Having problems with your Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum ?

Have a Dyson DC07 vacuum. The beater bar won't turn. Belt is good.


Answers :

DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.
Unfortunately one of the belts is hidden under a plastic cover, so you cant see if it is okay or not without some dismantling. This cover is not easy to remove and requires a Torx driver to under the securing screws.
\012If both belts are okay, you have a faulty clutch. Replacement clutches are avaible reasonably cheaply on eBay, but again requires Torx drivers to remove and good DIY skills.
Have a look at www.dysonmedic.com, but unless you have access to such tools, probably time to call Dyson or a Vacuum repairer.
Repair Help & Product Troubleshooting for Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I HAVE A DYSON DC07 I HAVE CHECKED ALL HOSES AND PLASTIC ATTACHMENT SECTIONS , CANNOT FIND ANY BLOCKAGE ANYWHERE IN THE SYSTEM .THE BELT IS GOOD AND THE BEATER BAR IS ROTATING WELL , BUT THIS VACUUM WILL NOT PICK UP ANY THING. I DID NOTICE THAT THE HEPA LIFETIME FILTER IS BLACK AND NOT SURE IF IT CAN BE WASHED OR CLEANED. THANKS BOB!


I have just cleaned mine just a half an hour ago - SAME PROBLEM !!\015\012ok take the dust cylinder off the vacuum cleaner and take the plastic clear cylinder off - there is a clear clip one side and you might need a small knife to unclip other ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Have a Dyson DC07 vacuum. The beater bar won't turn. Belt is good.


DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.Unfortunately one of th ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Our Dyson upright vaccumms beater bar wont move. the vaccumm will **** up air but the bar underneath wont move. The gears are not working property.


It could be the clutch that's causing the problem or the belt. Bring your vacuum to a local repair shop and have it look at, but it sounds like it could be either one of those problems. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Is there any way to unfreeze the beater bar on a dyson dc07


... Dyson DC07 Allergy Blue/Turquoise Bagless Upright Cyclonic Vacuum

Beater bar not spinning on my dyson animal DC14. Motor turns on and sounds good. My belt is not broken, and still tight on the bar. It looks like another possible belt or gear box between motor and bar. Can anyone please point me to next step?


... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Dyson animal beater bar not working - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the belt ok that drives it , is the clutch ok this video will give you instructions how to fix ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc25 beater bar wont turn - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The beater bar will not turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hello rebh. Generally when the vacuum beater bar will not turn it is because the belt that turns this beater bar has broken. \012\012That said, most of the dyson's require you to buy a beater bar assembly which includes the belt. Any ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar will not turn - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar doesn't move - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi,\012There are two things that can go worng tthat will stop the beater bar...\012The belt broke...or..\012the motor went bad...\012\012heatman101 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The beater bar won't turn - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Replace the belt - it is broken or has a flat spot on it. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Beater bar not turning, making loud sound - Dyson DC07 Bagless Upright Cyclonic Vacuum


This machine has a clutch assy. that slips and makes a loud noise\015\012when something gets stuck in the roller brush. If you have nothing stuck in the roller brush chances are the clutch is worn and needs\015\012replacing. Not an easy ... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do you clean beater bars dc07 animal - Dyson Ball DC24 Bagless Upright Vacuum


Hi there,To clean the brushbar of your DC07 Animal, please follow the steps shown in our online Support guide: ... Dyson Ball DC24 Bagless Upright Vacuum

BEATER BAR QUIT WORKING ON DYSON DC07 VACUUM CLEANER - DIDN'T KNOW IF THERE WAS A RE-SET SWITCH OR HOW TO GET THIS TO WORK AGAIN


Hi its Darran at Dyson. From your description of the problem, either the brush control has been switched off (dial on the side of the cleanerhead) or the belt has snapped which may indicate a problem with the clutch. Please ca ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Hi my dyson dc07 animal has suction but the brush bar wont turn. If I turn it on there is a horrible noise. The belt is still fine


The belt is probably worn or stretched. When this happens the belt won't turn\015\012the roller brush when it is against the carpet. Here is a link for the\015\012manual and links for the belt ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar wont spin - Dyson DC14 All Floors Upright Vacuum Cleaner


Hello rud.... this is due to either a broken belt or lots of carpet fibers or pet fur in the beater bar mechanism. turn it off, unplug it and then turn it on it's side and check to see if the bar turns freely by hand. if it does, you will have to ... Dyson DC14 All Floors Upright Vacuum Cleaner

Hello. i only have one arm and am trying to figure out why my beater bar wont turn on my dyson dc14. the belt smells a little too. thanx, trixie


Sounds like the beater bar is frozen in place. This sometimes happens when the ends of the bar become stuck in the holders.\015\012The solution is to remove the beater bar and clean the small holders on each end removing any debris that has built up ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Beater bar won't work - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar does not work dyson DC07


If the beater bar does not spin freely, and the belt still seems to be in place, then you may not need a new clutch, but you may need to reset the clutch.  This is done very simply by keeping the beater bar section of the vacuum flat on the floo ... Dyson DC07 Bagless Upright Cyclonic Vacuum

The beater bar will not rotate - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Beater bar not spinning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


That means that the belt has stretched or broken and it needs to be replaced. Here is a link the belt you need and the manual which has instructions:Dys ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Beater bar on my Dyson DC07 is not moving. How can it be repaired?


Hi there, \012This is not an easy question to answer in text form. I have made a video to show you how tostrip apart the brush and clutch section of your ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Beater bar not working. suction not working - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Check for a broken beater brush belt.\015\012Clean the beater brush, clear of all debris and add some WD40 at each end where the rubber holders are. Turn beater brush by hand to work the WD40 into the axle.\015\012Reassemble making sure the belt is ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Dyson dc07 beater bar want spin - Vacuums


Hi there,I'm sorry to hear you're having difficulties with your DC07. Please note, the brushbar will not rotate when the machine is standing in the upright position, or if you have the brush control set to 'Hard Floors'. If the brush control ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0500 seconds