Having problems with your Dirt Devil M088910 Swivel Glide Vision Bagless Upright Vacuum ?

How do I repalce the belt on Dirt Devil Swivel Glide upright vac?

\015 Can't see how to access the area of my Dirt Devil Swivel Glide upright vacuum cleaner to replace the belt. Have no manual.\015

Answers :

Four screws hold the bottom plate in place. Turn the vac upside down and remove the screws that hold the cover(bottom plate) over the brush roll in place. Remove the plate and you are there.
Repair Help & Product Troubleshooting for Dirt Devil M088910 Swivel Glide Vision Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I repalce the belt on Dirt Devil Swivel Glide upright vac?


Four screws hold the bottom plate in place. Turn the vac upside down and remove the screws that hold the cover(bottom plate) over the brush roll in place. Remove the plate and you are there. ... Dirt Devil M088910 Swivel Glide Vision Bagless Upright Vacuum

I have a Dirt Devil Swivel Glide Vac with a broken belt. I have purchased the correct belt(#4).The bottom is off and I cannot tell where the belt connects to. Please help. Jann


It connects to the left side with the little metal rod sticking out.then connect to the wooden roller. in the space without the brush on it. roll the wooden piece to check if everything moves. then put back together. ... Dirt Devil Vacuums

Need to replace belt on Dirt Devil Swivel Glide Upright-no manual


... Dirt Devil SwivelGlide Bagged Upright Vacuum

My dirt devil bagged upright(swivel glide) wont turn on..light on


\015\012its clogged that is what the light shows is that if your vacuum is clogged then that light will come on and it will shut off, i have the same vacuum and mine does not come on cause its not clogged\015\01 ... Dirt Devil SwivelGlide Bagged Upright Vacuum

Dirt Devil upright vac


Spray a little wd40 down in between the release lever and work it up an down it might just be stuck.a build up of dirt will cause it to malfunction ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

I need help replacing the belt on my Dirt Devile Swivel Glide.


Look for a silver motor shaft behind the brush roll but in line with where the belt sits. If the shaft is blackened with burned rubber or rusty, it should be polished with wet dry sand paper, XTRA Fine. Then install the correct belt onto the sh ... Dirt Devil SwivelGlide Bagged Upright Vacuum

What belt do you get for dirt devil swivel glide MVP 086420?


... Dirt Devil SwivelGlide Bagged Upright Vacuum

Dirt Devil MVP Swivel Glide turning off


... Windsor SR12 Sensor Bagged Upright Vacuum

Belt for Dirt Devil Model 086700W belt part - Platinum Force Dirt Devilroyal Upright Vacuum Belt


... Platinum Force Dirt Devilroyal Upright Vacuum Belt

Why does the belt on my vacum dirt devil - Dirt Devil M085580 Featherlite Plus Upright Vacuum


... Dirt Devil M085580 Featherlite Plus Upright Vacuum

Dirt devil jaguar belt replacement - Dirt Devil M085580 Featherlite Plus Upright Vacuum


... Dirt Devil M085580 Featherlite Plus Upright Vacuum

Change fan belt on dirt devil power reach - Dirt Devil M08245 Power Reach Bagless Upright Vacuum


... Dirt Devil M08245 Power Reach Bagless Upright Vacuum

Help!!!! i have an older model of the dirt devil bagless quick vac. and it has been working great, just last week i was vaccuming my bedroom and i accidentally sucked up a string belt that goes with one of my capris. and today i emtpied out the dirt cup but it seems the the string belt that was sucked up is not within my reach and whenever i start the vaccum i get this distinctive noise that i've never heard before. help.


It's likely wrapped around the brush\015\012pull out the roller and un tangle it ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum

How to replace wheel bracket on dirt devil. I have a dirt devil swivel glide and I took off the wheel bracket to clean out a clog and now I cant seem to get the wheel bracket back on.


... Dirt Devil SwivelGlide Bagged Upright Vacuum

How do i put a belt on my dirt devil vision - Dirt Devil M086700 Vision Bagless Upright Vacuum


Without the model number I cannot give you a link to the exact manual that will have a step by step process for user maintainable items like belts. However if you click the link below and enter your model number at the prompt you should be able to d ... Dirt Devil M086700 Vision Bagless Upright Vacuum

Replace belt on dirt devil vision - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Dirt Devil Swivel Glide


Look on the underside where the brush roller is and unplug it first then try to turn the brush roller by hand,if it turns real freely the belt is broke.you might have a clog at your intake hose at the bottom its the clear looking hose that goes from ... Dirt Devil Featherlight Bagless Upright Vacuum

Dirt devil swivel glide - no suction


Check the filter gauze on the unsud of vack where bag is if this is blocke you will not have vacuum as there will not be ventilation thro this filter should be able to feel blow of air from this vent when vacuuming up hope this helps ... Vacuums

Replace belt i need to replace the belt on an upright dirt devil 086310 vaccume but do not have a manual and can not find how to open the assy to replace the belt


On the bottom, there should be a few screws to remove to remove the plate covering the brush roll. However some may have screws on the top housing to remove the top. ... Vacuums

Dirt Devil bagless upright. sucks up dirt in the front and spits it out in the back. I have taken it apart to check for visible clogs in hoses and checked belt and rollers all of which are fine. what next?


There seems to be no vacuum drawing the debris away from the brush head. Remove the debris canister to check for air blowing into it. Check particularly, the area where the brush head pivots off of the upright portion. Hope this helps! ... Dirt Devil M110000 Bagless Upright Cyclonic Vacuum

Missing belt I have a Dirt Devil, Touchup, upright vacuum cleaner (model 084015). I need to know what belt fits this model.


Thanks for the info **** now stick it up your ***! ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

My dirt devile swivel upright seems to not be picking up dirt


Check the belt. If the belt is ok, check the hose and the hose that goes to the bottom part for blockage. Check if the filters are dirty. ... Dirt Devil Vacuums

Belt installation How do you install a #5 replacement belt on the Dirt Devil upright vacuum cleaner?


One end of the belt will go over the motor drive shaft and the other end will slip over the roller brush. Also, you can find this belt at www.vacbelts.com. ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Replace the dirt devel model M08245 belt - Dirt Devil M08245 Power Reach Bagless Upright Vacuum


... Dirt Devil M08245 Power Reach Bagless Upright Vacuum

Dirt Devil Featherlite Cyclonic Upright Belt Slipping Off


The belt loops over the motor shaft and the end of the brush roller. Over time, the brush roller becomes worn and the belt no longer contacts a flat surface so it has a tendency to move out of alignment. Some uprights have a wire guide about midway a ... Dirt Devil Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0957 seconds