Having problems with your Dirt Devil Vacuums ?

How do you chabge the belt in the dirt devil ultra swivel?


Answers :

Attached is a copy of the link for the manual. I have included the steps here, but the manual has drawings on page 10 of the manual, it will tell you how to change the belt. You will need a phillips screwdriver.
\015\012
\015\012
    \015\012
  1. Lay cleaner flat and flip cleaner to expose nozzle base. Base should lay flat end face up. To remove nozzle guard, use Phillips or Flat head screwdriver to remove the 5 screws. Arrows on diagram shows locations of screws.
  2. \015\012
  3. Lift nozzle gueard off.
  4. \015\012
  5. Be sure belt is off motor shaft. Lift and remove brushroll. Dispose of old belt.
  6. \015\012
  7. To Replace belt, Slide belt onto motorshaft
  8. \015\012
  9. Place new belt in area of brushroll without bristles
  10. \015\012
  11. With new belt in place, pull end slide brushroll into nozzle making sure that the brushroll end caps are in the correct orientation. Rotate brushroll manually to make sure belt is prperly aligned.
  12. \015\012
  13. Reattach nozzle guard
  14. \015\012
  15. Secure by aligning the 3 tabs in the base slots. Replace all 5 screws to secure nozzle guard.
\015\012
\015\012http://www.dirtdevil.com/CustomerService/Manuals/default.aspx?id=23331
\015\012
\015\012
\015\012Please rate this solution
Repair Help & Product Troubleshooting for Dirt Devil Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do you chabge the belt in the dirt devil ultra swivel?


Attached is a copy of the link for the manual. I have included the steps here, but the manual has drawings on page 10 of the manual, it will tell you how to change the belt. You will need a phillips screwdriver.\015\012\015\012\015\ ... Dirt Devil Vacuums

How do I repalce the belt on Dirt Devil Swivel Glide upright vac?


Four screws hold the bottom plate in place. Turn the vac upside down and remove the screws that hold the cover(bottom plate) over the brush roll in place. Remove the plate and you are there. ... Dirt Devil M088910 Swivel Glide Vision Bagless Upright Vacuum

I have a Dirt Devil Swivel Glide Vac with a broken belt. I have purchased the correct belt(#4).The bottom is off and I cannot tell where the belt connects to. Please help. Jann


It connects to the left side with the little metal rod sticking out.then connect to the wooden roller. in the space without the brush on it. roll the wooden piece to check if everything moves. then put back together. ... Dirt Devil Vacuums

Need to replace belt on Dirt Devil Swivel Glide Upright-no manual


... Dirt Devil SwivelGlide Bagged Upright Vacuum

How to change belt on dirt devil ultra 08230c


... Dirt Devil Vacuums

Our Dirt Devil Swivel Ultra Glide is blowing dust out of the air vents is there any solution for this problem?


... Dirt Devil M088910 Swivel Glide Vision Bagless Upright Vacuum

I don't know how to change the belt on the dirt devil ultra vision no manual


Take all the screws off the bottom to access the beater bar than slide out (belt will also be right there ) just slide a new one on...... ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

My dirt devil ultra vision is making a loud noise when turned on. I replaced the belt and cleaned the filters and the noise is still there.


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

How do you replace the belt on a Dirt Devil UD70010 Ultra Vision vacuum


... Dirt Devil UD70010RM RFB

WE HAVE A DIRT DEVIL ULTRA VISION TURBO VACUUM MOD 87800 AND ITS BREAKING BELTS AND THE MOTOR SMELLS WHEN WE RUN IT


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

How to empty my Dirt Devil Ultra Swivel Glide Bagless???


... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

What belt do you get for dirt devil swivel guide MVP model number 086320


This model uses the dirt devil style 5 belt. You can get this belt here:http://vacbelts.com/dirt-devil-style-5-belt.htm ... Dirt Devil SwivelGlide Bagged Upright Vacuum

How do I change the belt on a dirt devil ultra vision vacuum cleaner


I just changed mine and I will be blunt. First off, the design is **** on this vacume, secondly the belt was designed to break on the rusty carbon steel pully rod. Ok now that I've vented we will get down to business. On the bottom of the vacume y ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

What belt do you get for dirt devil swivel glide MVP 086420?


... Dirt Devil SwivelGlide Bagged Upright Vacuum

I need help replacing the belt on my Dirt Devile Swivel Glide.


Look for a silver motor shaft behind the brush roll but in line with where the belt sits. If the shaft is blackened with burned rubber or rusty, it should be polished with wet dry sand paper, XTRA Fine. Then install the correct belt onto the sh ... Dirt Devil SwivelGlide Bagged Upright Vacuum

My dirt devil ultra vision has NO suction on the hose and the thing practically eats belts. What could the problem be?


First of all, if it eats belts, the brush roll bearings have going - change the brush roll.\015\012Second, check your filters and for blockages ... Vacuums

Belt for Dirt Devil Model 086700W belt part - Platinum Force Dirt Devilroyal Upright Vacuum Belt


... Platinum Force Dirt Devilroyal Upright Vacuum Belt

Cant get belt on dirt devil 150 uk - Dirt Devil Vacuums


... Dirt Devil Vacuums

Belt on my dirt devil clearpath - Dirt Devil Featherlite Bagless Vacuum M085845Vacuum


... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

Dirt devil ultra vision turbo suction problem


... Vacuums

How to replace wheel bracket on dirt devil. I have a dirt devil swivel glide and I took off the wheel bracket to clean out a clog and now I cant seem to get the wheel bracket back on.


... Dirt Devil SwivelGlide Bagged Upright Vacuum

Help!!!! i have an older model of the dirt devil bagless quick vac. and it has been working great, just last week i was vaccuming my bedroom and i accidentally sucked up a string belt that goes with one of my capris. and today i emtpied out the dirt cup but it seems the the string belt that was sucked up is not within my reach and whenever i start the vaccum i get this distinctive noise that i've never heard before. help.


It's likely wrapped around the brush\015\012pull out the roller and un tangle it ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum

Change belt on dirt devil vacuum - Dirt Devil Vacuums


It largely depends on the model you have. However, you can get any Dirt Devil replacement belt here:Dirt Devil Belts ... Dirt Devil Vacuums

How do i put a belt on my dirt devil vision - Dirt Devil M086700 Vision Bagless Upright Vacuum


Without the model number I cannot give you a link to the exact manual that will have a step by step process for user maintainable items like belts. However if you click the link below and enter your model number at the prompt you should be able to d ... Dirt Devil M086700 Vision Bagless Upright Vacuum

Replace belt on dirt devil vision - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0647 seconds