

I need to replace the power cord.


You need to remove the handle and the front housing then you'll see where the connections meet. Then you should able to get it off and replace it. ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

How do i open canister for cord retract repair


There are four screws under the lid, and there are two additional screws under the face plate for the controls display. You'll need a thin, flat blade screw driver to "pop" the face plate off. The two additional screws that you are looking for are ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Can i fix or who would fix power cord to my vaccum


Get you some electrical tape and strip and connect the proper wire colors back. But be sure to tape each wire very well before you continue to the next. After that just tape all together. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

How do you replace the cord on an old Filter Queen


Go to the store and get a repair kit, I beleive you can strip the cord and add the new plug to it.........ask for a plug repair kit ... Filter Queen Vacuums

Replacing power cord on tristar vacuum


... Tristar Vacuums

Miele vacuum Sometimes when I hit the auto roll up cord button or even move the cord, the power vacuum goes off. I move the cord again and it comes back on. I took it apart and looked at the connection from the cord to the auto roller. These are the electrical slip on type connections and are still in good shape. There are no bends in the cord. I air dusted everthing inside, put it together (with no extra parts!). Good news..it powered up so I did not break it, but it still has the same problem.


... Vacuums

Have an older model Electrolux canister model. The electric plug is broken so I got a new plug to put on. When I cut the cord to replace the plug, the dang cord retracted into the unit. So how do I get access to the cord area so i can find the end to the cord!


Hi,\012\012You have to open the vacuum cleaner and look for the wire.\012\012It is located inside the circular wheel, where it wind itself up.\012\012Don't be afraid to open it, unless your willing to pay somebody just to install a ... Electrolux Vacuums

I need to replace electrical cord on hoover windtunnel UH70120. How do i get the cord reel off? Can i open the cord reel to replace the cord?


... Hoover Company Wind Tunnel U53019 Upright Vacuum

Bosch canister vac BSG81313. Took cover off to remove lots of hair, dirt etc from running without bag in place. Everything went back together OK, but cord reel spring went zip when cover was removed. How do I rewind the spring so there is tension when the cord is pulled out ? Wound cord back onto reel, but reel just clicks ever revolution etc...no tension when cord is pulled out of vac. Bob


The spring inside the hub of the cord wheel has escaped from the locking tab. You must completely dismantle the vacuum to access the cord wheel - take it out, reattach the spring and reassemble the unit. All you need is a phillips screwdriver, a pai ... Vacuums

Miele Red Star model S314. Cord reel is stuck. About three feet of cord is out. The rest of cord is jammed inside machine? How do I get to where the cord reel is?


It is actually simple when I tell you, Here we go... \012\012First, open the lid and take the bag, and hepa filter out of the machine. \012\012With a slot screwdriver, pry the hinges of the bag door out a little and take the b ... Miele Red Star Bagged Canister Vacuum

How to wind cord onto spring loaded retractable cord reel for a Kenmore canister vacuum. There is a metal 'U' shaped, spring loaded, piece that fits over the outer aspect of the wheel. If cord needs to get wound on under this metal band I can't figure it out and the band is like factory sealed onto the wheel. Also. I don't know which direction to feed the cord onto the wheel


What is the exact model # please?Thanks!! ... Kenmore Vacuums

Cord rewind The power cord is jammed and won't go in or out. I can't find a way to get the cover off to have a look at it. Any suggestions please? Power cord jammed won't go in or out. Can comeone tell me how to undo the casing to get to the power cord?


Which model do you have.. ... Vacuums

I own an Oreck 2310RS upright vacuum cleaner. The cord is too short for my needs. The cord I need is a two wire 25 to 30 foot cord. Where can I buy this vacuum cord and how do I connect it? Thanks, Don


You can buy one at a oreck store but i would tell you to use an extention cord ... Oreck XL2200 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0191 seconds