Having problems with your Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum ?

Brush does not spin - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


Answers :

I thought my belt went bad....which it did, however there was another issue....The brush was not turning freeley, and would hardley turn at all, which caused my belt to go bad. Apparently, there are sealed bearings in the brush that you can not get to. If your brush will not turn, you can either spend some $$ and get a replacement. I opted to spend some time on mine, and soaked it in some Mr. Clean and water. I then sprayed brake part cleaner into both ends, and re soaked it. I then put some dish soap on either end and freed up the bearings. In between each of the steps I described above, I would try to work it by hand. I have not had a problem since, and saved some $$ too! Good luck and hope you get the same results I did;-)
Your belt is either stretched, worn or broken and therefore not turning the brush. Just replace the belt and it should work fine. Here is a link to the belts you need and a link to the manual.

Dirt Devil Vision Turbo Replacement Belts

Dirt Devil Vision Turbo Manual (PDF)
Repair Help & Product Troubleshooting for Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Brush does not spin - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


I thought my belt went bad....which it did, however there was another issue....The brush was not turning freeley, and would hardley turn at all, which caused my belt to go bad. Apparently, there are sealed bearings in the brush that you can not get t ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Manuel for dirt devil vision turbo - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Replace belt on dirt devil vision - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Dirt devil total vision hose wont work - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Vacuum has burning odor when started - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


If it smells like rubber its the belt. if it smells like electrical its the motor ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Roller doesn't turn - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


I can help. I own a Vacuum store in Hallandale Florida. You can google me at 954-454-3594. I can help diagnose over the phone to resolve the issue. ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Reattachment of spring - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

How do you replace the belt - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


Actually need a model number in order to do a search for a user's manual.\015\012I did locate this URL:\015\012\015\012http://www.ereplacementparts.com/search_result.php\015\012\015\012that shows the family of Vision Turbo units. If you ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

It is blowing dust out of the motor - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


If this is a bagless machine, then the problem is that the really fine dust that you are picking up from your floor is so small that it is going through the filter and dust cup and building up in your vacuum motor. When enough build up collects, the ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

How to put foot latch on dirt devil vision - Dirt Devil M088905 Vision Bagless Upright Vacuum


... Dirt Devil M088905 Vision Bagless Upright Vacuum

How do i put a belt on my dirt devil vision - Dirt Devil M086700 Vision Bagless Upright Vacuum


Without the model number I cannot give you a link to the exact manual that will have a step by step process for user maintainable items like belts. However if you click the link below and enter your model number at the prompt you should be able to d ... Dirt Devil M086700 Vision Bagless Upright Vacuum

My vacuum cleaner is blowing out dirt - Dirt Devil M086700 Vision Bagless Upright Vacuum


Change filters ......01179512835 ... Dirt Devil M086700 Vision Bagless Upright Vacuum

Is there a reacll for the dirt devil ultra vision turbo bagless vacuum?


... Vacuums

Dirt devil vacuum cleaner--trouble vacuuming dirt and pet hair on carpeting --is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up --unless I have just put a new bag on the vacuum... Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums


Try replacing the belt. Rubber belts stretch out after about a year. ... Dirt Devil CE6100 Featherlite Upright Vacuum

The brush stops spinning - Dirt Devil M086355 Bagged Upright Vacuum


... Dirt Devil M086355 Bagged Upright Vacuum

I need an owners manual for Dirt Devil bagless vision turbo vacuum.


Go here to download the manual > http://dirtdevil.com/search/?q=M085845&t=Manuals ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

WE HAVE A DIRT DEVIL ULTRA VISION TURBO VACUUM MOD 87800 AND ITS BREAKING BELTS AND THE MOTOR SMELLS WHEN WE RUN IT


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

My sd40025 dirt devil ..it is not a upright. it is the follow along, bagless vacuum. has wonderful pick-up but the brush stopped spinning when i was vacumming my rug..i love this vacumm but it is only the third time i have used it. It is brand new. Why would the brush stop after maybe 20 minutes of total use?..please advise


... Dirt Devil SD40020 Bagged Canister Vacuum

I have a Dirt Devil M088400 - Vision Turbo Vacuum. A spring fell from the bottom and the carpet height adjust isn't working. The rollers under the unit won't stay in place either. Can you tell me how to put the carpet height adjust back together?


The roller attaches to wheels. There is a spring that attaches from roller to hight adjustment selector which is a plastic peice with a little hook on bottom that spring attaches to. Both peices should have a hook that the spring ttaches to. ... Dirt Devil Vacuums

How do i change the filter? - Dirt Devil M086700 Vision Bagless Upright Vacuum


... Dirt Devil M086700 Vision Bagless Upright Vacuum

The cyclone tubes have stopped spinning. - Dirt Devil Reaction Twin Cyclone Upright Vacuum


HELLO,The electric motor has a thermal switch and is self-resetting so there\015\012is no re-set switch. Make sure the air filter for the exhaust is clean.\015\012Also make sure that the height adjustment is not too low causing strain\015\012on the m ... Dirt Devil Reaction Twin Cyclone Upright Vacuum

How do you change the belt - Dirt Devil M086700 Vision Bagless Upright Vacuum


On the bottom of the vacume you should see about 4 screws ( philips ) that hold the plate in place, remove the screws and plate and this will expose the motor shaft,belt and roller ( you should also see the broken belt there two ) -- pop out the roll ... Dirt Devil M086700 Vision Bagless Upright Vacuum

How do you repair the height adjust lever? - Dirt Devil M086700 Vision Bagless Upright Vacuum


... Dirt Devil M086700 Vision Bagless Upright Vacuum

Durt Devil upright 12 amp Vision Vacuum Cleaner


If there no blockages in the hoses, then the next thing to check would be any filters in the vacuum. When these get clogged, you will experience this problem.\015\012\015\012Dave ... Vacuums

Dirt devil vacuum shuts off - Dirt Devil M1100009 Reaction Soft Touch Cyclonic Upright Vacuum Cleaner Vacuum


... Dirt Devil M1100009 Reaction Soft Touch Cyclonic Upright Vacuum Cleaner Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0943 seconds