Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

Moter cuts out after a few minutes - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Answers :

The motors have a "trip" to protect them, and you if a serious problem caused a fire, which can be tripped if the filters are blocked and causing the motor to overheat.
\015\012The filter at the top of the cyclone (the bit on top of the dust container) should be cleaned regularly (more often than Dyson suggest), and under the dust container you may not have noticed there is another filter - called the post motor filter. This isn't mentioned in the user book but does get clogged after a few years of use. It can be removed and can be replaced - eBay has companies that can help.
\015\012If all filters are clean and okay, it is probably the early stages of complete motor failure. If you're good at DIY, the site www.dysonmedic.com has some good info on how to change a motor. Again, eBay will help find a motor.
\015\012If you dont fancy having a go, either ring Dyson or a local vacuum repair company.
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Thermal cut out on dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Moter cuts out after a few minutes - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


The motors have a "trip" to protect them, and you if a serious problem caused a fire, which can be tripped if the filters are blocked and causing the motor to overheat.\015\012The filter at the top of the cyclone (the bit on top of the dust con ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Change belt on dyson dc07 animal - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson animal dc07 is over heating - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do I change belt on dyson DC07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal is not powering up - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


It might be the eletrical inside the machine.or even the power cord. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal handheld brush not turning - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.We would recommend checking it for a blockage and a removing any hair or fibres from the brush bar. As the brush bar relies on the suction power of your machine, it would be worth cleaning the filter and ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson animal beater bar not working - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Is the belt ok that drives it , is the clutch ok this video will give you instructions how to fix ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do i empty a dyson root cyclone - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson level 3 root cyclone - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do i fit forward lock on dyson dc07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Replacing dyson dc07 duct assembly - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How to dismantle a dyson dc07 cyclone - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi there,We wouldn't recommend attempting to dismantle your Dyson's cyclone assembly as this may cause damage. If you feel your machine isn't working as well as usual, I'd encourage you to get in touch with us directly so we can help - you ca ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Cant lower handle on my dyson dc07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson root 8 cyclone overheats and shuts off - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Loss of suction on dyson animal hose - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


There may be an obstruction in the hose. Hold it up to the light then I use a long thin broom handle to push the clogged hair through it, being careful not to split the hose. This always does the trick for me. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Replace power cord on Dyson DC07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


The following link will take you to an article on how to change the motor on a DC07. Look at photos 4, 5 and 6 which shows how to disconnect the power cord.\015\012\015\012 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson dc07 cuts out after a few minutes ? - Dyson DC07 Bagless Upright Cyclonic Vacuum


There is a cut-out device on the motor which senses when too much current is being drawn, which in your case sounds like it is tripping because the motor is developing a fault and will likely fail completely soon.\015\012\015\012New motor ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Replace belt on dyson animal - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Why does my dyson DC07 not **** anymore ? - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson. If you are experiencing a drop in performance, please follow the full diagnostics outlined in the support section on our website at www.dyson.com. If this does not resolve the issue, please contact our ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

How do i empty my dyson dc07 - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi its Darran at Dyson.Remove the bin and cyclone assembyl by pressing the release button above the word Dyson on the carrying handle towards the machine. Then hold the bin and cyclone assembly over a dustbin and pull the trig ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

"CHANGING CARBON BRUSHES ON A DYSON VAC" - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You dont need to replace with new motor,i just replace the brushes not had no problem yet.. ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson in making a really awful noise. - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


You may want to open up the bottom where the floor brush is and check the condition of the belt and as to whether or not something is caught in the belt or beater brush. The owner's manual should provide directions on changing the belt. While y ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Cannot put handle on dyson - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi,Did you receive the handle with the wand already attached? It should be. Then, to get it into the hose pres the wand release button on the end of the hose and slide the wand into the hose. The wand should then be pushed into the slot o ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

DC07 brush does not turn - belt intact - Dyson DC07 Animal Bagless Upright Cyclonic Vacuum


Hi there, The problem is likely to be \012a) The selector on the front of your machine is set to hard floors\012b) The ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3430 seconds