Having problems with your Dyson Bagless Upright Vacuum DC41 Animal ?
Broken dyson dc41 belt
\015 I took apart the dyson and found my belt was broken. I look on dyson's site for a part, but couldn't find one. They want me to buy the whole cleaner head assembly. The part number on the belt read \012"20724-01-01" I have been looking online for it without any luck, I'm hoping someone here can help. Thanks in advance.\015
Try looking at http://www.crucialvacuum.com/dyson-dc41-belts-2pk.html
Also Amazon sells the same one through Crucial vacum
Also Amazon sells the same one through Crucial vacum
If you are in the UK, they are also on our site: http://manchestervacs.co.uk/Dyson/DC41-belt-20724-01-01
Repair Help & Product Troubleshooting for Dyson Bagless Upright Vacuum DC41 Animal
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Broken belt dyson Dc41
Belt was broken, so I had to go inside the motor assembly -- torx screws all the way. The problem is finding a replacement belt without buying a whole new power drive. ... Vacuums
Broken dyson dc41 belt
Try looking at http://www.crucialvacuum.com/dyson-dc41-belts-2pk.html Also Amazon sells the same one through Crucial vacum ... Dyson Bagless Upright Vacuum DC41 Animal
Dyson dc19 ts turbine belt is broken
I have a dyson root cyclone. i dismantled it to replace the belt, it is not the belt which is on the roller brush, it is the belt which is from the motor, it was easy to take out as it was broken, i will get new one tomorrow now im wondering how do i fit it in.
The belt that fits on the motor is the same belt that drives the roller brush, all you need do to gain access is remove the sole plate, normally attached with 3 quarter turn connectors, use large flat screwdriver to turn them ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Broken belt Where can I purchase a replacement belt? Is it Dyson specific or will a generic one do?
I would recommend using the genuine belts. There should be a sticker with a telephone number on it on your Dyson to call for replacement parts. If there is no sticker, go to http://www.d ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Beater bar not spinning on my dyson animal DC14. Motor turns on and sounds good. My belt is not broken, and still tight on the bar. It looks like another possible belt or gear box between motor and bar. Can anyone please point me to next step?
... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
Ratchet noise, beater will not turn, belt not broken, in carpet mode the Dyson d07 makes huge ratchet noise and the belt will not turn the beater brush.
Ok, so I had the same ratching noise and took the advice of many sites directing me to clean the brush. But like most I cleaned the brush and the noise continues and the brush does not spin. Reluctant to take it to get serviced I dug a l ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
We have a dyson dc14 and the beater bar stopped turning, we cleaned the bar off and checked the belt and it's not broken, I know I called Dyson a year or two ago and they told me how to reset the beater bar motor but I don't remember exactly what I did, anyone know the answer to this??? thanks in advance....
Hi its Darran at Dyson.Check that the brush control dial is in the centre position when the machine is locked upright. When you release the head and pull the handle back this dial should mopve forward to the on position. Once here, the ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
I got a plastic bag caught in the DC17 Dyson Vacuum. It will not turn now. I do not think it is the belt, as it is there and not broken. The belt and/or the roller is not turning
You need to remove the plastic bag.thats stopping everything ... Vacuums
Dyson 17 Brush Belt Broken
There is also an updated beater bar that accepts a wider belt, dyson sent it to us for free ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Dyson Animal 07 beater bar not spinning - belt not broken
If your unit has a clutch it maybe that it is in the off position or the motor belt is broken your unit has to belts if its a clutched model ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Belt not turning, it is not broken - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
The shaft that makes the belt spin is most likely not spinning. Take it into a vacuum shop ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
My purple and red Dyson has become hard to push. Could a belt have broken?
It's simple to tell if a belt has broken. Just switch the machine on and have a look (look, don't feel) to see if the brush roller is rotating. If it is, then the belt is not broken.\015\012\015\012Depending on how much use your machine has had ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Is there a reset button on the dyson animal. How do you change the belt. It is not broken, but not rotating.
Depending on the manufacture date (older/newer), the older version are very hard to change and should be taken to a repair shop as there is a good chance of breaking something if your don't know how to do this. I repair and sell vacuums, have for 1 ... Dyson Vacuums
The roller on my Dyson vacuum has stopped rotating (I still have suction) I have checked the belt (not Broken) and have checked and cleaned the roller and spindle and also checked the "auto" button setting on the vacuum but to no avail ... Anybody have any clue as to the problem Many thanks
... Dyson DC07 Bagless Upright Cyclonic Vacuum
Brush on Dyson does not turn ....belt not broken
Hi.\015\012\015\012Your machine has 2 belts one goes clutch to brush roller second is motor to clutch.\015\012\015\012You need to remove the clutch unit from the machine & replace the motor to clutch belt.\015\012 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
Dyson animal brush will not turn but the belt is'nt broken
I have found that the belt for the DC17 is about .100" too wide to properly fit around the cogs on the beater bar, I took a sharp pair of scissors and cut of the edge and it seems to solved the problem of the "stalling beater bar" ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
DYSON DC04 ROLLER WONT GO ROUND BUT THE BELT ISNT BROKEN
The clutch is out this is a part that must be replaced by a vacuum shop as it requires special equipment. ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum
We have a Dyson DC28. The brush no longer turns while vacumming the carpets. Also, the lights on the handle to adjust for different heights do not work. Can you help. I see of no way to get to the belt but I don't think it is broken.
Hi there,I'm sorry to hear you're having difficulties with your DC28. It's probably best if you get in touch with us directly so we can resolve this issue for you as quickly as possible. If a repair is necessary, this should be covered by our ... Dyson DC28 Animal Bagless Upright Vacuum
Fan belt broken needs changing - Dyson Vacuums
You can get replacement Dyson belts here:http://www.vacbelts.com/dyson.htm ... Dyson Vacuums
For my dyson upright, the roller is not spinning but the belt is not broken. Do you know what causes this?
Brush doesnt turn belt isnot broken - Dyson DC28 Animal Bagless Upright Vacuum
Hi there,I'm sorry to hear you're having difficulties with your DC28. It's probably best if you get in touch with us directly so we can resolve this issue for you as quickly as possible.You can call us free on 1866MYDYSON - or if you ... Dyson DC28 Animal Bagless Upright Vacuum
The belt is broken on our Hoover Allergen Filtration Model U5018-900 120 v. 60 Hz 12.0 A. Belt 38528040. Where can I get the belt and instructions on how to replace the broken belt?
The owner's manual can be downloaded here (in red, "Download the Instruction Manual (PDF))\015\012http://www.hoover.com/product.aspx?model=U501 ... Hoover U5018-900 Bagged Upright Vacuum
Dyson Animal dc07 -- change belt
Read the manual -- available on the Dyson web site. Brushbar not spinning • Ensure brush control is set on carpets mode. Note: brushbar will only spin when the handle is reclined. ... Vacuums
Broken belt I have a royal canister model 4750 with a broken belt on the power head. I don't know how to disassemble the head to get at the belt.
If you have the power head with the headlight, squeeze the sides of the upper part (almost like a superstructure,) where the headlight is located. It should lift off, allowing access to the screws to get the powerhead apart the rest of the way, and o ... Vacuums