Having problems with your Dysentery 35 stick vaccuum ?

Beater bar stops and goes intermittly

How do I fix it

Answers :

Repair Help & Product Troubleshooting for Dysentery 35 stick vaccuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The motor running the beater bar on ny Electrolux canister vacuum cleaner runs intermittently. It runs about 2 minutes and then cuts off and automatically starts again after a 1 to 2 minute interval. I have tried taking it apart and removing the dust and grit in the beater bar attachment but with no change in operation. What would you suggest?


Check all the wiring connections to make sure they're tight. \015\0121/2. Wiring to power nozzle motor or reset switch is loose.\015\0121. Cord from power nozzle to upper wand. If the plastic portion of the wand is cracked near the co ... Electrolux UltraLux 2000 Bagged Canister Vacuum

My Kenmore 11635922500 Vacuum Beater bar intermittently starts stops


... Kenmore Vacuums

Beater bar works intermittently


When you push the hose into the tube, there is an acuator that will push the switch so the beater bar will turn. That switch could be just dirty, dust gets in them and they won't always work, the acuator may need to be replaced. Either that or you ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

The power goes off and on when using my vacuum. When I push my vacuum forward, intermittently it loses power.


Almost certainly there's a broken wire within the electric flex. This usually happens where there's most bending and pulling - that is, where the flex enters the machine or where it enters the plug. You'll need to get someone to either shorten the fl ... Vacuums

My electrolux sidekick, model 1562 makes a nasty screeching sound.It happens as soon as it is powered on,the noise then gets intermittent after qa few minutes and then goes away.This cycle is repeated evry time i use it.I have checked it for binding and obstructions and oiled the motor.I think it's the roller brush but oiling it didn't seem to help


... Electrolux Vacuums

My Kenmore elegance small beater bar stopped rotating. there is a small metal wire that we cannot figure out where is goes back please help.model #116.22950400c


... Kenmore Vacuums

We have a Kenmore canister vacuum cleaner. the carpet cleaning attachment, I think is called the power mate has a beater that is intermittently working now


Contrary to your advice, the nozzel cannot be connected directly to the powerhead--the female openings are set closer together in the nozzel than the male plugs in the powerhead. ... Kenmore 23812 Progressive PowerMate Bagged Canister Vacuum

The beater goes off and on - Electrolux Vacuums


Might need to be re wired or some bad connection with the vacuum. ... Electrolux Vacuums

Beater brush runs intermittently - Fantom Vacums Cyclone XT Upright Vacuum


Try changing the the belt.If it is worn it could cause your problem ... Fantom Vacums Cyclone XT Upright Vacuum

When the dyson is turned on the suction goes to the wand when you tip the beater down you do not have as much suction you cant pick up lint.


The Dyson system is designed to operate the hose with the handle in the upright position. When the head is tipped down (floor vacuum position) it closes the opening to the hose/wand ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do I replace belt on hoover s1147 twist & vac? I know it goes on the middle of the beater bar but I cant see where to attach the other end to.


... Hoover S1147 Twist Vac Handheld Vacuum

I was going to send my animal in for repairs but after waiting a week Dyson sent the wrong box. The beater bar only works intermittently and the thing roars.


Hi there,I am very sorry to hear you are having difficulty with your machine. I apologize for the error regarding your box. However, we would appreciate the opportunity to assist you further in this matter. Based on the details you provided, ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I have a multifunction robotic auto vacuum cleaner model number XR210. It doesn't seem to be charging when at the docking station. The light is flashing on the docking station as if it was charging, but then I am getting intermittent noises like the vacuum is about to start up, then it beeps and goes silent again. I have emptied the machine. The display does not read 88 as if there is a malfunction, so I'm really not sure what's wrong with it. If I put the vacuum to the docking station the displ


... Vacuums

Dyson DC18 brush beater bar intermittent failure problem.


Take it in to be serviced. It could be a dead motor to bad connection. 5yr warranty will leave you paying nothing. Best Buy or local authorized service center can do it. ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

Beater bar dyson vacuum Works intermittently - Vacuums


... Vacuums

On our Hoover U6445-900 (Mach 6.9) we replaced the small belt that goes to beater brushes in front of unit. Upon starting, the Hoover quickly got hot and smoky. We shut it off and looked things over carefully, but the second try also resulted in friction heat on the belt. Now it appears the belt may have stretched due to heat and the brushes won't spin. Any ideas?


Are you sure you purchased the right size belt..the friction you speak of is usually caused by a belt not being the right tightness or a jammed beater brush ... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

The beater of my kenmore vacuum won't turn on - the primary light goes on but none of the sensor lights go on.


Kenmore vacs generally have three male contacts at the machine end.Internally when the hoses swivels these contacts run on three brass rings which can also get dirty due to proximity to dirt. They can get dirty or dirt can fall into the corresponding ... Kenmore 22812 Bagged Canister Vacuum

Cyclone does not function, no suction at the beater head.


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Has anyone figured out what the silver cylinder is that can fall out when you're cleaning the beater bar?


Hi there,I'm sorry to hear you're having difficulty with your DC17 Animal. If the idler has fallen out of your machine, I'd encourage you to get in touch with us directly, as we'd appreciate the opportunity to provide further assistance. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC35 beater bar stays on when power button isn't pushed


... Dyson DC35 Multi Floor Digital Slim Cordless Vacuum

Problem with bosch bsg71360 beater bar going in and out of operation / power


... Bosch BSG71360UC Bagged Canister Vacuum

Blue moon works intermittently


Take the hose handle apart and look at the bottom side of the switch circuit board. Sometimes a contact or 2 break loose from the solder and will work intermittenly. Resolder the contacts if this is the case, put back together and try again. ... Vacuums

DC07 Dyson clutch not engaging, thus carlperr beater not turning


As far as I am aware, the clutch mechanism cannot be dismantled, and even if it can, I dont know of anywhere to get individual components.\015\012DC07 clutches are avaible on eBay reasonably cheaply, so best fit a new one. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Unit powers up but beater bar does not rotate


Have you checked the belt that drives the beater bar? ... Kenmore 22812 Bagged Canister Vacuum

G5 intermittently or not at all pulling up dirt


Turns out that little light is a BELT indicator. Even though the belt wasn't broken it had stretched and needed to be replaced. So a $2 part and my baby is working as well as ever!! ... Kirby G5 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0379 seconds