Having problems with your Dirt Devil M086355 Bagged Upright Vacuum ?

The brush stops spinning - Dirt Devil M086355 Bagged Upright Vacuum


Answers :

Repair Help & Product Troubleshooting for Dirt Devil M086355 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The brush stops spinning - Dirt Devil M086355 Bagged Upright Vacuum


... Dirt Devil M086355 Bagged Upright Vacuum

My sd40025 dirt devil ..it is not a upright. it is the follow along, bagless vacuum. has wonderful pick-up but the brush stopped spinning when i was vacumming my rug..i love this vacumm but it is only the third time i have used it. It is brand new. Why would the brush stop after maybe 20 minutes of total use?..please advise


... Dirt Devil SD40020 Bagged Canister Vacuum

Dirt devil vacuum cleaner--trouble vacuuming dirt and pet hair on carpeting --is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up --unless I have just put a new bag on the vacuum... Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums


Try replacing the belt. Rubber belts stretch out after about a year. ... Dirt Devil CE6100 Featherlite Upright Vacuum

Brush does not spin - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


I thought my belt went bad....which it did, however there was another issue....The brush was not turning freeley, and would hardley turn at all, which caused my belt to go bad. Apparently, there are sealed bearings in the brush that you can not get t ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

The cyclone tubes have stopped spinning. - Dirt Devil Reaction Twin Cyclone Upright Vacuum


HELLO,The electric motor has a thermal switch and is self-resetting so there\015\012is no re-set switch. Make sure the air filter for the exhaust is clean.\015\012Also make sure that the height adjustment is not too low causing strain\015\012on the m ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

Shark Euro-pro EP621 Bagless Upright Vacuum. Q regarding the brush not spinning / after troubleshooting and taking actions listed below, it now spinning for a few secs, but then stopping. Already removed hair, strings, etc. Checked that belt is aligned properly, checked that small wheel that turns belt is working (spins fine when belt removed. Oiled the turning parts a bit, that made it spin better, but still stops. It turns about 3-4 seconds then stops. If I switch it off and on again, I get ag


... Euro-Pro EP621 Bagless Upright Vacuum

Brush spins, motor heats up, container doesn't spin anymore, not sure if it is "sucking up" anything ..had it for less than a year. Why won't it vacuum? dirt devil 12 amp HEPA filter vacuum


Probably clogged, or filters are very dirty ... Dirt Devil 12 Amp HEPA Filter Vacuum Vacuum

Disassemble dirt devil brush roll - Dirt Devil UD40285 Breeze Bagless Upright Vacuum Cleaner, 12 Amp Motor, Stretch Hose,Bright Headlight,Microfresh Filtration,13" Cleaning Path,25 Cord


... Dirt Devil UD40285 Breeze Bagless Upright Vacuum Cleaner, 12 Amp Motor, Stretch Hose,Bright Headlight,Microfresh Filtration,13" Cleaning Path,25 Cord

My dirt devil steam mop is not steaming - Dirt Devil CE7150 Easy Steamer Deluxe Bagged Upright Vacuum


... Dirt Devil CE7150 Easy Steamer Deluxe Bagged Upright Vacuum

The brush stopped spinning on my dirt devil breeze, How can I repair it?


... Dirt Devil Breeze Bagless VacuumVacuum

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum

My DC07 Animal Bagless Upright Cyclonic Vacuum has a small attachment for vacuuming carpeted stairs. This attachment is currently not spinning its internal brush necessary to pickup the dirt on the stairs. The rest of the vaccum is working fine. The suction cap on this attachment is pulled out, as it should be. I have checked the vacuum over thoroguhly and there are no bloackages anywhere.


Make sure to extend the wand straight up and completely out of the handle and watch that you don't kink the hose. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Oreck upright brushes not spinning - Oreck XL21 Bagged Upright Vacuum


... Oreck XL21 Bagged Upright Vacuum

Hoover Bagless Hello,      My Hoover bag less (Model U5280-900) is not picking up dirt like it should.  The brush roll is spinning fine, but the bristles on it are only about one quarter inch long.  I am wondering how long they should be.  The vacuum is quite a few years old.  Do you think it is time to replace the brush roll.  Could you email me at [email protected] about this topic.  The product bar below did not contain my model no.  The correct model no. is above in my message.  Thanks


If the belt is more than six months old then change it even if it is not broken. then replace your filters if that doesnt work than check the hoses for a clog drop a marble down them and make sure it comes out. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

My Dirt Devil Envision Upright Bagless Vacuum just stopped running...help


... Dirt Devil Envision Vacuum Cleaners

Dirt devil Royal Envision Model #UD4260 Upright vacuum brush is not turning


... Dirt Devil Vacuums

Wont shut off when I press the power button - Dirt Devil Featherlite Deluxe Bagged Upright Vacuum


I need to know how to change the belt on a Dirt Devil Upright Feather Lite Deluxe Vaccum cleaner; unable to find the manual. ... Dirt Devil Featherlite Deluxe Bagged Upright Vacuum

My brush won't spin, and won't **** well - Kirby G6 Bagged Upright Vacuum


U need a new band inside they break and it stops the brushes spinning ... Kirby G6 Bagged Upright Vacuum

The brush does not spin when shapmooing - Kirby Ultimate G Bagged Upright Vacuum


Turn it upside down, see if you can the belt that driven up the motor gear, maybe it is mis allign or loosen. if it need a replacement then have it replace ... Kirby Ultimate G Bagged Upright Vacuum

The roller brush at the bottom of the vacuum is not spinning, hence it isn't picking up the dirt. I am unable to find a way to access it so that I can see what is stopping it from turning. Can you help me?


Hello. uUsually when the roller brush stops spinning the belt is broken. TIp the machine upside down and look for several screws which hold the bottom together. Mark the location of each screw when you remove it as different lengths are common and ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Brush not turning - Dirt Devil Classic M08100 Bagged Handheld Vacuum


Did you check the belt? The most obvious problem is that the belt has come off of the shaft or it is broken. ... Dirt Devil Classic M08100 Bagged Handheld Vacuum

My dirt devil serve suddenly stopped picking up while vacuuming. I changed the bag but the problem still persists.


... Dirt Devil M130100 ''i'' everclean Dual Cyclonic Upright Vacuum Cleaner Vacuum

My brushes stopped spinning. what do i do? - Hoover SteamVac F5914-900 SpinScrub Upright Vacuum


You simply just need to change your belt. This models uses Hoover belt # 40201160 and can be found at www.vacbelts.com. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Brush heads won't spin - Bissell 3522 PowerForce Bagged Upright Vacuum


Your belt is stretched, worn or broken and therefore not turning the brush. Here is a link for the replacement belts you need and the manual which has instructions: ... Bissell 3522 PowerForce Bagged Upright Vacuum

I have a hoover windtunnel upright vacuum bought it a few months ago and now the brush spinning stopped working.


You probably have a broken belt, or the belt came off. The Self Propel Windtunnel has an issue with the pulley that tightens the V-belt in place getting stuck and needs to be taken apart and released, but most l ... Hoover Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1232 seconds