Having problems with your Dyson Ball DC24 Bagless Upright Vacuum ?

Dyson Ball DC24 brush is not spinning properly...

\015 It spins, but intermittently. it is clean of hair/strings/etc, the grey "spin switch" next to the red power switch is properly depressed... reset ok... but the brush spins only when the handle is held at a certain elevation angle relative to the floor... it is 100% repeatable... closely watch and no other mechanism, switch or link seems to be actuated as it starts and stops while handle is slowly raised & lowered.... suspecting frayed/loose wire in pivot joint??? help??\015

Answers :

Check it out with dyson, they might have others with this prob, just might be under warranty or be a recall..
My advice is simple. Buy a cheap and nasty vacuum cleaner and throw it away when it breaks. My dyson has been nothing but problems since the day my Mother in law bought it for us . Several calls to dyson ,one visit from an engineer, and it is still sitting there brushless. i have tried all the above solutions , reset switch, replaced the reset switch, holding it at various angles , nothing works. If it were a car it would have been recalled, and going with that analagy, if it were a car it would have about 10,000 miles on the clock, too little mileage for us to be guilty of any misuse or over use. this is a seriously over rated product in my opinion so I'm off to the local cheapie shop to buy a throwaway unit
Repair Help & Product Troubleshooting for Dyson Ball DC24 Bagless Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson Ball DC24 brush is not spinning properly...


Check it out with dyson, they might have others with this prob, just might be under warranty or be a recall.. ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson Ball DC24 spin brush works only sometimes.


... Dyson Ball DC24 Bagless Upright Vacuum

BRUSH WILL NOT SPIN ON DC24 - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulties with your DC24. Your machine is equipped with a safety device which shuts off the brushbar if something jams it. To reset it, please follow the steps shown in the video below.This ... Dyson Ball DC24 Bagless Upright Vacuum

Just purchased my Dyson Ball DC24 less then a month ago. Its great when it works. The brush does not spin. At first I was able to get it working after repeatedly pushing the brush button and fooling around with the handle position. Now nothing.


If its still undr warrenty take it back i wonder if the switch is broken or a bad connection .i hope this works thanks ... Vacuums

Brush bar is not spinning - Dyson Ball DC24 Bagless Upright Vacuum


I would first check your filter as a dirty filter will sometimes produce this probIem. If that doesn't work take a look at the brush bar. I don't believe that these ... Dyson Ball DC24 Bagless Upright Vacuum

Brush will not spin - Dyson Ball DC24 Bagless Upright Vacuum


- Look for the reset button on the side of the brushbar housing - there should be a red sticker and a red button. Push it once. It's not gonna stay depressed, it's gonna pop right out - that's normal.\015\012\015\012- Step on the red peda ... Dyson Ball DC24 Bagless Upright Vacuum

Brush wont spin and no suction through hose - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulties with your DC24. This machine is equipped with a safety device which shuts off the brushbar if something jams it. After you've checked the cleaner head for obstructions and removed any thre ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson ball dc24 brush will not rotate - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,Your DC24 is equipped with a sensor which shuts off the brushbar if something jams it. Once you've checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able to reset the m ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson ball dc24 the brush bar is not turning - Dyson Ball DC24 Bagless Upright Vacuum


Hi its Darran at Dyson. With the machine switched off, press the re-set switch on the side of the head, making sure you push the button in as far as you can. When you switch the machine back on and lower it into the vacuuming position, th ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson ball DC24 brushes wont go round - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

HOW TO GET BRUSH OUT OF dYSON DC24 - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,To remove the brush bar from your DC24, please follow the steps shown in the video below. Any threads, hair or other debris can be removed with scissors, but please take care not to damage any of the bristle tufts.I hope this ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson ball cleaner brushes wll not go round - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

My dyson dc animal's brush is not spinning. The machine smells like burning rubber. I believe the clutch has gone out but the machine also only sucks from the top of the hose in the handle. I am wondering if the machine is not locking properly which is causing the brush to not need to spin. If this is the problem how do i fix this problem.


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

My dyson dc 25 ball vacume brush won't turn - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

Just purchased this Dyson dc24 today. brush doesn't spin after gettin tangled in a cord. removed the cord from the brush OK. I have several times: removed the brush and replaced it OK. pushed the red button by the brush. pressed the brush power switch.


When you removed the brush roller dod you examine the end of the actual roller that is opposite from the removal opening. There is a gear that the roller fits over that may have gotten stripped when it became tangled. Check that the gear has not roun ... Dyson Ball DC24 Bagless Upright Vacuum

My Dyson DC 14 is making the horrible "ratcheting"sound only when the brush is engaged on the carpet setting. I have cleaned the brush, so there are no obstructions, the canister is empty and properly on the unit. I checked to make sure all of the "traps" and hoses are clear of obstructions, the belt is on the brush securely and moves freely, the brush itself spins freely, but there is still the "ratcheting" noise. Any other suggestions?


Our DC33 was making the same ratcheting sound immediately upon placing the cleaner/brush head on the carpet. We carefully pulled the beater/brush bar out of the vacuum. Once removed, we pulled the black plastic end off of the center rod. We discovere ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson Ball DC24 brush turns but is loose and makes a very loud noise. Brush seems to be hitting sides of vacume.


You need a new brush and end cap. The brush and end cap can wear or break in time as they are made of plastic. Spares available on Dyson web site. ... Dyson Ball DC24 Bagless Upright Vacuum

New Dyson DC24 ball vac 2nd time using brush stopped rotating when caught on short rug fringe/ no mat'l caught


Hi there,Your DC24 is equipped with a sensor which shuts off the brush bar if something jams it. You can reset the machine by following the steps shown in the video below. You may also want to refer to our online Support guide: ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson dc 40 brush will not turn - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum

Dyson DC24 brush no spinning. Have pressed red button repeatedly, but no response. No hair is in the brush.


Hi, it's Jack from Dyson.\015\012\015\012You may find it useful to try pressing the button in as far as it will go - this should resolve this issue for you. \015\012\015\012However, if you're still experiencing difficulties, p ... Dyson Ball DC24 Bagless Upright Vacuum

Dyson dc 25 brush stopped working - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,I'm sorry to hear you're having difficulties with your DC25. This machine has a sensor which shuts off the brushbar if something jams it. Once you've checked the cleaner head for obstructions, and removed any threads or hair from aro ... Dyson Ball DC24 Bagless Upright Vacuum

Trying to set up my new dc24 dyson ball but brush wont come on and ball doesnt move whats up?


... Dyson Ball DC24 Bagless Upright Vacuum

Dc24 dropped it and brush not turning now - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,I'm sorry to hear you've had difficulty with your DC24. To reset the brushbar, please follow the steps shown in the video below. Please note, the brushbar will not rotate when the machine is standing upright, so recline it into the v ... Dyson Ball DC24 Bagless Upright Vacuum

It.s anew vacuum cleaner Dyson DC24-ball one, bought only a few months ago..but the brush rallied normally only for a few days. We washed the 2 filters but the brush never started to roll. What should do?


Hi there, its Darran at Dyson.It sounds as though you need to re-set the brush bar. It can stop rotating if it becomes obstructed. You need to simply locate the red re-set switch on the side of the cleaner head and push this button righ ... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Dyson dc24i brushes do not work - Dyson Ball DC24 Bagless Upright Vacuum


... Dyson Ball DC24 Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0605 seconds