Having problems with your Dyson Ball DC24 Bagless Upright Vacuum ?

Dirt is being sucked into the cleaner but not reaching the clear bin


Answers :

Hi,

Here\012is a tip that I wrote about my Bissel but I bet you have the same\012problem and the hose is clogged...

Bissell Bagless Upright\012
Vacuum\012not working

heatman101\012

Repair Help & Product Troubleshooting for Dyson Ball DC24 Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dirt is being sucked into the cleaner but not reaching the clear bin


Hi,Here\012is a tip that I wrote about my Bissel but I bet you have the same\012problem and the hose is clogged...Bissell Bagless Upright\012 ... Dyson Ball DC24 Bagless Upright Vacuum

My Fantom Thunder upright has a blockage that sounds like it is directly above the dirt bin in the "head". I cannot access it from inside the bin chamber by going up the nozzle with a claw parts retriever. (This is the older model where the cyclone nozzle doesn't come off.) The wand, hose, rear inspection port, and front brush intake are all clear. How do I get the top of the vac off above the dirt bin? I don't see any screws or slots.


... LG Vacuums

Help!!!! i have an older model of the dirt devil bagless quick vac. and it has been working great, just last week i was vaccuming my bedroom and i accidentally sucked up a string belt that goes with one of my capris. and today i emtpied out the dirt cup but it seems the the string belt that was sucked up is not within my reach and whenever i start the vaccum i get this distinctive noise that i've never heard before. help.


It's likely wrapped around the brush\015\012pull out the roller and un tangle it ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum

Vacuum Cleaner sucking dirt out of the cannister instead of into it.


Where you put your hand is supposed to ****.are the filters dirty?if so clean them.disconnect the hose completely from the vacuum and see if you can blow through the hose,if you can't blow through the hos then the hose is clogged.you can run a garden ... Eureka Whirlwind 4496 Bagless Upright Cyclonic Vacuum

I have a Bissell Steam Cleaner that is not sucking up the water when cleaning. I used a full container of water and when it was empty I emptied out the water, only to find very little dirty water in it. I noticed the window, as i used it, seemed like it wasnt sucking up the water. I took the plastic cover off to clean it (it didnt look very dirty in the first place), an i noticed that the grey plastic flap was on but not moving up or down. I thought there may be dirt in it that prevented it from


... Bissell Vacuums

Hi all---I have a Dirt Devil 091020V. there was a problem with the wand where it was the only thing sucking even when it was stuck in the tube it would ****--but nothing from the vacuum end--the diverter was stuck closed I took it apart and found something stuck but in the meantime the torsion spring [I think} fell out and I don't know where it goes--so now only the vacuum works --not the overhead cleaner part.. is there a digram somewhere that can tell me where it goes--I think it might b


... Vacuums

How to disassemble the brush to empty anything that might be stuck inside of the brush? The motor seems to be overheating, all belts have been checked, all airways are clear and the filter is clean. The vacuum is vibrating and releasing a burning smell, but still sucking up dirt. There is nothing stuck on the outside of the brush, but is there a way to check inside of it to see if that is where a clog is occuring?


If there's a burning smell and the belts are fine, the problem is going to be hot wires causing the insulation to melt, or the motor going bad. Discontinue use and have it checked at a repair shop. ... Bissell 6594 PowerForce Bagless Upright Vacuum

Morphy Richards Pets vacuum cleaner, less than one year old. Not sucking, overheating, claims bag is full when it is new. I have looked for blockages but the hose is clear. Can't find anywhere in Aberdeen to repair it


Discovered I had a 3 year warranty on it so got a replacement. Thanks for your helpful advice! ;) ... Morphy Richards Vacuums

Dirt devil vibe steam cleaner wont suck water back up


... Dirt Devil Easy Steamer Upright Wet/Dry Vacuum

My vacuum is not sucking up that good and none of the dirt is revolving in the clear part of the vacuum like it normally does


The normal air flow has decreased considerably. Look for a clog inside the sweeper head and for a plugged HEPA filter (remove it to test) on the outlet. Hope this helps! ... Dirt Devil M084600 Dynamite Bagless Upright Vacuum

Suction problems My Hoover elite vacuum (which is less than a year old) is not sucking up properly. Also, when I detach the tube that goes to the vacuum cleaner so I can add my attachments, it blows OUT dirt through that opening. HELP!


Sounds like a clog right near the front ... Hoover Elite U5061-900 Bagged Upright Vacuum

Electrolux vitesse 1800w bagless upright vacuum cleaner not sucking dirt anymore from the bottom if I'm detaching the hose this works perfectly is just when I insert it in the bottom part this does not work.


... Electrolux Vacuums

My dirt devil easy lite cyclonic does not suck up the dirt or anything on the floor anymore the rollers still roll. It stop sucking.


Check and make sure that the pickup tube from the bottom of the sweeper to the waste cup does not have a clog anywhere you can use a metal coat hanger and straighten it out and carefully run that thru. ... Vacuums

The Dirt Devil Featherlite vacuum cleaner throws up the dirt back out. Sometimes the vacuum cleaner doesn't pick up any dirt


You have a blocked vacuum hose take hose off and out side. Push the garden hose from one end to the other, this will push out the blockage ... Dirt Devil Featherlite Bagless Vacuum M085845Vacuum

On the DC07, the entire cyclone assembly must be removed to empty the dust, debris, etc. collected when vacuuming. On the top of the cyclone is a "trigger" that you lift with your finger to release the bottom catch, which allows a clear flap to open on the "clear bin," thus letting all the debris fall out. My problem is when you lift the finger trigger, it does not release the catch on the bottom. Since the catch won't release, I cannot remove the entire clear bin either from the cyclone.Any sug


Beofre you go to the extent of buying a replacement canister, you can remove the top and using a straightened coat hanger type thing open that bottom lid. Then maybe you can clean the rim and possibly add some silicone spry to loosen things up. Here' ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dirt finder I have a Hoover U6439-900.  After the cleaner was used a few times, the dirt finder light cycles between green and red on the regular setting and will not go to green.  On the sensitive setting, the red light stays on most of the time.  I have tried to run the cleaner to remove any dirt but have not solved the problem.


The sensor may be bad, or it may be coated over with dirt. Re,ove the hose at the back of the vacuum, the head of the sensor is down inside that opening, reach in there and clean it off and see it that corrects the problem, if not replace the sensor ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

I have a Dyson DC17 and the clear bin won't lock into place. The bin is clear, and the filter is clean. I have to hold the bin against the base while vacuuming, which is quite a hassle. Any thoughts?


Is the rubber seal properly seated? ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I have an eye vac professional that will not stay on to **** up the dirt. There is power to the outlet and the blue on/off light does stay on, but in Auto mode if I stick my hand near the dirt sensor it just pulses on and off. I can feel the suction, but it won't stay on. I've unplugged it, removed the dirt bin and filters and nothing works. Help!!!! This is brand new and I've only emptied the collection bin once and it hasn't worked since.


... Vacuums

My vacuum cleaner is not sucking. It's overheated and stopped


In this case it is motor problem, you can sort out only by calling the technician. Call the customer care and check out the cost for repair, if it is very high you can go for a new one and be in peace of mind.Thank you. ... Sanyo Performax SC-U126 Vacuum

Bissell pro heat carpet cleaner clear cover removal


Just lift it up probably suction holding it ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Irobot roomba 500 series not picking up dirt. Filter is clean, brushes clear, small wheel at front is clear. Seems to be operating fine other than not picking up dirt.


Pull roller brushes out .pull off funny looking yellow ends clean hair ect. ... iRobot Roomba 560 Robotic Vacuum

Vacum cleaner not sucking blowing


Take the brushbar off and check the pipe is not blockedhttp://support.vax.co.uk/power-2-upright ... VAX Appliances Vacuums

Change fan belt on dirt devil power reach - Dirt Devil M08245 Power Reach Bagless Upright Vacuum


... Dirt Devil M08245 Power Reach Bagless Upright Vacuum

Manual for dirt devil stick steam cleaner - Dirt Devil PD20000 Stick Steam Cleaner


... Dirt Devil PD20000 Stick Steam Cleaner

My dirt devil vacuum cleaner is not working - Dirt Devil M130000 ''i'' Dual Cyclonic Upright Vacuum Cleaner Vacuum


Please specify whether the vacuum motor does not turn on when you flip the switch or it simply does not have suction. ... Dirt Devil M130000 ''i'' Dual Cyclonic Upright Vacuum Cleaner Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0607 seconds