Having problems with your Dirt Devil M086700 Vision Bagless Upright Vacuum ?

When I vacuum the floor dirt falls out on the floor


Answers :

Blockage in the hose sounds like the culprit remove the hose and inspect, push a broom stick through it while off and push a open coat hanger through the canal where the hose connects, if not the filter must be blocked
Repair Help & Product Troubleshooting for Dirt Devil M086700 Vision Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Eureka Boss Power Plus and the beater bar is rolling, the belt is turning, but after vacuuming up around the litter box (not a lot of litter), when I turn the vacuum off, the litter, or even household dirt, falls out. When I hold the vacuum back to turn it off so that it doesn't fall on the floor, it's sitting in the cubby where the wheels are. The bag is empty, the hose is not plugged, the hose is securely fitted on both ends of the unit. This vacuum was purchased in July and is being


Even though the brush is spinning, you probably need to replace the belt because it is s ... Eureka Vacuums

When I vacuum the floor dirt falls out on the floor


Blockage in the hose sounds like the culprit remove the hose and inspect, push a broom stick through it while off and push a open coat hanger through the canal where the hose connects, if not the filter must be blocked ... Dirt Devil M086700 Vision Bagless Upright Vacuum

Dirt devil vacuum cleaner--trouble vacuuming dirt and pet hair on carpeting --is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up --unless I have just put a new bag on the vacuum... Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums


Try replacing the belt. Rubber belts stretch out after about a year. ... Dirt Devil CE6100 Featherlite Upright Vacuum

New panasonic ez bare floor vacuum mc-ul675 is top heavy. when I have it standing upright if always falls backwards. No matter what I try it still falls. Great vacuum other than that issue


... Panasonic Vacuums

Need Kirby Generation 3 Vacuum cleaner manual. Vacuum is not picking up dirt from floor. Seems to have enough suction to inflate the bag, but when you check the suction under the vacuum, there seems to be extremely litle suction.


If your brush roll is turning and your bag is not overly full, then the only other thing it can be is a clog where the bag connects to the vacuum. Turn the plastic part out away from vacuum and lift off to see if you have something clogging it. It ... Kirby Generation 3 Bagged Upright Vacuum

I recently ( approx. 2-3 months ago ) purchased a dirt devil. Now it is not picking up properly. When I push vacuum forward it picks dirt up a little bit, when I pull it back all the dirt falls out of the bottom. I replaced the filter today and it has not solved my problem. I dont know where my warranty is. Can you please help me?


Hi sounds like your line is stopped up somewhere , check ur suction an make sure your brushes are spinning, if they are try a wire clothes hanger to the hose at the bottom hose to dislodge anything that mite be stuck ... Dirt Devil Vacuums

Vacuum I have a dirt devel purpose for pets vacuum. It has worked well previously. The vacuum has started spitting out debris from the bottom when slightly lifting from one floor to the next. What could be causing this. Thank you


You may have a clog in the dirt inlet by the brush roll, and also the hose. ... Vacuums

When i turn on vacuum it spreads the dirt i am trying to pick up all over the floor, then a need to revacuum the floor. Pls help.


Sounds like you need to change bag and clean out hose and dirt channel underneatch behind brushroll. ... Eureka 4700A Maxima Bagless Upright Vacuum

Regarding my Kirby Generation 3 upright vacuum cleaner: the handle does not lock into place, but rather falls to the floor. Any thoughts on how to get it to stay in place? Also, I lost my owner/operator manual. Can I download one to learn how to clean and maintain the vacuum?


The plate that catches the handle to lock has a hidden spring behind that plate.I would leave it alone for the unit is pressed together. Used ones are found most everyday on Ebay. The owners manual maybe found on this website\015\012\015\ ... Kirby Generation 3 Bagged Upright Vacuum

My vacuum doesnt **** dirt from the floor but sucks dirt with the nozzle.


Probably have a clogged intake from the beater bar thru to the vac system.. Try this.. with the vac unplugged, flip the vac over so you can get to the bottom of the vac head near where the brush rotates.. then depending on the model.. remove the cove ... Eureka Vacuums

I need the dirt devil floorkeeper manual. - Dirt Devil CE5500 Floor Keeper Upright Wet/Dry Vacuum


... Dirt Devil CE5500 Floor Keeper Upright Wet/Dry Vacuum

The carpet and floor vacuuming function is really weak. It pushes the dirt around more than it picks-up. The hose attachment has lots of vacuuming power. Scott Macaulay


Hi,Here is a tip that I wrote about my Bissel but I bet you have the same problem and the hose is clogged...Bissell Bagless Upright ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The Dirt Sensor lights will not go out. It doesn't matter if I am vacuuming carpet or tile floor, the dirt sensors are all lite up. I can't locate my owners manual.


Your machine could be clogged, check the tools for suction. If its a bag less model you might need to clean or replace your filters. ... Kenmore Vacuums

I have a power drive baggless vacuum cleaner...it runs well, but suddenly it seems to have lost most of the suction coming through the hose and floor area. When I remove the dirt container, the suction below it seems strong. I have had it to repair twice--they have tuned it up and replaced all filters and belt. It still does not pick up well when I vacuum or use the hose. Can you help ?


There is something stopping it up,you will have to dissasemble the unit to find the blockage,this is the most likely problem. ... Hoover U6660-900 WindTunnel Bagless Upright Vacuum

Cannot hook vacuum floor section when carrying. Falls vertically


Part # S-706. I found it at http://www.vacsrus.com/CartGenie/prodInfo.asp?pid=96&cid=28, but did not purchase it yet. ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

I have a Bissell Lift-Off Revolution upright vacuum cleaner. The dirt is sticking around the black round sponge filter which is in the upper part of the cleaner. It isn't falling into the bowl like it should. What could be the cause of this?


Thats what its supposed to di i suggest to clean that filter after every couple of uses to prevent any problems in the future ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

I am using a Dirt Devel upright vacuum. How do you start the suction of the hose for upholstery etc. as opposed to floors.


There maybe a dial to turn the floor suction to the hose/wand. normally these are located at th base of the machine. ... Vacuums

Vacuum will not **** up dirt from the floor. The hose works fine. There is also a burning rubber smell when I use it.


This sounds like your roller has stopped causing the belt (s) to burn. The problem is definitely in the foot of the vac. You will need to take the bottom plate off to investigate further. ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

When i vacuum the dirt and particles are not going into the windtunnel container-appears to be cleaning floor but isnt making it into the container.filters are checked and cleaned.less than 6 months old


If there is no obvious clog in the unit, you might want to check the beater brush and the drive belt.\015\012Be sure the belt is not broken and be sure the beater brush is free enough to rotate.\015\012If there is a broken belt it will be obvious.\01 ... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

The vacuum cleaner does not pick up anything from carpet. It does not even pick up pieces of thread laying on carpet. On tile floors it blows dirt away instead of picking it up. I've tried all the settings on the brush and nothing works. It has done this since new


Sounds like there is a clog..\015\012\015\012Usually its in the hose - look closely.. Stretch the hose out straight and look in there good..\015\012\015\012Or a clog could be in the vac close to where the hose conects to the v ... Hoover U5269910 Bagless Upright Vacuum

Water lesking from vax rapide carpet washer - Dirt Devil CE5500 Floor Keeper Upright Wet/Dry Vacuum


I have been using a vax v26 carpet cleaner and the washing water is leaking from the bottom then the solution will not come out has the pump\015\012given up? ... Dirt Devil CE5500 Floor Keeper Upright Wet/Dry Vacuum

Eureka model 5841 Whirlwind Litespeed - Brush is turning, but vacuum will not pick up most of the dirt on the floor. Barely removes anything - any idea what to do?


... Eureka WhirlWind Litespeed 5844 Upright Vacuum

I have a dirt devil featherlite bagless vacuum; model #088600. It has suction through the hose but not through the floor mode. I think there is a blockage in the hose area but cannot seem to take it apart enough to find it.


There are 3 screws 2 on the left side behind the hose and 1 on the right back by the wheel.that will take the cover off.if you need to get into the bottom there is a screw on the bottom plate in the area where it looks like the belt travels.is the br ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

Does not pick up dirt - Roomba Robotic Floor Bagless Vacuum


Is the dirt storage area full?. Does the vacuum motor run? Check the air passages for plugging. ... Roomba Robotic Floor Bagless Vacuum

I have had my Bissell 6591-X for 2 years. I hate it! No matter what I do all the fuzz, hair, whatever fills up around the upper filter before it even starts to deposit in the cup. It has done this ever since I bought it. No matter how much I take it apart, clean it, clean filters, empty the cup, nothing does any good. I spill more dirt onto the vacuum and floor than ever gets in the cup. I will never buy another Bissell.


Sure your not over filling it ? ... Bissell Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1122 seconds