Having problems with your Dyson DC07 Animal Bagless Upright Cyclonic Vacuum ?

The on button won't stay pressed

\015 As soon as I release the on button it doesn't stay on\015

Answers :

Faulty switch, undu the screw with a torx driver where the handle sits and unclip the switch cover out at both sides, be careful not to break it,
\015\012where the switch is situated they may be a spring, also test the button, if no good replace
Repair Help & Product Troubleshooting for Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Power button wont stay on. have to hold the power button manually for it to stay on.


Most likely you have to replace ON/OFF switch. look at detail instructions how to do it on our website:http://www.goodvac.com/kb_results.asp?ID=18 ... Kirby Ultimate G Bagged Upright Vacuum

My dyson animal vacuum (~9 years old) will not stay on. I press the on/off button and it will only stay on as long as I am holding the button down. Help please!


Hi it sounds like you need a new switch ... Vacuums

Tried pressing in red button and switch next to on button to get roller working but not made any difference - still wont turn (any no suction)


Hi there,I'm sorry to hear you're having difficulty with your DC24. If you haven't been able to reset the brushbar using the reset switch on the cleaner head, I'd encourage you to get in touch with us directly so we can provide further assist ... Dyson Ball DC24 Bagless Upright Vacuum

Start button wont stay on. Is there a trick to


Have a look at:\015\012\015\012http://www.dysonmedic.com/DC07%20Folder/DC07%20Motor%20change.html\015\012\015\012 ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I have a miele S712 (2 yrs old worked fine yesterday) - I had been doing some diy work inside and had the vac on just to reduce some of the dust in the air - after a while the vacuum fizzled out. I guessed it had overheated and took it outside to cool down - when I tried to turn it back on pressing the power button gives it power and it starts to **** but it won't STAY on, soon as you release the power button it stops, and the orange bag indicator is showing full. As I have a compressor I took


You have got dust in the micro switch and it is not latching on, if you look at this and clean it, that will solve your problem, however blowing the motir has probably wrecked the motor bearings. ... Miele Vacuums

Simplicity vacuum My vacuum just cut off and now it wont start. I pressed there restart button but nothing happens I have 2 fairly old Industrial hitachi dry vacuum in my workshop both 110v and both wont start. Both i was told were manufactured in Italy and both have a manual and auto switch. It has a black top, takes an orange paper filter inside and its bin is dark blue. Sorry i've forgotton the model number. I've inspected the wiring but it's fine, could it be the motor and how do i gain acc


Just take it in to your vacuum store. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

The on button won't stay pressed


Faulty switch, undu the screw with a torx driver where the handle sits and unclip the switch cover out at both sides, be careful not to break it,\015\012where the switch is situated they may be a spring, also test the button, if no good replac ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson Animal on button wont stay on.


That's the problem with dyson. They work for the first few months then start to break down. Your switch might need replacing or your cord connection is lose and causing it to short out and turn off. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson will not stay on when i press the button.


\015\012OK...so while I'm sure that hitting the power button w/ a mallet will work...I was having the same issue and felt uncomfortable hitting my very expensive Dyson w/ a mallet. \015\012Here is what I did to fix the problem\015\01 ... Sharper Image Dyson Slim DC18 All Floors Vacuum

Simplicity vacuum My vacuum just cut off and now it wont start. I pressed there restart button but nothing happens


Could be a bad cord or a switch problem. Could also be a problem with the motor. Will have to checked to find the right problem. ... Vacuums

Broken power button. stays on if you keep it pressed!


Model make please ? ... Vacuums

No voltage to pump motor when the surface stain button is pressed, the unit is on and the green light for the pump is lit and stays lit.


You may want to contact one of BISSELL's Authorized Service Centers for assistance. Here's a link to locating one.\015\012http://www.bissell.co ... Bissell SpotBot Robotic Wet/Dry Vacuum

My dyson wont stay on unless i hold button down


... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Bissell proheat 2x rug cleaner wont spray water out on rug when you press button


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 8910 ProHeat Clear View Upright Vacuum

My i-P23 quicksilver alarm clock speaker, won't turn on. I press the button and it wont play music. I even tried a new outlet plug, and it still won't turn on.


... Vacuums

When pressing the ON button, the machine will not stay on. It will only if I hold the red on botton down.


Most likely the ratchet mechanism on the switch is faulty.Switches are available if you search on ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Dyson will not stay powered on unless power button is continuously pressed. Is this a switch malfunction or something else?


Yes, you probably need to replace the switch - call the Dyson helpline, they'll give you the info for your closest authorized repair dealer who will open it up and replace the switch for you. ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum

Hi, pressing the big red foot button on the dc25 lowers the cleaner to the working position,but it wont stand up again. would appreciate some help. thanks. TC


Sounds like the ball cradle is worn out, the springs are too stretched to pull the handle release pedal back into place. you can do one of two things, replace the cradle assy, or just lift the red pedal up when you raise the handle ... Dyson DC25 All Floors Bagless Upright Vacuum

Does not stay on when on/off button pressed - Dyson DC17 Animal Bagless Upright Cyclonic Vacuum


Hi,\015\012\015\012A new switch costs about $8 and can be replaced easily however not something that you can do at home if not capable. Dyson might be your first port of call as this is a known issue with the dc17.\015\012\015 ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My dyson vac will not stay on. When the on button is pressed it is on but as soon as you take your finger off it turns off. Can this be fixed and how


It needs a switch. You can get one for three pounds here: Dyson DC07 Spares ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

MY Devant 2GB MP4 player wont turn on, but when i plug it to a computer it turns on and charges then after an hour i tried pressing the on button, it does not work


... Vacuums

Wont shut off when I press the power button - Dirt Devil Featherlite Deluxe Bagged Upright Vacuum


I need to know how to change the belt on a Dirt Devil Upright Feather Lite Deluxe Vaccum cleaner; unable to find the manual. ... Dirt Devil Featherlite Deluxe Bagged Upright Vacuum

My dyson dc14 wont stay running. if you hold power button down it runs. cleaned filters and brush and the belt is not broke. any advice on solving the problem?


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Vax hoover the on off button wont stay on


... VAX Appliances Vax X5 Bagless Upright Cyclonic Vacuum

My Electrolux Epic 6500 SR will not turn off by pressing on the switch button. I took it apart and removed the switch assy. I can maunually turn it off & on by pressing the rocker arm on the switch assy. It appears that the problem is with the big blue operator button, not the switch assy itself. The button does not seem to press down enough to cause the rocker arm to switch. The button has a "U" shaped wire that presses on the rocker arm and it may have some broken plastic details at the b


WOW !!! Finally You are dead on, absolutely 100%.... good work!!!.Get only a genuine new switch button with spring from an AERUS Electrolux dealer and reinstall. Then carefully reassemble the entire body and wiring harness.Con ... Electrolux Epic 6500 Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0406 seconds