Having problems with your Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum ?

How do I change the belt on a dirt devil ultra vision vacuum cleaner


Answers :

I just changed mine and I will be blunt. First off, the design is **** on this vacume, secondly the belt was designed to break on the rusty carbon steel pully rod. Ok now that I've vented we will get down to business. On the bottom of the vacume you will find a plastic housing thats covering the brush. It will have 4 screws around the brush plus one above them. The housing itself is shaped like an L. Remove all the screws and expose the bare brush. This was not my case but there should be a belt holding the brush to a small steel pully rod in the top part of the L indention. If not then just locate an indention on the brush where the belt will be placed and look directly beneath that to find the pully rod (probably about 6 inches beneath the indention on the brush). wrap your new belt around the metal pully rod and then take out the brush. Wrap the other end of the belt around the indention on the brush and pull up hard and replace the brush in its vacume housing. This will take some effort as the belt has to be stretched. When finished replace the housing cover with the five screws and boom you're done.
Repair Help & Product Troubleshooting for Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I change the belt on a dirt devil ultra vision vacuum cleaner


I just changed mine and I will be blunt. First off, the design is **** on this vacume, secondly the belt was designed to break on the rusty carbon steel pully rod. Ok now that I've vented we will get down to business. On the bottom of the vacume y ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

HOW DO YOU CHANGE THE BELT ON A DIRT DEVIL VISION VACUUM CLEANER?


With the vacuum unplugged, turn the machine beater bar side up. Locate the clips or screws that hold the plate over the beater bar and remove the plate. The beater bar sits in sockets just inside. Be careful in removing it; take your time and note ... Dirt Devil M088910 Swivel Glide Vision Bagless Upright Vacuum

Replace belt on dirt devil vision - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

I don't know how to change the belt on the dirt devil ultra vision no manual


Take all the screws off the bottom to access the beater bar than slide out (belt will also be right there ) just slide a new one on...... ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

How do you replace the belt on a Dirt Devil UD70010 Ultra Vision vacuum


... Dirt Devil UD70010RM RFB

How do you change the belt - Dirt Devil M086700 Vision Bagless Upright Vacuum


On the bottom of the vacume you should see about 4 screws ( philips ) that hold the plate in place, remove the screws and plate and this will expose the motor shaft,belt and roller ( you should also see the broken belt there two ) -- pop out the roll ... Dirt Devil M086700 Vision Bagless Upright Vacuum

How do I change the belt for my dirt devil vacuum cleaner? It blows out dust.


To change the belt, take off the bottom plate, the belt runs between the brush roll and the motor shaft. But if it is blowing out dust, you may have a clog in the dirt inlet by the brush roll, or in the hose. ... Vacuums

WE HAVE A DIRT DEVIL ULTRA VISION TURBO VACUUM MOD 87800 AND ITS BREAKING BELTS AND THE MOTOR SMELLS WHEN WE RUN IT


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

How do i put a belt on my dirt devil vision - Dirt Devil M086700 Vision Bagless Upright Vacuum


Without the model number I cannot give you a link to the exact manual that will have a step by step process for user maintainable items like belts. However if you click the link below and enter your model number at the prompt you should be able to d ... Dirt Devil M086700 Vision Bagless Upright Vacuum

Change belt on dirt devil vacuum - Dirt Devil Vacuums


It largely depends on the model you have. However, you can get any Dirt Devil replacement belt here:Dirt Devil Belts ... Dirt Devil Vacuums

My vacuum cleaner is blowing out dirt - Dirt Devil M086700 Vision Bagless Upright Vacuum


Change filters ......01179512835 ... Dirt Devil M086700 Vision Bagless Upright Vacuum

Change fan belt on dirt devil power reach - Dirt Devil M08245 Power Reach Bagless Upright Vacuum


... Dirt Devil M08245 Power Reach Bagless Upright Vacuum

Dirt Devil Featherlite how to change belt - Dirt Devil Featherlite Bagless Vacuum M085845Vacuum


... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

Is there a reacll for the dirt devil ultra vision turbo bagless vacuum?


... Vacuums

Hi I have a dirt devil vision. Hose works, but does not vacuuming the floor. Belts are not broken. Larger belt is moving, smaller belt that moves the brushes does not.


Hi krueger, sorry for the problems but hers an idea how about turning on the vacuum and put your hand under the part where it sucks uo the dirt off the floor and i guessing you would have a little suction, since the brushes are not moving its going t ... Dirt Devil M086700 Vision Bagless Upright Vacuum

Missing belt I have a Dirt Devil, Touchup, upright vacuum cleaner (model 084015). I need to know what belt fits this model.


Thanks for the info **** now stick it up your ***! ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Belt installation How do you install a #5 replacement belt on the Dirt Devil upright vacuum cleaner?


One end of the belt will go over the motor drive shaft and the other end will slip over the roller brush. Also, you can find this belt at www.vacbelts.com. ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

How do you replace the belt - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum


Actually need a model number in order to do a search for a user's manual.\015\012I did locate this URL:\015\012\015\012http://www.ereplacementparts.com/search_result.php\015\012\015\012that shows the family of Vision Turbo units. If you ... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

Dirt Devil Ultra Vision vacuum- no suction?


... Dirt Devil Ultra Vision Turbo Vacuum Cleaners

My dirt devil vacuum cleaner is not working - Dirt Devil M130000 ''i'' Dual Cyclonic Upright Vacuum Cleaner Vacuum


Please specify whether the vacuum motor does not turn on when you flip the switch or it simply does not have suction. ... Dirt Devil M130000 ''i'' Dual Cyclonic Upright Vacuum Cleaner Vacuum

I accidently ran over a sock while vacuuming underneath my bed and the belt broke (brush does not rotate now). I've always changed the belts in my vacuum cleaners, but the Healthy Home manual states that I need to bring it into a shop so that a professional repairman can change it. I find this ridiculous and now wish that I never bought it. How do I change the belt myself? PS I have already bought a replacement belt.


... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue

How to change the belt - Dirt Devil Vacuums


Umm..yeah "how to change the belt" is phrase in an outline, or a table of contense. how about actually asking a question, slowfuck? why do you need to change the belt? what is wrong with your brain? i mean, vacuum. head cavity. is t ... Dirt Devil Vacuums

My dirt devil ultra vision is making a loud noise when turned on. I replaced the belt and cleaned the filters and the noise is still there.


... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum

How to change belt on dirt devil ultra 08230c


... Dirt Devil Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1080 seconds