Having problems with your Dyson Ball DC24 Bagless Upright Vacuum ?

My dyson won't stay on...is the power button broken?


Answers :

It's not unknown for on/off switches to fail. However we'd need more information to know for sure. Most problems of the "won't stay on" variety are caused by a damaged flex (usually at one or other extremity - close to the plug or where it enters the machine). There may be no damage visible externally, yet the copper wire inside can be broken (especially if the flex has been subjected to tugging or tight bending).\015\012
\015\012So - what do you mean by "won't stay on"? Do you have to hold the on/off button down to make it work? If so, you are right to suspect the switch. Or, does the motor cut in and out as you move the machine? If so, suspect the flex. Or, does the machine work fine for 10 minutes or so and then cut out and refuse to restart for an hour or so? If so, there's a blockage somewhere and the motor's overheating, so you need to find the blockage and clear it. Good luck!\015\012
\015\012I value your feedback, so please remember to rate this response.
Repair Help & Product Troubleshooting for Dyson Ball DC24 Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dyson won't stay on...is the power button broken?


It's not unknown for on/off switches to fail. However we'd need more information to know for sure. Most problems of the "won't stay on" variety are caused by a damaged flex (usually at one or other extremity - close to the plug or where it enters the ... Dyson Ball DC24 Bagless Upright Vacuum

My dyson dc14 wont stay running. if you hold power button down it runs. cleaned filters and brush and the belt is not broke. any advice on solving the problem?


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Power button wont stay on. have to hold the power button manually for it to stay on.


Most likely you have to replace ON/OFF switch. look at detail instructions how to do it on our website:http://www.goodvac.com/kb_results.asp?ID=18 ... Kirby Ultimate G Bagged Upright Vacuum

Dyson Animal on button wont stay on.


That's the problem with dyson. They work for the first few months then start to break down. Your switch might need replacing or your cord connection is lose and causing it to short out and turn off. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Dyson DC35 beater bar stays on when power button isn't pushed


... Dyson DC35 Multi Floor Digital Slim Cordless Vacuum

I love my dyson but it suddenly won't stay powered on! I push the on/off button and it works fine but only if I hold the button down. As soon as I take my hand away, it stops. I've had it and


Probably needs a new on/off switch here is video how to do it ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc25 power switch wont stay on - Dyson DC25 All Floors Bagless Upright Vacuum


Hi Chett,I'm sorry to hear you're having difficulty with your DC25. If the switch doesn't seem to be working correctly, I'd encourage you to get in touch with us directly as we'd appreciate the opportunity to provide further assistance. ... Dyson DC25 All Floors Bagless Upright Vacuum

Power won't stay on when power button pushed - Dyson Vacuums


... Dyson Vacuums

Dyson will not stay powered on unless power button is continuously pressed. Is this a switch malfunction or something else?


Yes, you probably need to replace the switch - call the Dyson helpline, they'll give you the info for your closest authorized repair dealer who will open it up and replace the switch for you. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

My dyson won't stay on. I push the red power button and it begins to start but as soon as I stop pushing it, it stops. It will only work if I keep pushing down the start button the whole time I'm using it. HELP!!! I love my vacuum!


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson vaccumm wont stay on it works but i have


Is it a switch or a push button? ... Dyson DC07 Bagless Upright Cyclonic Vacuum

When I push in the power button to start my Dyson DC07 pink it will not stay on. Any reason for this?


Hi its Darran at Dyson.It sounds as though the switch needs to be replaced. Please call our Helpline on 1866MYDYSON so that one of our advisors can assist you. Kind regardsDarran Dyson Customer Service ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Broken power button. stays on if you keep it pressed!


Model make please ? ... Vacuums

Dysin dc07 the power button is broken - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Switches are available if you search on eBay for a few pounds, and if you've ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Power head dyson 25 wont stay upright in transport mode


The lock / change over valve is loos or damaged, I would recommend taking to an authorized Dyson service center.(Authorized service centers will sell Dyson vacuums, if they do not sell NEW Dyson vacuums then chances are the are no Authorized by Dyson ... Dyson DC25 Vacuum

Switch has power but wont click and stay on - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


My vacuum had this exact same problem, but was out of warranty because \015\012it was remanufactured. Thankfully, it's a very quick, five-minute fix.\015\012\015\012UNPLUG The Vacuum!\015\012Remo ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Power button won't stay down. - Dyson DC25 Animal Bagless Upright Vacuum


Hi there, Sorry to hear you're experiencing a problem with the power button on your DC25.In case you haven't tried this, give the button a firm push all the way down. If this doesn't resolve the issue, please get in touch with ... Dyson DC25 Animal Bagless Upright Vacuum

My dyson wont stay on unless i hold button down


... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

When i hit the power button on my miele carina, it doesnt lock and stay on. i have to hold down the power button for the power to stay on. Please advise


Try a little WD-40 sprayed sparingly on the button. work the button a few times- may be sticky spring or contact. if that doesn't work, check with retailer where you purchased it- see if you can get a replacement switch! if you're handy, or have a ha ... Miele Carina Vacuum Vacuum

Power button not engaging...vacuum will not stay


The power button is worn out and needs to be replaced. That vacuum is pretty simple. So even if you don't know how to take it apart it shouldn't cost much to have it repaired. ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

My Power head on my Dyson Animal DC39 will not stay spinning. Suction Issue?


There should be a red insert on the right-hand side on the cylindrical bulge behind the brush cylinder. Check that this is moving when you push the button. The red insert should stay pushed in for the brush to rotate. The insert moves in an out as we ... Dyson DC39 Animal Canister Vacuum

Start button wont stay on. Is there a trick to


Have a look at:\015\012\015\012http://www.dysonmedic.com/DC07%20Folder/DC07%20Motor%20change.html\015\012\015\012 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My dyson wont stay on


You have a defective switch, they are fairly easy to replace but i would call and sheck you probably still have it under warranty and can get it done for free\015\012\015\012Hope this helps ... Vacuums

I have a miele S712 (2 yrs old worked fine yesterday) - I had been doing some diy work inside and had the vac on just to reduce some of the dust in the air - after a while the vacuum fizzled out. I guessed it had overheated and took it outside to cool down - when I tried to turn it back on pressing the power button gives it power and it starts to **** but it won't STAY on, soon as you release the power button it stops, and the orange bag indicator is showing full. As I have a compressor I took


You have got dust in the micro switch and it is not latching on, if you look at this and clean it, that will solve your problem, however blowing the motir has probably wrecked the motor bearings. ... Miele Vacuums

Wont stay powered on


He is right - some parts for these are near impossible to find..\015\012\015\012Did he mention what parts are not obtainable ?\015\012\015\012This is a decent site that has allot of parts available -- ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1130 seconds