Having problems with your Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum ?

How do I change the main cable to DC04 MAINS

\015 How do I change the main cable to DC04 MAINS CABLE [DYN0418468] dyson\015

Answers :

Have a look at this link:
Repair Help & Product Troubleshooting for Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HOW DO I CHANGE THE MAINS POWER CABLE ON A DYSON DC07? my wife cought the cable under the dyson and has stripped it to bare wires so i need to change the cable. i have taken a cover off near where the cable goes into the machine but now cannot get any further

How to open the cover near the cable for dyson upright vacuum ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do I change the main cable to DC04 MAINS

Have a look at this link:\015\012\015\012http://www.dysonmedic.com/DC04%20Folder/DC04%20Cable.html ... Dyson DC04 HEPA Bagless Upright Cyclonic Vacuum

How do I change the mains cable on a Dyson DC07

... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do I change a mains cable on a sebo K1 komfort

... Sebo K1 airbelt Bagged Canister Vacuum


Have a look at www.dysonmedic.com which has some excellent info on your machine. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Mains cable on dc07

Generally no unless you're a certified electrician. It would involve taking apart the bottom section of the Dyson or wherever the cord leads to, and splicing the cable out of the connection end when you open up the Dyson. Easiest solution is really t ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Dyson dc03 faulty cable The cable from the mains plug to the on/off switch has split and needs to be replaced. How do I gain acess to the switch ? I am a competent engineer but I do not wish to damage the switch/cover to repair/replace acble.

I've never worked on a DC3, but whilst the shape and position of the switches changes from model to model, most are secured the same way.\015\012\015\012If you look closely at the switch cover (the bit you press for on/off), there is usua ... Vacuums

Oreck Orbiter Hi Could you e-mail me a wiring diagram for the Oreck Orbiter please? I need to replace the mains cable & the cable to the motor. Thank you, Helen Eccott.

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=618779&thid=681757\015\012Oreck Orbiter\015\012Posted by eccott on Jun 18, 2008\015\012Hi could you e-mail me a w ... Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum

Dyson dco5 Pulled the unit too hard to get extra flex. The plug is ok changed the fuse. I believe the cable has detached itself from the inside. How can i check the inside of the unit for cable damage

Hi.\015\012\015\012Try this site has manuals on replacing mains rewinder unit on Dc05.\015\012http://dysonmanuals.llc.nu/\015\012\015\012Chris.. ... Vacuums

Central vac our central vac will not work unless the main vac in the garage is switched on manualy.... its sucking fine but i have to switch it off at the main switch in the garage after i have used it normaly i just plug in the hose and vac away and it switches itself off we have just had cable installed with a fisher guy in the walls do you think that would be the problem thanks a lot

It is possible that the low voltage wiring that controls your central vacuum has been damaged during the cable work. You can check to see if the low voltage relay is working by shorting the two terminals together at the unit. Just disconnect the two ... M&S Systems AirVac AVP1200 Platinum Series Central Vac - 12,000 sq ft Bagged Central System Vacuum

My Oreck XL upright is blowing out instead of sucking in. I changed the bag and cleaned the brushes; I also cleaned out the main "pipe." I looked for a place to change settings and couldn't find any, so I know I didn't inadvertently switch something. The brushes seem to be spinning at the correct speed. Thank you, Julia Byrem

... Oreck XL2200 Bagged Upright Vacuum

I have a dyson dc 05 and a wire has come disconnected from the main cable inside the machine how do i get the wheel off to reconnect the cable

In the centre of each wheel there is a different colour plug. This must be removed before the wheel can be pulled off. I used a small screwdriver to prise it out. You will probably damage the plug in removing it but they are easily available online a ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Electrolux z4494 vacuum cleaner mains cable wont stay out

Opened up case as follows:\015\012- Open lid of bag chamber. Remove lid by gentry prising the hinge arms slightly further apart so the hing unclips from the body.\015\0122 deeply recessed screws now accessible at rear edge of bag chamber ... Electrolux Vacuums

Need to change the power cable on hu 4206--its frayed

... Hoover Vacuums

I want to change the power cable on my DC26 -- how ?

... Dyson DC26 Bagless Canister Cyclonic Vacuum

Need to change the motor on dc07 how do you get the motor out I have loosened and taken out all the screws and still cant disconnect the power cable in

Have you looked at www.dysonmedic.com ?\015\012\015\012It has a really good feature on changing a DC07 motor. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Replace mains cable panasonic MC-e 468

No. Once you've removed the screw, the handle just slides off - either backwards or forwards (sorry I don't remember which, but it's obvious when you've got the machine in front of you). ... Vacuums

Changing porter cable 7812 vaccumm power cord

... Porter Cable 7812 Wet/Dry Vacuum

How do i change the switch on porter cable vacum # 7812

... Porter Cable 7812 Wet/Dry Vacuum

Over heating? My 10 gallon 4HP shop vac has started shutting off after about 30 sec. after I turn it on to use. It smells real hot after I shut it off. I have changed the filter and the bag, which did not solve the problem. Any suggestions on what the problem could be? It's only about 31/2 years old and I really don't use it all that much, mainly for getting up dust and cob-webs from my garage.

It sounds like you need to replace the motor in it . thank you for using fixya ... Shop Vac ShopVac 3 HP 2 Stage 10 Gallon--Automotive Wet/Dry Vacuum Vacuum

Trying to replace the mains cable on uproght cleaner mc e468,but having great trouble getting the plastic covers off

First remove handle \015\012single screw rear of cleaner and slide handle horizontally rearwards\015\012remove access cover (2 screws) for electrical connections and switch ... Panasonic Vacuums

Stopped working hello im in france, so my henry has a two pin plug. i feel all that needs changing is a fuse, but i carnt find it. i have taken out every possible screw searching for it but to no luck. iv checked and cleaned wireing and checked cable for nicks. im now begining to think maybe the motor has gone?

Hi!  Sorry you've had to wait so long for a reply, but I've only just stumbled upon your problem.  You probably don't need help any longer, but here goes anyway!\015\012You will not find a fuse, because there isn't one.  If your Henry ... Numatic Henry Bagged Canister Vacuum

The cable needs changing looseconnection can not get into dyson

Hi its Darran at Dyson. In the UK we offer a repair service for £69 which includes parts labour and VAT. If you would like to arrange this, please contact our Helpline on 0800 298 0298. You can also purchase a replaceme ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Changing the main hose on a Dyson DC15 Animal

Hi Bob.\015\012\015\012If you look carefully where hose & elbow jount enter machine you will see a slot.\015\012Rotate elbow so that lug on elbow aligns with slot & pull off.\015\012\015\012 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

How do you get into the switch area of the Dyson DC07 to replace the mains cable?

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0430 seconds