Having problems with your Dyson Ball DC24 Bagless Upright Vacuum ?

Dyson DC 24 pick up head wont spin

\015 I press the brushes on/off switch and the little red button thing on the side fo the head itself (whatever thats supposed to do), but the head seems to only spin when it wants to.\015\012\015\012I see lots of folks with the same proble here. Any ideas?\015\012\015\012Thanks.\015

Answers :

- Look for the reset button on the side of the brushbar housing - there should be a red sticker and a red button. Push it once. It's
\015\012not gonna stay depressed, it's gonna pop right out - that's normal.
\015\012- Step on the red pedal on the back
\015\012- Turn the machine on with the red power button
\015\012- Press the gray button next to the red power button - this is the ON/OFF switch for the brushbar - if it doesn't spin, press and hold the gray button down for 10 seconds
\015\012- If it still isn't spinning, remove the brushbar and make sure nothing is blocking it and withholding it from spinning
\015\012- For further troubleshooting assistance call the Dyson helpline, they know what they're doing
The DC24 dies not have a belt drive. The roller brushes work on the vacuum air pressure. This is switched on and off using a micro switch next to the power switch. The grey button next to the red one sometimes sticks so it won't reach the micro switch underneath to start the brushes. I removed the surrounding plastic on mine using the three star shaped headed screws on the rear panel behind the power switch. I checked the micro switch by pressing it a few times and sprayed a little lubricant silicon grease around the moving switch parts. It took about 20 mins in all. The design could be better as it relies on a long thin plastic pointer to depress the micro switch. It it fails again I will bypass the switch by adding a wire loop between the two contacts of the micro switch. This will keep the brushes rotating whenever the power is on.
Repair Help & Product Troubleshooting for Dyson Ball DC24 Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson DC 24 pick up head wont spin


- Look for the reset button on the side of the brushbar housing - there should be a red sticker and a red button. Push it once. It's \015\012not gonna stay depressed, it's gonna pop right out - that's normal.\015\012- Step on the red peda ... Dyson Ball DC24 Bagless Upright Vacuum

Dc31 motorized brush head wont stay spinning - Dyson DC31 Animal Bagless Handheld Cyclonic Vacuum


... Dyson DC31 Animal Bagless Handheld Cyclonic Vacuum

Miele, Flamenco II. 2 probs. 1. the head brush is not turning when I put it on the floor. If I pick it up to look inside...the brush is spinning fast..I put it down on the floor...the head does not spin at all. 2. The suction power has dropped significantly. The suction used to be so intense, the head would **** itself to my floor and hold on...now, hardly any suction at all.


Sounds like the belt is not on correctly on the beater brush or the belt is worned out now for the suction check filters or bags that need to be empty or clean ... Miele Vacuums

Poor Suction Heya! So I just picked up a used Dyson, but when I vacuum with it, the suction is pretty weak and it spits all kinds of stuff out the back and into my feet. When I pull the hose I have good suction, but in regular mode it hardly picks up anything. The brushes are spinning, and it eventually will clean an area if I go over it again and again. Maybe a clog somewhere? Please tell me that Dysons have better suction than my $50 Dirt Devil! Thanks!


I recently bought a second hand Dyson DC07. Its suction was poor. I removed all the un-clipable pipe bits and to remove any blockage but it all looked clear. The Final Sponge and hepper filter did have a lot of dust in it and the rotating brush was f ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Turbine head of my Dyson DC08 does not spin


This response is likely too late coming, however for others the problen appears to be the same as the fault with my turbine head which was that the turbine fan had become loose on its spindle. With no pressure on the brushes, friction would allow the ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson DC22 brush wont spin, does not appear to be getting power


Hi there,I'm sorry to hear you're having difficulties with your DC22. If you've been unable to get the Motorhead working after cleaning it, please get in touch with us directly so we can provide further assistance. You can call us free on 1-8 ... Dyson DC22 Motorhead Canister Vacuum Bagless Cyclonic Vacuum

My dyson ball wont pick up


You may have a blockage in the machine or the internal hose has become dislodged. Call the Dyson helpline for a thorough troubleshoot and solution. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Power head on my Dyson Animal DC39 will not stay spinning. Suction Issue?


There should be a red insert on the right-hand side on the cylindrical bulge behind the brush cylinder. Check that this is moving when you push the button. The red insert should stay pushed in for the brush to rotate. The insert moves in an out as we ... Dyson DC39 Animal Canister Vacuum

The brush bar wont spin on my dyson dc 25... i


Hi its Darran at Dyson.Simply switch the machine off and stand it upright. Press the brush bar on/off switch once and then turn the machine back on. When you release the machine into the vacuuming position, the brush bar shoul ... Dyson Ball HEPA Upright Bagless Vacuum - Iron/Satin Yellow

My dyson dco4 wont pick up when upright


Check the internal pipe underneath is not split ... Dyson DC07 Bagless Upright Cyclonic Vacuum

My dyson cyclone assembly will not spin when it picks up dirt.


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=34171&thid=680773\015\012My dyson cyclone assembly will not spin when it...\015\012Posted by littleladysc on Jun 18, 2008 ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The dyson spin wheel that picks up dirt does not spin


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc33 brush bar wont spin - Dyson DC33 Multi floor Upright Vacuum Cleaner Blue- Refurbished


... Dyson DC33 Multi floor Upright Vacuum Cleaner Blue- Refurbished

Dyson head brush not spinning hair caught - Dyson DC26 Bagless Canister Cyclonic Vacuum


... Dyson DC26 Bagless Canister Cyclonic Vacuum

Dyson ball head wont sit flat on floor - Dyson DC25 All Floors Bagless Upright Vacuum


... Dyson DC25 All Floors Bagless Upright Vacuum

Dyson DC11 turbo head not spinning - it feels like the selector button has broken inside and is locked to not spin. is there a way to disasembel and maybe glue or fix the selector?


Hi Andrew, it's Jack at Dyson.With the exception of the sole plate and brush bar, the Turbine head is manufactured as a complete assembly. We wouldn't recommend attempting to dismantle it as we can't guarantee this won't cause damage. You mig ... Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum

Dyson animal dc 24 spinbrush wont spin - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

My hose tools wont pick up. when hose tools unattached suction is fine and will **** my hand fiercely, but once tool attached no suction..... how am i gonna pick up cat hair from seats now?! its a dyson DC04 but it wouldnt let me choose that!


I have a DC04 and the hose tools are a open hole.The only reason they want pick up is they are blocked.If you say they are sucking your hand when not attached.Make sure the hose is not blocked by taking off the cover at the front.Allso check the cyli ... Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum

The flexible brush on my unit does not spin. It did 'by accident' pick up a cat poo that didnt make the litter tray while I was out, (and it happily spread it all over the house and skirting boards). I cleaned the unit, removed the base and wiped everything clean. I've unscrewed the flexible brush and cleaned underneath it but it still wont spin. Any suggestions?


... iRobot Roomba 530 Robotic Vacuum

I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY tight fit...) then it wont spin. Any thoughts?


Check the roller ends for dirt build up, they pull off and you should be able to clean them out.\015\012The roller should just go back into place if pushed together. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My steamvac wont pick up the water. it is spinning and blowing out the water, but it wont **** it back in


The most common reason for lack of pick-up is that the lid is not seated firmly on the recovery tank. Lack of pick up is always caused by an air leak. A less common possibility is that the large round rubber seal that the recovery tank sits on has fa ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum

Dyson dc33 wont pick up. - Dyson DC33 Bagged Upright Vacuum


... Dyson DC33 Bagged Upright Vacuum

Dyson DC 28 brush bar wont spin


... Dyson DC28 Animal Upright Vacuum New DC 28 Animal

Dyson dc 23 turbine head is not spinning


... Dyson Vacuum Cleaner DC-23 Long Life Washable & Reusable Pre-Filter, R

Dyson dc27 wont pick up


... Dyson DC27 Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0683 seconds