Having problems with your Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum ?

What tool do I need to open a Dyson DC05??

\015 I have a DC05 vacuum cleaner with a few minor promlems which I am sure could \015\012 easily be fixed if I could open it up. The problem is that the fasteners \015\012 (presumably screw heads) are recessed so deeply in the plastic mouldings \015\012 that I cannot reach them with any tools to find out whether I have the right \015\012 one. \015\012 \302\240 \302\240 \302\240Has anyone on this ng ever successfully serviced a DC05 to know what \015\012 tool is needed so I could buy one. \015\012 \015\012Thanks in advance \015\012 \015\012Steve Harvey \015\012 \015\012steveharvey at dsl dot pipex dot com\015\012How to remove wheel to access cable storage area? then ... How to replace eletric cable.\015

Answers :

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=34218&thid=542163
\015\012What tool do I need to open a Dyson DC05??
\015\012Posted by fixdaddy on Apr 24, 2008
\015\012I have a DC05 vacuum cleaner with a few minor problems which I am sure could
easily be fixed if I could open it up. The problem is that the fasteners
(presumably screw heads) are recessed so deeply in the plastic moldings
that I cannot reach them with any tools to find out whether I have the right
one.
Has anyone on this vacuum ever successfully serviced a DC05 to know what
tool is needed so I could buy one.
Thanks in advance
Steve Harvey
Steve Harvey at DSL dot pipex dot com
How to remove wheel to access cable storage area? Then ... How to replace electric cable.
\015\012
\015\012Hello,
\015\012I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
\015\012I checked with some of my contacts in the vacuum business and they told me that it may not be a United States vacuum and it might be a Canadian or European vacuum and may not be customer friendly to service, if you have a contact with a MAC or Snap On dealer or a metric auto store – show them the screw and they might have something to fit or release the screw head, as per the removing of the wheel and replacing the electric cable, check with your local vac dealer or you may want to check with the Dyson dealer website and or phone # listed below:
\015\012http://www.dyson.com/homepage.asp
\015\012Contact Us
\015\0121-866-MY-DYSON
(1-866-693-9766)

\015\012Dyson Customer Care is available 7 days a week.
\015\012· Mon - Fri: 7am - 8pm, CST
\015\012· Saturday: 8am - 6pm, CST
\015\012· Sunday: 9am - 6pm, CST
\015\012[email protected]
\015\012Don – The Vac Man
\015\012Go Ahead. Use Us.
Repair Help & Product Troubleshooting for Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

What tool do I need to open a Dyson DC05??


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=34218&thid=542163\015\012What tool do I need to open a Dyson DC05??\015\012Posted by fixdaddy on Apr 24, 2008\015\012I have a DC ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Pls Help! My Dyson DC05 (Yellow) needs a new wand. Am unsure whether it is the assembly wand or hand one found in spare parts. The wand I need to replace connects the two long hoses together, and NOT the wand which fits onto pickup head. M.thks if you can advise which one I need. Getty rather dusty in my pad!!


... Dyson DC05 Bagless Canister Cyclonic Vacuum

What type of tool do I need to open up the bottom of the Cuisinart DBG-550BCHWS? My on/off and digital clock lights are flashing when I plug the coffee maker in and the maker doesn't not work. I have tried opening and re-closing all compartment doors. Thanks for your help.


Screws are Torqux Tamper-proof/Safety screws size T-10. It's a Torqux \015\012screw with a raised middle requiring a special Torqux wrench. You can buy a T-Handle set at Sears for $35.\015\012\015\012 ... Vacuums

I caught a shoe lace in my Dyson DC17; pulled it free, opened the brush/roller area and cleaned everything but the brush still won't work. Read somewhere that there is re-set button but the only one I found was to switch between the brush / sweep functions. Is there a fuse / connection / part that may need to be replaced?


I don't believe so. Keep trying the reset button. Sometimes the reset sticks. Hope this helps. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

POWER CORD DAMAGED AND NEEDS REPLACING. wHAT IS THE SECRET TO OPENING THE SWITCH MECHANISM ON MY DC03. I LIVE IN A REMOTE AREA AND CAN'T JUST DUCK IN TO A SERVICE AGENT. CHEERS, KINGSLEY DYSON


I am not an expert to this kind of machine but I can share with you this link below which I am sure would be a big help to you. Good luck. http://www.sparesaver.com/help-and-support/dyson-section/dyson-hints-and-tips-451/dyson-dc03-hints- ... Dyson Vacuums

I have Dyson DC05. The plastic clip from handle to the metal pipe is broken. Can this be repaired or do I need to replace the whole metal pipe section? If so where can I do this.


Dear Madam/SirThis is very simple problem. the problem can be solved in a very simple manner.As you have told me that the plastic grip from the handle to the metal pipe is broken.You Can do it near by any welding s ... Dyson Vacuums

Dyson DC05 It is a vaccum cleaner in a perfect condition but recently developed a problem. It sparks and sometimes power goes off while operating. It is clear that the wire is loose but do not know how to open the bracket of the main button on the machine. [email protected]


Hi \015\012try this site http://dysonmanuals.llc.nu/\015\012\015\012It has service manuals for the DC05. ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

I press the on/off switch on the Dyson DC05 and the vauum cleaner switches on unfortunately when I stop pressing it it switches off again. Please advise how I would need to repair this. Many thanks. Regards Michael Segal


If you can make it work by holding the switch down then it must be the switch or a bad connection on it. The only way to find out is unplug the machine from the mains and remove the switch to check it. A replacement should be cheap enough.pete ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

I bought a Euro Pro Shark Steam Vaccum about 3 yrs ago. Now, suddenly, it won't switch on. I checked the power receptacle and tried other receptacles. It still won't switch on. I wanted to open and check the inside but it needs some special tools (and long screw drivers!). Any suggestions on what I could do?


... Euro-Pro S3325 Handheld Steam Vacuum

I need to clean the brush on my dyson upright vacuum. How do I open the area to remove the brush?


3 silver screws on the underside 1/2 turn anti clockwise and remove cover. cut fibres with small scissors und remove pull gently ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

What size torx driver do I need to open up a dyson dc14?


... Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum

Not picking up as well as should be...dyson dc07.... From bottom of powerhead in area of outer clutch actuator the round opening for suction is only open halfway, when I move the outer clutch actuator


... Vacuums

Polti Vaporetto Steam - need to open case


Hi, they are not special polti tools. You need a set torx keys like allen keys with the hole up the centre from any decent tool shop. thats what I use with no problem ... Polti Vaporetto 2400 Canister Steam Vacuum

Dyson canister will not open


... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

I have my vacume electrical cord tangled inside and disconnected (I can see the open end of the connection from the power cord collector wheel! I need to take the vacume apart so get access to the wire inside. I need to know if there is something else to open other than the 4 screws. Your help is highly appreciated in advance.


Since you did not provide a model number for your vacuum, it is difficult to provide any precise directions regarding disassembly.\015\012\015\012However, most vacuum cleaners are fairly straightforward machines, and as long as you unplug ... Vacuums

My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?


Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson dc05 motor cuts out


Hi,\015\012\015\012Check for either voltage to switch or if your not happy or compettant working on live mains.\015\012Switch meter to ohms ensure vacuum is unpluged from mains follow live wire (brown) from plug to exit point on the ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Hoover Max Extract LS F6056900 Hand Tool not working / Cleaning Solution I need to know what I need to get in order to have the hand tool work on this model. Also, what cleaning solution is best for pet stains? Tried cleaning, pre-treating with Spot Shot and towel and/or scrub brush, then cleaning, still doesn't work. PLEASE HELP!!


... Vacuums

Dyson dc05 won't start - Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum


... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

Dyson dc05 electrical fault


Hi Helen,I'm sorry to hear you're having difficulty with your DC05. From what you've described, it sounds as if the machine may have overheated in use - this will occur if the filter needs a wash, or if the machine has a blockage. You should ... Dyson DC05 Bagless Canister Cyclonic Vacuum

I have a Dyson Animal upright (purple). I took it apart to clean the cyclone chambers. When re-assembling the bottom closed before the opening rod was inserted. I can't get the opening rod installed with the bottom opening closed. How do I open it? Thanks.


I looked in our DC07. I would try removing the top again and getting a long dowel or the opening rod, insert it down into the unit and PUSH. The opening rod opens the latch by pushing it, not pulling it. Here are some pictures of the latch. Top pi ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Need to open rotating brush part of vacumm as motor functioning but roller not turning...perhaps belt broken put need to get into ..inside brush box ...Need help need instruction with diagrams Thanks for help Robert


... Panasonic MC-V9638 Bagged Canister Vacuum

I need to replace the brushbaron my DC17 Animal model Dyson. It's almost four years old. I can't find the correct part number on the Dyson Website and I can't seem to find a Dyson repair center in Albuquerque, NM. What are my alternatives? If I can't service this machine without returning it to Dyson, I won't ever buy another one.


Hi,\015\012\015\012The original Dyson part number for the brush bar (often called brush roll) is: 911961-01\015\012\015\012If you type the above part number into Google Products (click link below) you will get a list of suppli ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Taking apart dc05 dyson vacuum cleaner


You have to take the wheels off first to get at two securing screws on each side of the cleaner. First of all remove the plugs in the centre of each wheel (you will probably damage them prizing them out but they are available online as replacements i ... Dyson DC05 Cylinder Bagless Canister Cyclonic Vacuum

CARPET/fLOOR tOOL Electrolux Hoover Model EV4602. Need to buy the plastic connector from stainless steel tube to the Carpet/Floor tool. If necessary buy a new floor tool We live in Cape Town do you know a stockist for spare parts for Elecrolux Hoovers near to us


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0561 seconds