Having problems with your Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum ?

Dyson dc07 brush not turning belt is intact? - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Answers :

DC07s have two drive belts that turn the brush bar - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.
You can check the latter simply by removing the sole plate and looking. Unfortunately the other belt is hidden under a plastic cover, so you cant see if it is okay or not without some dismantling. This cover is not easy to remove and requires a Torx driver to under the securing screws.
If, after removing the cover, the other belt is okay, then you have a faulty clutch. New clutches are available on eBay reasonably cheaply, but again good tools and DIY skills are required.
Have a look atwww.dysonmedic.com which has some excellent info on dismantling and repairing a DC 07, but unless you have access to such tools, and feel confident to tackle it, it's probably time to callDyson or a Vacuum repairer.
Repair Help & Product Troubleshooting for Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dyson dc07 brush not turning belt is intact? - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


DC07s have two drive ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

DC07 brush does not turn - belt intact - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there, The problem is likely to be \012a) The selector on the front of your machine is set to hard floors\012b) The ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush doesn't fluff my carpet - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


That means that the belt is worn or stretched and it needs to be replaced. This belt should be replaced yearly. It's easy to do - Here is the belt you need and the manual with instructions: ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Brush wont spin - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Hi there VacuumGuru here. The key things to check are roller brush bearings, belt and clutch. It is a li ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

How to put new cable on dyson dc07 upright - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Have a look at www.dysonmedic.com which has some excellent info on your machine. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

No suction on dyson dc07 - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

My dyson dc07 brush is not spinning - Dyson DC07 Bagless Upright Cyclonic Vacuum


... Dyson DC07 Bagless Upright Cyclonic Vacuum

How do i fix the on/off button on my dyson. - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Greetings,Most likely your switch has gone bad, and you'll need to replace the on/off switch on your Dyson DC07. If you have to hold down the switch in order to keep the ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Brushes will not turn on dyson dc 18 - Dyson DC18 all floors Bagless Upright Cyclonic Vacuum


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

How to replace brush bar motor on dyson dc15 - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

How to change brush belt on dco7 dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


This depends on whether your DC07 has a brush control clutch or not. For excellent illustrated guidance go to www.dysonmedic.com and click on DC07. For belt change on a model without clutch click on "belt and brushroll". It's simple! For models with ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have Dyson DC15 ,Brush not working - Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum


... Dyson DC15 All Floors - The Ball Bagless Upright Cyclonic Vacuum

Can i use my dc07 on wet floor - Dyson DC07 Bagless Upright Cyclonic Vacuum


No.. It was not designed to pick up fluids.. I suggest a ved-dry vac..\015\012\015\012have a great day ! ... Dyson DC07 Bagless Upright Cyclonic Vacuum

"CHANGING CARBON BRUSHES ON A DYSON VAC" - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You dont need to replace with new motor,i just replace the brushes not had no problem yet.. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Brush doesn't spin. no suction felt at brush - Dyson DC14 All floors Bagless Upright Cyclonic Vacuum


Check that the brush has not become fouled with string, etc. If it still doesn't work try the following.\015\012\015\012Some Dyson's have a switch for the brush on the front of the handle. If yours does, please make sure its on. This m ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

How do you change the belt on a dyson DC 07 - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.I suspect the belt you ar ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Dysin dc07 the power button is broken - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Switches are available if you search on eBay for a few pounds, and if you've ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Dyson Animal handheld brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.We would recommend checking it for a blockage and a removing any hair or fibres from the brush bar. As the brush bar relies on the suction power of your machine, it would be worth cleaning the filter and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The brush quit turning while i was vacuuming - Dyson DC07 Bagless Upright Cyclonic Vacuum


Could be some debris is caught in brush or belt broke. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Low vacuum will not pick much of anything - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Brush is not turning - Dyson DC07 Bagless Upright Cyclonic Vacuum


Remove the bottom brush cover and replace the belt. ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Brush not rotating - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Drive belt is broken . Google search for dc07 belt replacement , you will find guide to replace belt ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Carpet bar doesn't turn - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


This is either a broken belt, or a faulty clutch.\015\012\015\012DC07s have two belts - one connects the output of the motor to the clutch, the other connects the clutch to the brush bar.Unfortuenately one of the belts is hidden und ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Beater brush will not work - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The beater bar won't turn - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum


Replace the belt - it is broken or has a flat spot on it. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1251 seconds